BERNINA Sewing Machine Fabric Problem

BERNINA sewing machines are known for their precision, accuracy, and high-quality stitching. However, even the best machines can encounter problems while sewing. One of the most common problems faced by BERNINA sewing machine users is the fabric not feeding properly through the machine. This problem can be frustrating, especially if you’re in the middle of a project. In this article, we will discuss the 10 most common causes of this problem and provide detailed instructions on how to fix them.

List of the 10 Most Common Causes of BERNINA Sewing Machine Not Feeding Fabric

1. Bernina thread tension is too tight
2. Bernina needle is not inserted correctly
3. Bernina needle is bent or dull
4. Bernina feed dog is not lowered
5. Bernina bobbin is not inserted correctly
6. Bernina bobbin case is not inserted correctly
7. Bernina bobbin thread is not correctly threaded
8. Fabric is not properly aligned
9. Bernina sewing machine is not properly lubricated
10. Bernina sewing machine is not properly threaded

Causes of BERNINA Sewing Machine Fabric Problem

The symptoms of this problem are that the fabric does not move through the machine when you start to sew, or it moves very slowly, causing uneven stitches. The fabric may also get stuck under the needle, causing it to jam or break. Here are the 10 most common causes of this problem:

BERNINA Thread Tension Is Too Tight

When the thread tension is too tight, the thread can’t move smoothly through the machine, causing the fabric to get stuck or not move at all. To fix this problem, you should:

1. Check the thread tension setting and adjust it as necessary. The correct setting will depend on the fabric and thread you’re using, so consult your machine’s manual for guidance.
2. Check that the thread is threaded correctly through the tension discs, making sure there are no knots or tangles in the thread.
3. Check that the bobbin thread is correctly threaded through the bobbin case and that the bobbin is inserted correctly in the machine.

BERNINA Needle Is Not Inserted Correctly

If the needle is not inserted correctly, it won’t be able to pick up the thread properly, causing the fabric not to move. To fix this problem, you should:

1. Turn off the machine and unplug it for safety.
2. Remove the needle and check that it is the correct size and type for the fabric and thread you’re using.
3. Insert the needle correctly, making sure it is all the way up into the needle holder and that it is facing the correct direction.

BERNINA Needle Is Bent or Dull

If the needle is bent or dull, it won’t be able to pierce the fabric properly, causing the fabric not to move. To fix this problem, you should:

1. Turn off the machine and unplug it for safety.
2. Remove the needle and check that it is straight and not damaged. If it is bent or damaged, replace it with a new needle.
3. Make sure the needle is the correct size and type for the fabric and thread you’re using.

BERNINA Feed Dog Is Not Lowered

The feed dog is the metal teeth under the needle that move the fabric through the machine. If the feed dog is not lowered, it won’t be able to grip the fabric properly, causing it not to move. To fix this problem, you should:

1. Check that the feed dog is raised. If it’s not, raise it according to your machine’s manual.
2. Check that the fabric is placed correctly on the feed dog. Make sure it’s positioned correctly so that the feed dog can grip it properly.

BERNINA Bobbin Is Not Inserted Correctly

If the bobbin is not inserted correctly, the machine won’t be able to pick up the thread properly, causing the fabric not to move. To fix this problem, you should:

1. Turn off the machine and unplug it for safety.
2. Remove the bobbin case and check that the bobbin is inserted correctly.
3. Make sure the bobbin is the correct size and type for your machine.

BERNINA Bobbin Case Is Not Inserted Correctly

If the bobbin case is not inserted correctly, the machine won’t be able to pick up the thread properly, causing the fabric not to move. To fix this problem, you should:

1. Turn off the machine and unplug it for safety.
2. Remove the bobbin case and check that it is inserted correctly.
3. Make sure the bobbin case is clean and free of lint or debris.

BERNINA Bobbin Thread Is Not Correctly Threaded

If the bobbin thread is not correctly threaded, the machine won’t be able to pick up the thread properly, causing the fabric not to move. To fix this problem, you should:

1. Turn off the machine and unplug it for safety.
2. Remove the bobbin case and check that the bobbin thread is threaded correctly through the tension spring and into the bobbin case.
3. Make sure there are no knots or tangles in the bobbin thread.

Fabric Is Not Properly Aligned

If the fabric is not properly aligned, the machine won’t be able to grip it properly, causing it not to move. To fix this problem, you should:

1. Make sure the fabric is positioned correctly under the needle and that the edges are straight and even.
2. Make sure the fabric is not bunched up or folded over on itself.
3. Make sure the fabric is not too thick or heavy for your machine.

BERNINA Sewing Machine Is Not Properly Lubricated

If the machine is not properly lubricated, it can cause the parts to rub against each other and not move smoothly, causing the fabric not to move. To fix this problem, you should:

1. Refer to your machine’s manual to locate the oiling points.
2. Use only high-quality sewing machine oil recommended by the manufacturer.
3. Apply a small drop of oil to each oiling point, as indicated in the manual.
4. Run the machine for a few minutes to distribute the oil.

BERNINA Sewing Machine Is Not Properly Threaded

If the machine is not properly threaded, the thread won’t be able to move through the machine properly, causing the fabric not to move. To fix this problem, you should:

1. Refer to your machine’s manual to ensure that the machine is threaded correctly.
2. Make sure the thread is correctly inserted through the tension disks and the take-up lever.
3. Check that the thread is not tangled or knotted.
4. Make sure the presser foot is raised when threading the machine to ensure proper tension on the thread.

Tips for Preventing BERNINA Sewing Machine Fabric Problem

Preventing fabric feed problems with your BERNINA sewing machine is easy if you follow these tips:

• Use the correct needle size and type for the fabric you’re sewing.
• Use high-quality thread that is appropriate for the fabric you’re sewing.
• Clean your machine regularly and remove any lint or debris that may have accumulated.
• Use the correct tension setting for the thread and fabric you’re sewing.
• Make sure the presser foot is down when sewing to ensure proper tension on the fabric.
• Align your fabric properly and avoid sewing over thick or uneven seams.

10 Common Problems with BERNINA Sewing Machines

In addition to the common problems listed above, BERNINA sewing machines can also experience the following issues:

1. Stitch Problems
2. Sewing Machine Parts Problems
3. Upper thread breaking
4. Breaking needles problems
5. Bobbin winding problems
6. Bobbin thread problems
7. Bobbin holder problems
8. Bobbin tension problems
9. Sewing Machine Keep Jamming
10. Tension problems

FAQ

Why won’t my BERNINA sewing machine feed fabric?

There are many reasons why your BERNINA sewing machine may not be feeding fabric. Some common causes include thread tension that is too tight, a needle that is not inserted correctly, or a feed dog that is not lowered.

How do I fix a BERNINA sewing machine that won’t feed fabric?

The solution to your problem will depend on the cause of the issue. Some possible solutions include adjusting the thread tension, inserting the needle correctly, or lowering the feed dog.

Can I use any needle with my BERNINA sewing machine?

No, you should always use the correct needle size and type for the fabric you’re sewing. Using the wrong needle can cause fabric feed problems and other issues.

How often should I clean and lubricate my BERNINA sewing machine?

You should clean and lubricate your machine after every project or at least once a month if you use it regularly. Refer to your machine’s manual for specific instructions.

How do I know if my BERNINA sewing machine needs servicing?

Some signs that your machine may need servicing include fabric feed problems, unusual noises, or difficulty in making stitches. If you’re experiencing any of these issues, it’s best to take your machine to a professional for servicing.

Conclusion. BERNINA Sewing machine fabric problem

Fabric feed problems with your BERNINA sewing machine can be frustrating, but they are often easy to fix. By following the tips in this guide and taking proper care of your machine, you can prevent these issues from occurring in the first place. If you do experience problems, don’t hesitate to consult your machine’s manual or take it to a professional for servicing. With a little care and attention, your BERNINA sewing machine can provide you with years of reliable service.