ELNA Sewing machine breaking needles

ELNA sewing machines are popular for their quality, durability, and precision. However, even the best machines can experience issues with needles breaking. This problem can be frustrating, especially when you’re in the middle of a project. In this article, we will discuss some common problems that can cause needles to break on the ELNA sewing machine and how to solve them.

List of the 10 main causes of breaking needles problems for the ELNA Sewing Machine

Here is a list of the main causes of breaking needle problems for the ELNA Sewing Machine:

Damaged or bent needle: A damaged or bent needle can easily break when sewing.

Dull needle: A dull needle can also break easily, especially when sewing with thick fabrics.
Incorrect needle size for fabric: Using the wrong needle size for the fabric you are sewing can cause the needle to break.
Incorrect needle and thread combination: Using the wrong needle and thread combination can also cause the needle to break.

Wrong sewing machine thread tension: Improper thread tension can cause the needle to break.
Incorrect presser foot: Using the wrong presser foot can also cause the needle to break.
Incorrect needle insertion: Improper needle insertion can cause the needle to hit the bobbin case or hook, causing it to break.

Needle not aligned with the center of the foot: If the needle is not aligned with the center of the foot, it can cause the needle to break.
Needle is too long or too short: Using a needle that is too long or too short can cause the needle to break.
Incorrect machine timing: If the machine’s timing is off, it can cause the needle to hit the bobbin case or hook, causing it to break.

It is important to properly diagnose the cause of the problem in order to effectively address the issue and prevent further damage to the machine.

Common Problems Causing A Needle Break in Sewing Machine ELNA

Here you can find all the 
parts and accessories for the ELNA Sewing Machines
guaranteed to fit your sewing machine

The needle on sewing machine ELNA is damaged, bent

A damaged or bent needle can cause the machine to break needles. This may happen if the needle hits a pin or if it is not inserted correctly.

Reason: The needle is designed to go up and down through the fabric at a high speed. If the needle is bent, it can hit the bobbin case or the hook, which can cause it to break.

Solution: Replace the damaged or bent needle with a new one. Make sure to insert the needle correctly, with the flat side facing the back of the machine. Also, ensure that the needle is the correct size for the fabric you are working with.

The needle on sewing machine ELNA is Dull

A dull needle can cause the machine to break needles. This may happen if the needle has been used for a long time or if it has hit a hard object such as a pin.

Reason: A dull needle can cause the machine to push the fabric instead of piercing it, which can lead to breakage.

Solution: Replace the dull needle with a new one. Make sure to choose the right needle size and type for the fabric you are working with. Also, avoid using old or worn-out needles.

Incorrect ELNA needle size for fabric

Using the wrong needle size for the fabric can cause the machine to break needles.

Reason: If the needle is too small, it may not be able to pierce through thick fabrics, and if it is too large, it may cause the fabric to pucker or tear.

Solution: Choose the right needle size and type for the fabric you are working with. ELNA sewing machines come with a guide that recommends the right needle for each type of fabric. You can also consult with a sewing expert or refer to online resources to ensure you choose the correct needle size.

ELNA Needle and thread combinations

Using the wrong thread or needle can cause the machine to break needles.

Reason: The wrong thread or needle can cause tension problems, which can lead to breakage.

Solution: Use the recommended thread and needle combinations for your ELNA sewing machine. The machine’s user manual will have a guide to help you choose the right thread and needle combinations.

Wrong ELNA sewing machine thread tension

The wrong thread tension can cause the machine to break needles.

Reason: If the thread tension is too tight or too loose, the needle may hit the bobbin case or the hook, which can cause it to break.

Solution: Adjust the thread tension according to the fabric you are working with. ELNA sewing machines come with a tension adjustment dial. You can refer to the user manual for instructions on how to adjust the tension correctly.

The wrong ELNA sewing machine presser foot is attached

Using the wrong presser foot can cause the machine to break needles.

Reason: The presser foot is designed to hold the fabric in place while the needle pierces it. Using the wrong foot can cause the fabric to move, which can lead to breakage.

Solution: Use the recommended presser foot for the type of fabric you are working with. ELNA sewing machines come with a guide that recommends the right presser foot for each type of fabric.

Here you can find all the 
parts and accessories for the ELNA Sewing Machines
guaranteed to fit your sewing machine

How to check the needle on an ELNA sewing machine

To check the needle on an ELNA sewing machine, follow these steps:

Turn off the machine and unplug it.

Raise the needle to its highest position by turning the handwheel towards you.
Remove the presser foot and the needle plate.
Remove the needle by loosening the needle clamp screw.

Inspect the needle for any damage or bending.
Roll the needle on a flat surface to check if it is straight.
Check the needle’s point to make sure it is not blunt or damaged.

If the needle is damaged or bent, replace it with a new one.

5 Other Common Causes of Needle Breakage on a ELNA Sewing Machine

Apart from the common problems discussed above, there are some other problems that can arise with the needle of an ELNA sewing machine, such as:

The needle is not inserted correctly: If the needle is not inserted correctly into the machine, it may cause the machine to break needles. Make sure to insert the needle with the flat side facing the back of the machine.

The needle is hitting the bobbin case or hook: If the needle is hitting the bobbin case or hook, it can cause it to break. This may happen if the needle is bent or if the machine’s timing is off.
The needle is not aligned with the center of the foot: If the needle is not aligned with the center of the foot, it can cause the machine to break needles. This may happen if the needle is not inserted correctly or if the foot is not attached properly.
The needle is not the right length: If the needle is too long or too short, it may cause the machine to break needles. Make sure to use the right length of needle for the machine and the fabric you are working with.

The needle is too loose or too tight: If the needle is too loose or too tight, it may cause the machine to break needles. Make sure to adjust the needle tension correctly according to the fabric you are working with.

Here you can find all the 
parts and accessories for the ELNA Sewing Machines
guaranteed to fit your sewing machine

If you are experiencing any of these issues, it is best to refer to the user manual or seek help from a sewing expert to diagnose and fix the problem.

Stitch Problems

FAQ

What type of needle should I use for my ELNA sewing machine?

ELNA sewing machines usually require universal needles, but the type of needle you use will depend on the type of fabric you are working with. Check your user manual for specific needle recommendations.

Can I use any brand of needle on my ELNA sewing machine?

Yes, you can use needles from different brands as long as they are the right type and size for your machine.

What size of needle should I use for heavy fabrics?

For heavy fabrics, you may need to use a larger size needle, such as a size 90/14 or 100/16.

Can I reuse needles on my ELNA sewing machine?

It is not recommended to reuse needles as they can become dull or damaged over time, which can cause thread breakage or damage to the machine.

How often should I change the needle on my ELNA sewing machine?

It is recommended to change the needle after every 8-10 hours of sewing, or if you notice any signs of damage or wear.

How do I know if my needle is dull or damaged?

You can check your needle by inspecting it for any bends or burrs, or by rolling it on a flat surface to check if it is straight.

What is the difference between a ballpoint needle and a universal needle?

A ballpoint needle has a rounded tip, which is ideal for knit fabrics, while a universal needle has a slightly pointed tip that can be used for a wide range of fabrics.

Can I use the same needle for sewing different fabrics on my ELNA sewing machine?

It is recommended to use a different needle for different fabrics, as the type and size of needle you use can affect the quality of your stitching.

How do I know if I am using the right needle for my fabric on my ELNA sewing machine?

You can check the user manual for specific needle recommendations based on the type of fabric you are working with.

Can the wrong needle cause damage to my ELNA sewing machine?

Yes, using the wrong needle can cause damage to your machine or affect the quality of your stitching. It is important to use the right type and size of needle for your machine and the fabric you are working with.

Conclusion. ELNA Sewing machine breaking needles

In conclusion, breaking needles on an ELNA sewing machine can be frustrating, but it is often caused by simple issues that can be easily fixed. By checking the needle, using the correct size and type of needle and thread, adjusting the tension, and using the right presser foot, you can avoid needle breakage and sew with ease. Remember to refer to the user manual and seek help from a sewing expert if you need further assistance.