Husqvarna Viking 6680 Common Problems and Troubleshooting
As proud owners of the Husqvarna Viking 6680 sewing machine, it’s essential to understand how to troubleshoot common issues that may arise during your sewing endeavors. This guide delves into various problems you might encounter with this specific model and provides tailored solutions to ensure smooth sewing experiences.
Causes of Common Problems with the Husqvarna Viking 6680
Thread Breaking
- Description: Thread breaking frequently during sewing with the Husqvarna Viking 6680.
Cause: Incorrect threading or tension settings, worn-out needle, or using low-quality thread.
Troubleshooting:- Re-thread the machine following the threading diagram in the user manual.
- Check and adjust the tension settings according to the fabric being used.
- Replace the needle with a new, appropriate size and type for the fabric.
- Use high-quality thread suitable for the selected fabric.
Bobbin Jamming
- Description: Bobbin getting stuck or jamming in the Husqvarna Viking 6680.
Cause: Incorrectly inserted bobbin, lint buildup in the bobbin area, or damaged bobbin case.
Troubleshooting:- Remove the bobbin and re-insert it properly, ensuring it rotates smoothly.
- Clean the bobbin area thoroughly to remove any lint or debris.
- Inspect the bobbin case for any damage and replace if necessary.
Uneven Stitching
- Description: Husqvarna Viking 6680 producing uneven or irregular stitches.
Cause: Improper tension settings, bent or blunt needle, or incorrect presser foot pressure.
Troubleshooting:- Check and adjust the tension settings according to the fabric and thread being used.
- Replace the needle with a new, straight needle of the correct size.
- Ensure the presser foot pressure is set correctly for the fabric thickness.
Machine Jamming
- Description: Husqvarna Viking 6680 getting jammed or stuck during sewing.
Cause: Fabric caught in the feed dogs, incorrect threading, or mechanical issues.
Troubleshooting:- Stop sewing immediately and remove the fabric from the machine.
- Re-thread the machine following the threading diagram in the user manual.
- Check for any visible obstructions or damage to the machine’s mechanical parts.
Machine Noise
- Description: Unusual or excessive noise coming from the Husqvarna Viking 6680 while sewing.
Cause: Loose parts, lack of lubrication, or mechanical issues.
Troubleshooting:- Tighten any loose screws or parts on the machine.
- Apply lubricant to the recommended areas as per the user manual.
- If the noise persists, contact a qualified technician for further inspection.
Needle Breakage
- Description: Needles frequently breaking while sewing with the Husqvarna Viking 6680.
Cause: Using the wrong needle size or type, sewing over pins, or mechanical issues.
Troubleshooting:- Ensure you are using the correct needle size and type for the fabric.
- Remove pins before sewing to prevent them from hitting the needle.
- Check the needle for any damage or bending and replace if necessary.
Thread Tension Issues
- Description: Inconsistent thread tension observed during sewing with the Husqvarna Viking 6680.
Cause: Improper threading, dirty tension discs, or mechanical problems.
Troubleshooting:- Re-thread the machine, ensuring the thread passes through all tension discs correctly.
- Clean the tension discs using a lint-free cloth or brush to remove any accumulated debris.
- If the issue persists, consult the user manual for adjusting the tension settings or seek professional assistance.
Stitch Skips
- Description: Husqvarna Viking 6680 skipping stitches intermittently during sewing.
Cause: Improper needle insertion, dull or damaged needle, or incorrect thread tension.
Troubleshooting:- Ensure the needle is inserted correctly with the flat side facing the back.
- Replace the needle with a new one if it is dull, bent, or damaged.
- Adjust the thread tension according to the fabric and thread being used.
Feed Dog Problems
- Description: Husqvarna Viking 6680 experiencing issues with the feed dogs not moving fabric properly.
Cause: Buildup of lint and debris, feed dog adjustment, or mechanical malfunction.
Troubleshooting:- Clean the feed dogs thoroughly to remove any accumulated lint or debris.
- Check the feed dog adjustment to ensure it is set correctly for the fabric being used.
- If the problem persists, contact customer support or a certified technician for further assistance.
Bobbin Winding Issues
- Description: Difficulties encountered while winding the bobbin on the Husqvarna Viking 6680.
Cause: Improper bobbin placement, tension disc issues, or mechanical faults.
Troubleshooting:- Ensure the bobbin is placed correctly on the winding spindle.
- Check and adjust the tension disc if necessary to ensure smooth bobbin winding.
- If problems persist, consult the user manual for troubleshooting steps or seek professional assistance.
Buttonhole Malfunction
- Description: Husqvarna Viking 6680 experiencing issues when creating buttonholes.
Cause: Incorrect buttonhole foot attachment, improper settings, or mechanical problems.
Troubleshooting:- Ensure the buttonhole foot is securely attached and compatible with the machine.
- Check and adjust the buttonhole settings according to the fabric and button size.
- If problems persist, inspect the machine for any mechanical issues or consult the user manual for troubleshooting guidance.
Thread Nesting
- Description: Husqvarna Viking 6680 producing tangled or nested threads on the underside of the fabric.
Cause: Incorrect threading, bobbin tension issues, or mechanical faults.
Troubleshooting:- Re-thread the machine, ensuring the thread is properly seated in the tension discs and bobbin case.
- Adjust the bobbin tension if necessary to achieve balanced stitch formation.
- If thread nesting continues, inspect the machine for any mechanical problems or seek professional assistance.
Needle Plate Damage
- Description: Damage observed on the needle plate of the Husqvarna Viking 6680.
Cause: Improper needle insertion, sewing over pins, or mechanical issues.
Troubleshooting:- Ensure needles are inserted correctly and securely tightened.
- Avoid sewing over pins to prevent damage to the needle plate.
- If damage is severe, replace the needle plate following manufacturer guidelines.
Foot Pedal Malfunction
- Description: Irregular response or non-functioning foot pedal on the Husqvarna Viking 6680.
Cause: Loose connections, faulty wiring, or internal circuitry issues.
Troubleshooting:- Check the connection between the foot pedal and the machine for any loose or damaged wires.
- If connections appear intact, test the foot pedal with another compatible machine to isolate the issue.
- If problems persist, contact customer support for assistance or consider replacing the foot pedal.
Thread Cutter Dysfunction
- Description: Husqvarna Viking 6680’s built-in thread cutter failing to cut the thread cleanly.
Cause: Dull or damaged thread cutter blade, debris buildup, or mechanical issues.
Troubleshooting:- Inspect the thread cutter blade for any signs of wear or damage and replace if necessary.
- Clean the thread cutter area to remove any lint or debris that may be obstructing the blade’s movement.
- If problems persist, consult the user manual for maintenance instructions or contact a certified technician for assistance.
Thread Tension Discrepancy
- Description: Husqvarna Viking 6680 exhibiting inconsistent thread tension between upper and lower threads.
Cause: Improper bobbin insertion, tension disk issues, or mechanical problems.
Troubleshooting:- Ensure the bobbin is inserted correctly into the bobbin case.
- Check and adjust the tension disks to ensure proper tension balance.
- If tension issues persist, inspect the machine for any mechanical faults or seek professional assistance.
Thread Snapping
- Description: Thread snapping or breaking frequently during sewing with the Husqvarna Viking 6680.
Cause: Incorrect threading, worn-out needle, or excessive tension.
Troubleshooting:- Re-thread the machine, ensuring the thread path follows the correct sequence as per the user manual.
- Replace the needle with a new, appropriate size and type for the fabric being sewn.
- Check and adjust the tension settings to ensure they are not too tight.
Presser Foot Pressure Problems
- Description: Husqvarna Viking 6680 experiencing issues with inconsistent presser foot pressure.
Cause: Loose presser foot attachment, incorrect pressure adjustment, or mechanical issues.
Troubleshooting:- Ensure the presser foot is securely attached to the machine.
- Adjust the presser foot pressure according to the fabric thickness and type.
- If problems persist, inspect the machine for any mechanical problems or consult the user manual for troubleshooting guidance.
Thread Jamming in Bobbin Case
- Description: Thread getting stuck or jammed in the bobbin case of the Husqvarna Viking 6680.
Cause: Incorrect bobbin insertion, lint buildup, or damaged bobbin case.
Troubleshooting:- Remove the bobbin and re-insert it properly into the bobbin case.
- Clean the bobbin case area to remove any accumulated lint or debris.
- If the problem persists, inspect the bobbin case for any damage and replace if necessary.
Thread Fraying
- Description: Thread fraying or unraveling while sewing with the Husqvarna Viking 6680.
Cause: Rough edges on the needle plate, incorrect needle size, or low-quality thread.
Troubleshooting:- Inspect the needle plate for any rough spots or burrs and smooth them out if necessary.
- Ensure you are using the correct needle size and type for the fabric being sewn.
- Use high-quality thread suitable for the selected fabric to prevent fraying.
Thread Looping
- Description: Husqvarna Viking 6680 forming loops on the underside of the fabric while sewing.
Cause: Incorrect bobbin tension, improperly wound bobbin, or debris in the bobbin case.
Troubleshooting:- Adjust the bobbin tension to ensure it matches the upper thread tension.
- Ensure the bobbin is correctly wound and inserted into the bobbin case.
- Clean the bobbin case area to remove any lint or debris that may be affecting thread tension.
Machine Freezing
- Description: Husqvarna Viking 6680 freezing or becoming unresponsive during sewing.
Cause: Overheating, software glitch, or mechanical malfunction.
Troubleshooting:- Allow the machine to cool down if it has been in use for an extended period.
- Check for any software updates available for the machine.
- If the problem persists, inspect the machine for any mechanical issues or contact customer support for assistance.
Bobbin Thread Showing on Top
- Description: Bobbin thread appearing on the top side of the fabric while sewing with the Husqvarna Viking 6680.
Cause: Incorrect upper thread tension, improperly threaded machine, or bobbin tension issues.
Troubleshooting:- Adjust the upper thread tension to achieve balanced stitch formation.
- Re-thread the machine, ensuring the thread path follows the correct sequence as per the user manual.
- Check and adjust the bobbin tension if necessary to match the upper thread tension.
Needle Bar Issues
- Description: Husqvarna Viking 6680 experiencing problems with the needle bar mechanism.
Cause: Misalignment, lack of lubrication, or mechanical wear.
Troubleshooting:- Inspect the needle bar for any signs of misalignment or damage and adjust or replace as needed.
- Apply lubricant to the needle bar mechanism according to the user manual’s instructions.
- If problems persist, consult a qualified technician for further diagnosis and repair.
Machine Skipping Stitches
- Description: Husqvarna Viking 6680 intermittently skipping stitches during sewing.
Cause: Improper needle insertion, dull or damaged needle, or timing issues.
Troubleshooting:- Ensure the needle is inserted correctly with the flat side facing the back.
- Replace the needle with a new one if it is dull, bent, or damaged.
- If skipping stitches persist, consult the user manual for instructions on checking and adjusting the machine’s timing.
Husqvarna Viking 6680 Sewing Machine Manual
The operating instructions manual for the Husqvarna Viking 6680 sewing machine can be found on the manufacturer’s website.
Husqvarna Viking 6680 Frequently Asked Questions
Q: Why does my thread keep breaking on the Husqvarna Viking 6680?
A: Thread breaking can occur due to incorrect threading, tension settings, or using low-quality thread. Ensure proper threading, adjust tension, and use high-quality thread for optimal results.
Q: How do I fix bobbin jamming issues with the Husqvarna Viking 6680?
A: Bobbin jamming may result from incorrect insertion, lint buildup, or a damaged bobbin case. Re-insert the bobbin, clean the bobbin area, and inspect the bobbin case for damage.
Q: What should I do if my stitches are uneven on the Husqvarna Viking 6680?
A: Uneven stitches can be caused by improper tension settings, needle issues, or incorrect presser foot pressure. Adjust tension, replace the needle, and ensure proper presser foot pressure for even stitches.
Q: How can I prevent my Husqvarna Viking 6680 from jamming?
A: Prevent jamming by avoiding sewing over pins, ensuring proper threading, and regular machine maintenance. Stop sewing immediately if a jam occurs and clear any fabric or thread from the machine.
Q: What should I do if my Husqvarna Viking 6680 is making unusual noises?
A: Unusual noises may indicate loose parts, lack of lubrication, or mechanical issues. Tighten loose screws, lubricate moving parts, and seek professional assistance if the noise persists.
Conclusion
Always refer to the manual, customer service, or service center whenever possible if there is a problem with your Husqvarna Viking 6680 sewing machine. Proper maintenance and timely troubleshooting can help ensure optimal performance and longevity of your machine.
Husqvarna Viking 6020 Common Problems