Husqvarna Viking Husky 145 Common Problems and Troubleshooting
Welcome to our guide on troubleshooting common issues with the Husqvarna Viking Husky 145 sewing machine. As a proud owner of this model, you understand the importance of smooth sewing operations. However, like any mechanical device, your sewing machine may encounter occasional hiccups. In this comprehensive guide, we will address common problems that users may encounter while operating the Husqvarna Viking Husky 145, along with troubleshooting steps to resolve them efficiently. Whether you’re experiencing issues with the machine’s electrical components, stitches, or other functionalities, we’ve got you covered.
Common Problems with the Husqvarna Viking Husky 145
-
Bobbin Thread Jamming
Description: The bobbin thread gets jammed or tangled during sewing.
Cause: Incorrectly inserted or wound bobbin, or debris in the bobbin area.
Troubleshooting:
- Turn off the machine and unplug it for safety.
- Remove the bobbin case and clean out any lint or debris.
- Rewind the bobbin following the machine’s instructions, ensuring even tension.
- Reinsert the bobbin correctly into the bobbin case.
- Resume sewing at a slow speed to ensure proper operation.
-
Needle Breakage
Description: Needles frequently break during sewing.
Cause: Using incorrect needle size or type, or bent or damaged needle.
Troubleshooting:
- Check if the needle is bent or damaged and replace it if necessary.
- Ensure you are using the correct needle type and size for the fabric being sewn.
- Inspect the needle plate and feed dogs for any burrs or damage that may be causing the needle to break.
- Adjust the thread tension to ensure it is not too tight, causing excessive stress on the needle.
- Slow down the sewing speed to reduce the likelihood of needle breakage.
-
Uneven Stitching
Description: Stitches are uneven in length or tension.
Cause: Improper threading, incorrect tension settings, or dull needle.
Troubleshooting:
- Check the threading of both the top thread and bobbin thread, ensuring they are correctly threaded.
- Adjust the tension settings according to the fabric being sewn and the desired stitch quality.
- Replace the needle with a new one if it is dull or damaged.
- Test sew on a scrap piece of fabric to fine-tune tension settings before resuming your project.
- Regularly clean and maintain your machine to prevent buildup of lint or debris that can affect stitch quality.
-
Noisy Operation
Description: The sewing machine produces excessive noise during operation.
Cause: Loose or worn-out machine parts, lack of lubrication, or incorrect machine setup.
Troubleshooting:
- Check all screws and bolts on the machine to ensure they are tightened securely.
- Apply sewing machine oil to lubricate moving parts according to the manufacturer’s recommendations.
- Ensure the machine is set up on a stable surface to minimize vibrations.
- Inspect the needle and presser foot to ensure they are properly installed and not causing unnecessary noise.
- If the noise persists, consult the machine’s user manual for further troubleshooting steps or contact a professional technician.
-
Thread Tension Issues
Description: The thread tension is inconsistent or difficult to adjust.
Cause: Improper threading, damaged tension discs, or incorrect tension settings.
Troubleshooting:
- Check the threading of both the top thread and bobbin thread, ensuring they are correctly inserted and tensioned.
- Inspect the tension discs for any damage or debris that may be affecting their function.
- Adjust the tension settings gradually, testing with scrap fabric until the desired tension is achieved.
- Clean the tension discs and surrounding area regularly to prevent buildup of lint or debris.
- If the tension issues persist, consider seeking assistance from a professional technician to inspect and repair the machine.
Thread Bunching Underneath
Description: Threads are bunching up underneath the fabric during sewing.
Cause: Incorrect bobbin tension, improperly inserted bobbin, or lint buildup in the bobbin area.
Troubleshooting:
- Check the bobbin tension by adjusting the tension screw on the bobbin case.
- Ensure the bobbin is inserted correctly into the bobbin case, with the thread feeding in the correct direction.
- Clean out any lint or debris in the bobbin area using a brush or compressed air.
- Test sew on scrap fabric to check if the issue persists after making adjustments.
- If the problem continues, consider replacing the bobbin case or seeking professional assistance.
Machine Skipping Stitches
Description: The sewing machine occasionally skips stitches while sewing.
Cause: Dull or bent needle, improper needle/thread combination, or timing issues.
Troubleshooting:
- Inspect the needle for any signs of damage or wear, and replace it if necessary.
- Ensure you are using the correct needle size and type for the fabric being sewn.
- Check the threading of both the top thread and bobbin thread, ensuring they are correctly threaded and tensioned.
- If the issue persists, consult the machine’s user manual for instructions on checking and adjusting the machine’s timing.
- Consider seeking assistance from a professional technician if the problem persists after troubleshooting.
Foot Pedal Malfunction
Description: The foot pedal does not respond or operates intermittently.
Cause: Loose connection, damaged foot pedal, or electrical issues.
Troubleshooting:
- Check the connection between the foot pedal and the sewing machine to ensure it is securely plugged in.
- Inspect the foot pedal for any visible damage or signs of wear, such as frayed wires.
- Test the foot pedal on a different outlet or machine to rule out electrical issues.
- If the problem persists, contact the manufacturer for assistance in repairing or replacing the foot pedal.
- Avoid using the machine until the foot pedal issue is resolved to prevent accidents or damage to the machine.
Feed Dog Jamming
Description: The feed dogs are not moving or are jammed, causing fabric to not feed through properly.
Cause: Dirt or debris obstructing the feed dogs, worn-out feed dog mechanism, or improper machine maintenance.
Troubleshooting:
- Turn off the machine and unplug it for safety.
- Clean the feed dog area thoroughly with a brush to remove any lint or debris.
- Apply sewing machine oil to lubricate the feed dog mechanism, following the manufacturer’s instructions.
- Manually move the feed dogs to ensure they are not stuck or obstructed.
- If the issue persists, consult the machine’s user manual for further troubleshooting steps or contact a professional technician.
Inconsistent Bobbin Winding
Description: The bobbin winding process produces uneven or loose winding.
Cause: Incorrect threading of the bobbin winding mechanism, worn-out bobbin winding mechanism, or improper tension settings.
Troubleshooting:
- Review the machine’s user manual for proper threading instructions for the bobbin winding mechanism.
- Ensure the tension disc for bobbin winding is set correctly according to the thread being used.
- Clean the bobbin winding area to remove any lint or debris that may be affecting the winding process.
- If the issue persists, consider adjusting the tension settings or seeking assistance from a professional technician.
- Test the bobbin winding process on scrap fabric to ensure even and consistent winding before resuming sewing projects.
Thread Cutter Not Working
Description: The built-in thread cutter on the sewing machine is not functioning properly.
Cause: Dull or damaged blade, obstruction in the thread cutter mechanism, or misalignment.
Troubleshooting:
- Inspect the blade of the thread cutter for any signs of dullness or damage, and replace if necessary.
- Clean the thread cutter area to remove any lint or debris that may be obstructing the mechanism.
- Manually move the thread cutter mechanism to check for smooth operation and proper alignment.
- If the issue persists, consult the machine’s user manual for instructions on adjusting or repairing the thread cutter.
- Avoid using the thread cutter until the issue is resolved to prevent further damage to the machine or injury.
Bobbin Case Loosening
Description: The bobbin case becomes loose during sewing, affecting stitch quality.
Cause: Improper insertion of the bobbin case, loose screws holding the bobbin case in place, or worn-out bobbin case latch.
Troubleshooting:
- Turn off the machine and unplug it for safety.
- Check the bobbin case to ensure it is inserted correctly and securely in place.
- Tighten any screws holding the bobbin case in place, if applicable.
- Inspect the latch of the bobbin case for signs of wear or damage, and replace if necessary.
- Test sew on scrap fabric to ensure the bobbin case remains secure during operation.
Thread Knotting at the Beginning of a Seam
Description: Threads are knotting or tangling at the beginning of a seam, leading to uneven stitching.
Cause: Incorrect threading of the machine, improper bobbin tension, or sewing too close to the fabric edge.
Troubleshooting:
- Re-thread the machine, ensuring both the top thread and bobbin thread are correctly threaded.
- Check the tension of the bobbin thread and adjust if necessary to achieve balanced tension with the top thread.
- Start sewing slightly away from the fabric edge to prevent the threads from knotting or tangling.
- Trim excess thread tails before starting a new seam to reduce the likelihood of thread tangling.
- If the issue persists, consider using a stabilizer or interfacing to reinforce the fabric edges before sewing.
Machine Overheating
Description: The sewing machine becomes excessively hot during extended use.
Cause: Overuse without breaks, inadequate ventilation, or mechanical issues.
Troubleshooting:
- Turn off the machine and unplug it immediately if it feels excessively hot to the touch.
- Allow the machine to cool down completely before resuming use.
- Ensure the machine is placed in a well-ventilated area to prevent overheating.
- Limit continuous sewing sessions and take regular breaks to allow the machine to cool down.
- If the machine continues to overheat, consult a professional technician to inspect for mechanical issues.
Buttonhole Malfunction
Description: The sewing machine fails to create consistent or properly sized buttonholes.
Cause: Incorrect buttonhole setting, dull or damaged needle, or improper fabric handling.
Troubleshooting:
- Review the machine’s user manual for instructions on setting up and sewing buttonholes.
- Ensure the needle used for creating buttonholes is sharp and in good condition.
- Test sew on scrap fabric to adjust buttonhole settings for proper size and density.
- Support the fabric properly during buttonhole sewing to prevent shifting or distortion.
- If the issue persists, consider using a specialized buttonhole foot or seeking assistance from a professional technician.
Thread Fraying or Breaking
Description: The sewing machine thread consistently frays or breaks during sewing.
Cause: Incorrect threading, rough edges on the needle plate, or tension issues.
Troubleshooting:
- Re-thread the machine, ensuring the thread is passing through all thread guides and tension discs properly.
- Inspect the needle plate for any rough spots or burrs that may be causing the thread to fray or break, and smooth them if necessary.
- Check the tension settings for both the top thread and bobbin thread, adjusting as needed for balanced tension.
- Use high-quality thread appropriate for the fabric being sewn, and consider using a thread conditioner to reduce friction.
- If the issue persists, try using a different needle type or size, and consult the machine’s user manual for additional troubleshooting steps.
Machine Not Powering On
Description: The sewing machine does not respond when attempting to power it on.
Cause: Loose power cord connection, blown fuse, or electrical issues.
Troubleshooting:
- Check that the power cord is securely plugged into both the sewing machine and the power outlet.
- Inspect the power cord for any signs of damage or fraying, and replace if necessary.
- Verify that the power outlet is working by testing it with another device.
- Check the fuse in the machine’s power cord or plug, and replace if blown.
- If the machine still does not power on, consult the manufacturer’s troubleshooting guide or contact customer support for assistance.
Uneven Feed
Description: The fabric is not feeding evenly through the machine during sewing.
Cause: Dirty or damaged feed dogs, improper presser foot pressure, or fabric handling issues.
Troubleshooting:
- Turn off the machine and unplug it for safety.
- Clean the feed dogs thoroughly to remove any lint or debris that may be obstructing their movement.
- Adjust the presser foot pressure according to the thickness of the fabric being sewn.
- Guide the fabric evenly through the machine, avoiding pulling or stretching it excessively.
- If the issue persists, consider using a walking foot attachment or seeking assistance from a professional technician.
Thread Looping on the Bottom
Description: The sewing machine creates loops of thread on the underside of the fabric.
Cause: Incorrect bobbin tension, improperly wound bobbin, or threading issues.
Troubleshooting:
- Check the bobbin tension by adjusting the tension screw on the bobbin case.
- Ensure the bobbin is wound evenly and inserted correctly into the bobbin case.
- Re-thread the machine, ensuring the thread is correctly passing through all thread guides and tension discs.
- Test sew on scrap fabric to adjust the tension settings for balanced stitches.
- If the problem persists, consider cleaning the bobbin case and surrounding area to remove any lint or debris that may be affecting the tension.
Machine Freezing or Locking Up
Description: The sewing machine freezes or locks up during operation, preventing further sewing.
Cause: Mechanical obstruction, software glitch, or overloaded motor.
Troubleshooting:
- Turn off the machine and unplug it for safety.
- Check for any visible obstructions in the needle or bobbin area, and remove them if present.
- Wait a few minutes to allow the machine to cool down, especially if it has been running for an extended period.
- If the issue persists, consult the machine’s user manual for instructions on resetting or troubleshooting software issues.
- If none of the above steps resolve the problem, contact a professional technician for further diagnosis and repair.
Thread Tangling in Bobbin Area
Description: The thread becomes tangled in the bobbin area, causing sewing disruptions.
Cause: Improper threading, bobbin tension issues, or debris accumulation in the bobbin case.
Troubleshooting:
- Turn off the machine and unplug it for safety.
- Remove the bobbin case and clean out any lint or debris from the bobbin area.
- Re-thread the machine, ensuring the thread is properly inserted and tensioned.
- Adjust the bobbin tension if necessary to achieve balanced tension with the top thread.
- Test sew on scrap fabric to ensure the issue has been resolved before continuing with your project.
Stitch Length Variation
Description: The sewing machine produces stitches of varying lengths during sewing.
Cause: Incorrect stitch length setting, mechanical issues with the stitch length regulator, or inconsistent machine speed.
Troubleshooting:
- Check the stitch length setting on the machine and adjust it to the desired length.
- Inspect the stitch length regulator mechanism for any signs of damage or obstruction, and repair if necessary.
- Ensure consistent machine speed while sewing to prevent variations in stitch length.
- If the issue persists, consult the machine’s user manual for instructions on adjusting or repairing the stitch length regulator.
- Test sew on scrap fabric to ensure the stitch length remains consistent before continuing with your project.
Thread Spool Slippage
Description: The thread spool slips or falls off the machine during sewing.
Cause: Loose thread spool holder, improperly sized spool, or inadequate tension on the thread.
Troubleshooting:
- Ensure the thread spool holder is securely tightened onto the machine.
- Use thread spool caps or adapters to fit smaller thread spools onto the machine’s spool holder securely.
- Adjust the tension on the thread to prevent excessive unwinding and slippage.
- If using a horizontal spool pin, ensure the spool rotates freely without any obstruction.
- Consider using a thread stand or auxiliary thread holder for larger or irregularly shaped thread spools.
Thread Knots on Fabric Surface
Description: Knots of thread appear on the surface of the fabric, affecting stitch quality.
Cause: Improper tension settings, thread catching on rough edges, or bobbin winding issues.
Troubleshooting:
- Check the tension settings for both the top thread and bobbin thread, adjusting as needed for balanced tension.
- Inspect the fabric and needle plate for any rough edges or burrs that may be catching the thread, and smooth them if necessary.
- Ensure the bobbin is wound evenly and inserted correctly into the bobbin case.
- Test sew on scrap fabric to adjust tension settings and verify that the issue has been resolved.
- If the problem persists, consider using a different type or weight of thread, or consult a professional technician for further assistance.
Uneven Thread Tension
Description: The tension between the top thread and bobbin thread is inconsistent, resulting in uneven stitches.
Cause: Improper threading, damaged tension discs, or incorrect tension settings.
Troubleshooting:
- Re-thread the machine, ensuring both the top thread and bobbin thread are correctly threaded.
- Inspect the tension discs for any signs of damage or debris that may be affecting their function.
- Adjust the tension settings gradually, testing with scrap fabric until the desired tension is achieved.
- Clean the tension discs and surrounding area regularly to prevent buildup of lint or debris.
- If the tension issues persist, consider seeking assistance from a professional technician to inspect and repair the machine.
Husqvarna Viking Husky 145 Sewing Machine Manual
The operating instructions for the Husqvarna Viking Husky 145 sewing machine can be found on the manufacturer’s website. Please visit the official Husqvarna Viking website to access the manual and detailed operating instructions for your machine.
Husqvarna Viking Husky 145 Frequently Asked Questions
Q: How do I troubleshoot bobbin thread jamming?
A: To troubleshoot bobbin thread jamming, first, turn off the machine and unplug it for safety. Remove the bobbin case and clean out any lint or debris from the bobbin area. Rewind the bobbin following the machine’s instructions, ensuring even tension. Reinsert the bobbin correctly into the bobbin case and resume sewing at a slow speed to ensure proper operation.
Q: What should I do if my needle keeps breaking?
A: If your needle keeps breaking, check if the needle is bent or damaged and replace it if necessary. Ensure you are using the correct needle type and size for the fabric being sewn. Inspect the needle plate and feed dogs for any burrs or damage that may be causing the needle to break. Adjust the thread tension to ensure it is not too tight, causing excessive stress on the needle. Finally, slow down the sewing speed to reduce the likelihood of needle breakage.
Q: How can I fix uneven stitching?
A: To fix uneven stitching, check the threading of both the top thread and bobbin thread, ensuring they are correctly threaded. Adjust the tension settings according to the fabric being sewn and the desired stitch quality. Replace the needle with a new one if it is dull or damaged. Test sew on a scrap piece of fabric to fine-tune tension settings before resuming your project. Regularly clean and maintain your machine to prevent buildup of lint or debris that can affect stitch quality.
Q: Why is my machine making excessive noise?
A: If your machine is making excessive noise, check all screws and bolts on the machine to ensure they are tightened securely. Apply sewing machine oil to lubricate moving parts according to the manufacturer’s recommendations. Ensure the machine is set up on a stable surface to minimize vibrations. Inspect the needle and presser foot to ensure they are properly installed and not causing unnecessary noise. If the noise persists, consult the machine’s user manual for further troubleshooting steps or contact a professional technician.
Q: How do I resolve thread tension issues?
A: To resolve thread tension issues, check the threading of both the top thread and bobbin thread, ensuring they are correctly inserted and tensioned. Inspect the tension discs for any damage or debris that may be affecting their function. Adjust the tension settings gradually, testing with scrap fabric until the desired tension is achieved. Clean the tension discs and surrounding area regularly to prevent buildup of lint or debris. If the tension issues persist, consider seeking assistance from a professional technician to inspect and repair the machine.
Conclusion
For any issues with your Husqvarna Viking Husky 145 sewing machine, always refer to the manual, customer service, or service center whenever possible. They can provide valuable assistance and guidance to ensure your machine operates smoothly and efficiently.
Husqvarna Viking H|Class 200s SERGER Common Problems