Husqvarna Viking Tribute 140C Common Problems and Troubleshooting
Welcome to our guide on addressing common issues with the Husqvarna Viking Tribute 140C sewing machine. As a proud owner of this innovative model, you might encounter occasional challenges during your sewing journey.
In this article, we’ll explore various problems you may face and provide troubleshooting tips to ensure smooth and uninterrupted sewing experiences.
Here you can find all the parts and accessories for the Husqvarna Viking Tribute 140C guaranteed to fit your sewing machine
Causes of Common Problems with the Husqvarna Viking Tribute 140C
1. Bobbin Jamming –
Description of the problem: The bobbin gets jammed, causing the sewing machine to stop working.
Cause of the problem: Incorrectly inserted or tangled bobbin thread.
Troubleshooting step-by-step:
- Turn off the sewing machine and remove the needle plate.
- Carefully remove the bobbin case and check for any tangled threads.
- Re-thread the bobbin following the machine’s manual instructions.
- Replace the bobbin case and needle plate, then test the machine.
- If the problem persists, consider cleaning the bobbin area or seeking professional assistance.
2. Thread Breaking –
Description of the problem: The thread keeps breaking while sewing.
Cause of the problem: Tension issues or using low-quality thread.
Troubleshooting step-by-step:
- Check the tension settings on both the upper thread and bobbin.
- Ensure you’re using high-quality sewing thread suitable for your fabric.
- Re-thread the machine, making sure the thread passes through all guides properly.
- Adjust the tension gradually and test on a scrap fabric until the issue is resolved.
- If the problem persists, consider changing the needle or seeking professional help.
3. Uneven Stitching –
Description of the problem: The stitches appear uneven or irregular.
Cause of the problem: Incorrect needle or presser foot, or improper threading.
Troubleshooting step-by-step:
- Check if the needle is bent, dull, or incorrectly installed.
- Ensure the correct presser foot is selected for the chosen stitch.
- Re-thread the machine, following the threading diagram in the manual.
- Adjust the stitch length and tension settings as needed.
- If the issue persists, try a different needle size or seek professional assistance.
4. Machine Freezing –
Description of the problem: The sewing machine freezes or stops responding.
Cause of the problem: Software glitch or overheating.
Troubleshooting step-by-step:
- Turn off the sewing machine and unplug it from the power source.
- Allow the machine to cool down for at least 15 minutes.
- Check for any tangled threads or obstructions in the bobbin area.
- Plug the machine back in and restart it.
- If the problem persists, consider updating the machine’s software or seeking professional assistance.
5. Needle Breakage –
Description of the problem: The needle frequently breaks while sewing.
Cause of the problem: Using the wrong needle size or bent needle.
Troubleshooting step-by-step:
- Ensure you’re using the correct needle size and type for your fabric.
- Inspect the needle for any bends or damage.
- Replace the needle with a new one if necessary.
- Check the presser foot and needle plate for any signs of damage.
- If the issue persists, adjust the tension settings or seek professional assistance.
6. Thread Bunching Underneath –
Description of the problem: The thread bunches up underneath the fabric, creating loops or knots.
Cause of the problem: Incorrect threading of the bobbin or tension issues.
Troubleshooting step-by-step:
- Remove the fabric and examine the bobbin area for any tangled threads.
- Re-thread the bobbin following the machine’s manual instructions.
- Check the tension settings for both the upper thread and bobbin.
- Adjust the tension gradually and test on scrap fabric until the issue is resolved.
- If the problem persists, clean the bobbin area or consult a professional.
7. Fabric Not Feeding Properly –
Description of the problem: The fabric doesn’t move smoothly while sewing, causing uneven stitches.
Cause of the problem: Incorrect presser foot pressure or feed dog malfunction.
Troubleshooting step-by-step:
- Check if the presser foot pressure is set correctly for your fabric thickness.
- Ensure the feed dogs are clean and free from any debris.
- Inspect the feed dog mechanism for any signs of damage or wear.
- Adjust the presser foot pressure and test on scrap fabric.
- If the issue persists, consider lubricating or replacing the feed dog mechanism.
8. Machine Making Strange Noise –
Description of the problem: The sewing machine emits unusual or loud noises during operation.
Cause of the problem: Loose parts, damaged components, or lack of lubrication.
Troubleshooting step-by-step:
- Turn off the machine and unplug it from the power source.
- Inspect the machine for any loose screws, nuts, or bolts.
- Check the bobbin area and needle plate for any foreign objects.
- Apply lubricating oil to the moving parts as per the manufacturer’s instructions.
- If the noise persists, consult a professional for further diagnosis and repair.
9. Needle Threader Not Working –
Description of the problem: The automatic needle threader fails to work properly.
Cause of the problem: Misalignment or damage to the needle threader mechanism.
Troubleshooting step-by-step:
- Ensure the needle is in the correct position for the needle threader to engage.
- Check for any debris or lint obstructing the needle threader mechanism.
- Try manually threading the needle to confirm if the needle is properly aligned.
- If the issue persists, consider adjusting or replacing the needle threader mechanism.
- Consult the machine’s manual or contact customer support for further assistance.
10. Stitch Selection Not Working –
Description of the problem: The sewing machine fails to select or change stitches as intended.
Cause of the problem: Software glitch, control panel malfunction, or user error.
Troubleshooting step-by-step:
- Turn off the machine and restart it to reset the control panel.
- Ensure the machine is properly plugged in and the power source is stable.
- Try selecting different stitches to see if the issue persists across all options.
- Check the control panel buttons for any signs of damage or debris.
- If the problem continues, consider updating the machine’s software or contacting technical support.
11. Bobbin Winding Malfunction –
Description of the problem: The bobbin winding mechanism fails to wind the thread properly onto the bobbin.
Cause of the problem: Improper placement of the bobbin or malfunctioning bobbin winding mechanism.
Troubleshooting step-by-step:
- Ensure the bobbin is placed correctly on the bobbin winding spindle.
- Check for any obstructions or debris in the bobbin winding area.
- Make sure the bobbin winding tension is properly adjusted.
- If the problem persists, inspect the bobbin winding mechanism for any signs of damage or wear.
- Contact customer support for further assistance if necessary.
12. Thread Tension Inconsistency –
Description of the problem: The thread tension fluctuates during sewing, resulting in uneven stitches.
Cause of the problem: Improper threading, damaged tension discs, or worn tension springs.
Troubleshooting step-by-step:
- Re-thread the upper thread, ensuring it passes through all tension discs correctly.
- Clean the tension discs and check for any signs of damage or wear.
- Inspect the tension spring for proper alignment and tension adjustment.
- Test the machine on scrap fabric while adjusting the tension settings gradually.
- If the problem persists, consider replacing damaged parts or seeking professional assistance.
13. Needle hitting the Bobbin Case –
Description of the problem: The needle strikes the bobbin case, causing damage and sewing issues.
Cause of the problem: Misalignment of the needle or bobbin case, bent needle, or incorrect needle size.
Troubleshooting step-by-step:
- Turn off the machine and remove the needle plate to access the bobbin area.
- Inspect the needle for any signs of bending or damage.
- Check the alignment of the needle and bobbin case.
- Ensure you’re using the correct needle size and type for your fabric.
- If the problem persists, adjust the needle position or seek professional assistance.
14. Automatic Thread Cutter Malfunction –
Description of the problem: The automatic thread cutter feature fails to cut the thread after sewing.
Cause of the problem: Blunt or misaligned thread cutter blade, software glitch, or mechanical issue.
Troubleshooting step-by-step:
- Inspect the thread cutter blade for any signs of dullness or misalignment.
- Clean the thread cutter area to remove any debris or lint buildup.
- Restart the machine and test the automatic thread cutter function.
- If the issue persists, consider updating the machine’s software or contacting customer support.
- If necessary, consult a technician for further inspection and repair.
15. Bobbin Thread Not Catching –
Description of the problem: The needle fails to catch the bobbin thread, preventing proper stitching.
Cause of the problem: Incorrect bobbin placement, bobbin tension issues, or needle and bobbin mismatch.
Troubleshooting step-by-step:
- Ensure the bobbin is correctly inserted into the bobbin case with the thread wound in the correct direction.
- Check the bobbin tension and adjust it if necessary.
- Re-thread the upper thread and make sure it passes through the needle’s eye correctly.
- Try using a new needle and re-thread the machine before testing again.
- If the problem persists, consult the machine’s manual or seek professional assistance.
Here you can find all the parts and accessories for the Husqvarna Viking Tribute 140C guaranteed to fit your sewing machine
16. Feed Dogs Not Moving –
Description of the problem: The feed dogs, which help move the fabric during sewing, remain stationary.
Cause of the problem: Debris or thread buildup obstructing the feed dog mechanism, damaged feed dogs, or mechanical issues.
Troubleshooting step-by-step:
- Turn off the sewing machine and remove the needle plate.
- Inspect the feed dog area for any debris, lint, or thread buildup.
- Clean the feed dog mechanism using a soft brush or compressed air.
- Manually move the feed dogs to ensure they’re not stuck or damaged.
- If the issue persists, consult the machine’s manual or seek professional repair.
17. Fabric Puckering –
Description of the problem: The fabric puckers or gathers excessively while sewing.
Cause of the problem: Incorrect tension settings, using the wrong needle or thread, or sewing too quickly.
Troubleshooting step-by-step:
- Check the tension settings for both the upper thread and bobbin.
- Ensure you’re using the appropriate needle size and type for the fabric.
- Test sew on a scrap fabric to adjust the tension and stitch length as needed.
- Slow down the sewing speed and avoid pulling the fabric while sewing.
- If the problem persists, consider changing the needle or thread type or seeking professional advice.
18. Needle Thread Keeps Breaking –
Description of the problem: The needle thread breaks repeatedly during sewing.
Cause of the problem: Tension issues, using old or low-quality thread, or a damaged needle.
Troubleshooting step-by-step:
- Check the tension settings for both the upper thread and bobbin.
- Replace the needle with a new one, ensuring it’s suitable for the fabric.
- Use high-quality thread and ensure it’s properly wound onto the bobbin.
- Re-thread the machine, following the threading diagram in the manual.
- If the issue persists, consult the machine’s manual or seek professional assistance.
19. Stitches Skipping –
Description of the problem: The sewing machine skips stitches, leaving gaps in the fabric.
Cause of the problem: Incorrect needle size or type, dull or damaged needle, or improper threading.
Troubleshooting step-by-step:
- Check the needle size and type to ensure it’s suitable for the fabric.
- Replace the needle with a new one if it’s dull or damaged.
- Re-thread the machine, ensuring the thread passes through all guides correctly.
- Check the tension settings and adjust them if necessary.
- If the problem persists, consult the machine’s manual or seek professional assistance.
20. Bobbin Thread Keeps Breaking –
Description of the problem: The bobbin thread breaks frequently during sewing.
Cause of the problem: Tension issues, bobbin winding problems, or using old or low-quality bobbin thread.
Troubleshooting step-by-step:
- Check the tension settings for both the upper thread and bobbin.
- Ensure the bobbin is wound properly and inserted correctly into the bobbin case.
- Use high-quality bobbin thread suitable for your machine.
- Re-thread the bobbin, following the machine’s manual instructions.
- If the issue persists, clean the bobbin area or consult a professional.
21. Fabric Jamming Underneath the Needle Plate –
Description of the problem: The fabric gets stuck or jammed underneath the needle plate while sewing.
Cause of the problem: Accumulation of lint or debris, incorrect threading, or damaged needle plate.
Troubleshooting step-by-step:
- Turn off the sewing machine and unplug it from the power source.
- Remove the needle plate to access the feed dog and bobbin area.
- Inspect for any lint, thread, or debris causing the jam.
- Clean the area thoroughly using a soft brush or compressed air.
- Check the needle plate for any signs of damage and replace if necessary.
22. Inconsistent Bobbin Tension –
Description of the problem: The tension of the bobbin thread varies, resulting in irregular stitches.
Cause of the problem: Improper bobbin winding, damaged bobbin case, or tension spring issues.
Troubleshooting step-by-step:
- Ensure the bobbin is wound evenly and inserted correctly into the bobbin case.
- Check the bobbin case for any signs of damage or wear.
- Inspect the tension spring for proper alignment and tension adjustment.
- Adjust the bobbin tension screw if necessary, following the machine’s manual.
- If the problem persists, consider replacing the bobbin case or seeking professional assistance.
23. Thread Looping on the Surface –
Description of the problem: The upper thread forms loops on the fabric surface instead of forming stitches.
Cause of the problem: Incorrect threading, tension issues, or damaged needle.
Troubleshooting step-by-step:
- Re-thread the upper thread, ensuring it passes through all guides correctly.
- Check the tension settings for both the upper thread and bobbin.
- Test sew on scrap fabric while adjusting the tension gradually.
- Inspect the needle for any signs of damage or dullness and replace if necessary.
- If the issue persists, consult the machine’s manual or seek professional assistance.
24. Foot Pedal Malfunction –
Description of the problem: The foot pedal fails to respond or becomes unresponsive during sewing.
Cause of the problem: Loose connection, damaged pedal cord, or internal electrical issues.
Troubleshooting step-by-step:
- Check the connection between the foot pedal and the sewing machine.
- Inspect the pedal cord for any signs of damage or wear.
- Ensure the pedal is positioned correctly and not obstructed.
- Test the pedal on a different power outlet or sewing machine (if available).
- If the problem persists, contact customer support for further assistance.
25. Stitch Length Inconsistency –
Description of the problem: The stitch length varies unexpectedly while sewing.
Cause of the problem: Mechanical issues, improper adjustment, or software glitch.
Troubleshooting step-by-step:
- Check the stitch length settings on the machine and adjust if necessary.
- Ensure the machine is properly lubricated and maintained.
- Test sew on scrap fabric while monitoring the stitch length.
- Reset the machine to its default settings and try again.
- If the issue persists, consult the machine’s manual or seek professional assistance.
Here you can find all the parts and accessories for the Husqvarna Viking Tribute 140C guaranteed to fit your sewing machine
Husqvarna Viking Tribute 140C Sewing Machine Manual
The operating instructions for the Husqvarna Viking Tribute 140C sewing machine can be found on the manufacturer’s website.
Husqvarna Viking Tribute 140C Frequently Asked Questions
1. How can I adjust the tension on my Husqvarna Viking Tribute 140C?
To adjust the tension on your sewing machine, refer to the manual for specific instructions. Typically, tension adjustments can be made using the tension dial or knobs located on the machine’s front panel.
2. What should I do if my Husqvarna Viking Tribute 140C keeps jamming?
If your sewing machine keeps jamming, first, ensure that you’re using the correct needle and thread for your fabric. Next, check for any tangled threads or debris in the bobbin area. Clean the machine thoroughly and re-thread it according to the manual’s instructions.
3. How do I clean and maintain my Husqvarna Viking Tribute 140C?
To clean and maintain your sewing machine, regularly remove lint and debris from the bobbin area, feed dogs, and needle plate. Oil the machine’s moving parts as recommended in the manual, and avoid exposing it to dust and humidity when not in use.
4. Can I use different types of needles with my Husqvarna Viking Tribute 140C?
Yes, you can use various types and sizes of needles with your sewing machine, depending on the fabric and project you’re working on. Refer to the manual for recommendations on needle types and sizes for different fabrics.
5. How often should I have my Husqvarna Viking Tribute 140C serviced?
It’s recommended to have your sewing machine serviced annually or as needed, especially if you notice any unusual noises, stitching irregularities, or performance issues. Regular maintenance will help keep your machine in optimal condition.
Conclusion
For any issues with your Husqvarna Viking Tribute 140C sewing machine, always refer to the manual, customer service, or service center for assistance. Proper maintenance and following the manufacturer’s guidelines will ensure the longevity and performance of your machine.
Husqvarna Viking Scandinavia 100 Common Problems
