Baby Lock Aerial Common Problems and Troubleshooting
The Baby Lock Aerial sewing machine is a popular model known for its versatility and performance. However, like any sewing machine, it may encounter some common problems during use. In this article, we will explore these common issues and provide troubleshooting steps to help you resolve them.
List of 11 Common Problems in the Baby Lock Aerial
- Bobbin holder problems
- Bobbin winding problems – Bobbin winder not spinning
- Sewing machine tension problems
- Breaking needles
- Keep jamming
- Fabric movement problems
- Upper thread breaking
- Bobbin thread problems
- Bobbin tension problems
- Stitch problems
- Sewing machine parts issues
Causes of Problems on the Baby Lock Aerial and Troubleshooting
In this section, we will discuss the common causes behind the problems listed above and provide troubleshooting steps to help resolve them. Please refer to the respective subsections for detailed information on each problem.
Baby Lock Aerial Bobbin Holder Problems
Description of the Problem:
The bobbin holder on the Baby Lock Aerial is not functioning properly.
Cause of the Problem:
There could be various reasons for bobbin holder problems, such as incorrect installation, debris or lint buildup, or a damaged bobbin holder.
Troubleshooting Baby Lock Aerial bobbin holder problems:
- Ensure the bobbin holder is correctly inserted and securely in place.
- Remove any lint or debris from the bobbin holder and surrounding area.
- If the bobbin holder is damaged, replace it with a new one.
Bobbin Winding Problems – Bobbin Winder Not Spinning
Description of the Problem:
The bobbin winder on the Baby Lock Aerial is not spinning when attempting to wind the bobbin.
Cause of the Problem:
The bobbin winder may be jammed, the bobbin winder tire could be worn out, or there may be an issue with the machine’s internal mechanism.
Troubleshooting Bobbin winder problems on the Baby Lock Aerial:
- Check for any thread or debris that might be obstructing the bobbin winder. Clear it if found.
- Inspect the bobbin winder tire for signs of wear and replace it if necessary.
- If the issue persists, it’s recommended to consult a professional technician to diagnose and repair any internal mechanism problems.
Sewing Machine Tension Problems
Description of the Problem:
The tension on the Baby Lock Aerial sewing machine is not properly adjusted, resulting in uneven stitches.
Cause of the Problem:
Tension problems can occur due to incorrect thread routing, improper bobbin tension, or an issue with the machine’s tension disks.
Troubleshooting tension problems on the Baby Lock Aerial:
- Re-thread the machine, ensuring the thread is correctly routed through the tension disks and the bobbin case.
- Check the bobbin tension and adjust it if necessary following the manufacturer’s instructions.
- If the problem persists, it’s advisable to consult the user manual or contact a Baby Lock service center for further assistance.
Baby Lock Aerial Breaking Needles
Description of the Problem:
The needles on the Baby Lock Aerial keep breaking while sewing.
Cause of the Problem:
Needle breakage can occur due to various reasons, such as using the wrong needle size or type, incorrect needle installation, sewing through thick fabrics, or a misaligned needle bar.
Troubleshooting Baby Lock Aerial Needle Problems:
- Ensure you are using the correct needle size and type for the fabric you are sewing.
- Check that the needle is installed correctly, with the flat side facing the back of the machine.
- If sewing through thick fabrics, consider using a heavier-duty needle suitable for the material.
- If the problem persists, the needle bar may be misaligned, and it is advisable to seek professional assistance for realignment.
Baby Lock Aerial Keep Jamming
Description of the Problem:
The Baby Lock Aerial sewing machine keeps jamming during sewing.
Cause of the Problem:
Jamming can occur due to various reasons, such as incorrect threading, tangled thread, improper bobbin insertion, or a malfunctioning feed dog.
Troubleshooting Jamming Problems on the Baby Lock Aerial:
- Check the threading of the machine, ensuring it is done correctly as per the user manual.
- Remove any tangled thread or lint from the bobbin area and the thread path.
- Verify that the bobbin is inserted correctly and securely.
- If the feed dog is not moving or functioning properly, it may require cleaning or adjustment by a professional technician.
Baby Lock Aerial Fabric Problem
Description of the Problem:
The fabric on the Baby Lock Aerial is not moving smoothly during sewing.
Cause of the Problem:
Fabric movement issues can arise from factors like incorrect presser foot pressure, improper fabric handling, or a malfunctioning feed dog.
Troubleshooting fabric movement problems on the Baby Lock Aerial:
- Adjust the presser foot pressure to ensure it matches the fabric type and thickness.
- Handle the fabric smoothly, avoiding excessive pulling or pushing that could impede its movement.
- Clean the feed dog area from any lint or debris that might be obstructing its operation.
- If the feed dog is not moving or gripping the fabric properly, it may require professional cleaning or repair.
Baby Lock Aerial Upper Thread Breaking
Description of the Problem:
The upper thread on the Baby Lock Aerial keeps breaking during sewing.
Cause of the Problem:
Upper thread breakage can occur due to issues such as incorrect threading, tangled thread, improper tension settings, or a worn-out needle.
Troubleshooting Baby Lock Aerial Upper thread breakage:
- Ensure the machine is threaded correctly, following the threading path as specified in the user manual.
- Check for any tangled thread or debris in the thread path and remove it.
- Review the tension settings, making sure they are appropriate for the fabric and thread being used.
- Replace the needle if it appears worn or damaged.
Baby Lock Aerial Bobbin Thread Problems
Description of the Problem:
The bobbin thread on the Baby Lock Aerial is causing issues, such as tangling or not feeding properly.
Cause of the Problem:
Bobbin thread problems can stem from reasons like incorrect bobbin winding, incorrect bobbin installation, or tension issues.
Troubleshooting Baby Lock Aerial bobbin thread problems:
- Ensure the bobbin is wound correctly, with even tension and no loose or tight spots.
- Check that the bobbin is inserted correctly in the bobbin case, with the thread pulling off in the correct direction.
- Review the bobbin tension and adjust it if necessary following the manufacturer’s instructions.
Baby Lock Aerial Sewing Machine Bobbin Tension Problems
Description of the Problem:
The bobbin tension on the Baby Lock Aerial sewing machine is not properly adjusted.
Cause of the Problem:
Bobbin tension problems can arise from factors such as incorrect bobbin threading, lint buildup, or a malfunctioning tension mechanism.
Troubleshooting Baby Lock Aerial bobbin tension problems:
- Ensure the bobbin is threaded correctly, with the thread securely in the tension mechanism.
- Remove any lint or debris from the bobbin case and tension mechanism.
- If the tension mechanism is not functioning correctly, it may require professional cleaning or repair.
Baby Lock Aerial Stitch Problems
Description of the Problem:
The stitches produced by the Baby Lock Aerial sewing machine are not forming properly or are uneven.
Cause of the Problem:
Stitch problems can occur due to factors like incorrect thread tension, needle issues, or a misaligned needle bar.
Troubleshooting Baby Lock Aerial stitching problems:
- Review the thread tension settings, ensuring they are appropriate for the fabric and thread being used.
- Check the needle, replacing it if it appears worn, damaged, or bent.
- If the stitches are consistently uneven or skipping, the needle bar may be misaligned, and it’s advisable to seek professional assistance.
Baby Lock Aerial Sewing Machine Parts
Baby Lock Aerial Sewing Machine Presser Foot Problems
Description of the Problem:
The presser foot on the Baby Lock Aerial sewing machine is not functioning properly or causing issues during sewing.
Cause of the Problem:
Presser foot problems can arise from reasons such as incorrect installation, damaged presser foot, or issues with the presser foot lever.
Troubleshooting:
- Ensure the presser foot is installed correctly and securely.
- Inspect the presser foot for any damage or wear and replace it if necessary.
- If the presser foot lever is not moving or engaging properly, it may require professional attention.
Baby Lock Aerial Sewing Machine Motor Problems
Description of the Problem:
The motor of the Baby Lock Aerial sewing machine is not running or functioning as expected.
Cause of the Problem:
Motor problems can occur due to issues with power supply, motor belt, or internal motor components.
Troubleshooting:
- Check the power supply and ensure the machine is properly plugged in and receiving power.
- Inspect the motor belt for any signs of damage or looseness. Replace if necessary.
- If the motor still does not function, there may be internal motor issues, and it is recommended to consult a professional technician for diagnosis and repair.
Baby Lock Aerial Sewing Machine Belt Problems
Description of the Problem:
The belt on the Baby Lock Aerial sewing machine is slipping, broken, or causing issues with the machine’s operation.
Cause of the Problem:
Belt problems can occur due to wear and tear, improper tension, or incorrect installation.
Troubleshooting:
- Inspect the belt for signs of damage, such as cracks or fraying. Replace if necessary.
- Ensure the belt is properly tensioned. If it is too loose or too tight, adjust it according to the manufacturer’s instructions.
- If the belt continues to slip or cause issues, it may need to be replaced with a new one.
Baby Lock Aerial Sewing Machine Thread Cutter Problems
Description of the Problem:
The thread cutter on the Baby Lock Aerial sewing machine is not cutting the thread cleanly or is not functioning properly.
Cause of the Problem:
Thread cutter problems can arise from factors such as dull or misaligned cutting blade, debris buildup, or mechanical issues.
Troubleshooting:
- Inspect the cutting blade for any signs of dullness or damage. Replace if necessary.
- Clean the thread cutter area from any lint, thread, or debris that may be obstructing its operation.
- If the problem persists, there may be mechanical issues with the thread cutter mechanism, and it’s advisable to seek professional repair.
Baby Lock Aerial Sewing Machine Hand Wheel Problems
Description of the Problem:
The hand wheel on the Baby Lock Aerial sewing machine is difficult to turn or is not moving smoothly.
Cause of the Problem:
Hand wheel problems can occur due to factors such as thread entanglement, debris in the hand wheel mechanism, or internal mechanical issues.
Troubleshooting:
- Check for any entangled thread or debris around the hand wheel area. Remove it carefully.
- Clean the hand wheel mechanism to ensure smooth movement.
- If the hand wheel continues to be difficult to turn or exhibits abnormal behavior, there may be internal mechanical issues that require professional attention.
Baby Lock Aerial Manual
The instruction manual for the Baby Lock Aerial sewing machine can be found here. It provides comprehensive guidance on machine setup, operation, maintenance, and troubleshooting.
What Size Bobbin for Baby Lock Aerial?
The Baby Lock Aerial machine uses a Style A or Type 15 bobbin. This type of bobbin is commonly used in many sewing machines, including the Baby Lock Aerial. It is important to use the correct bobbin size to ensure proper functioning and stitch quality. The Style A or Type 15 bobbin is readily available and can be purchased from sewing supply stores or online retailers.
Baby Lock Aerial Cost
The price of the Baby Lock Aerial sewing and embroidery machine can vary depending on the retailer and any ongoing promotions or discounts. As of my knowledge cutoff, the average price for the Baby Lock Aerial was around $6,499. However, it’s best to check with authorized Baby Lock dealers or reputable sewing machine retailers for the most up-to-date pricing information.
Baby Lock Aerial Weight
The Baby Lock Aerial sewing and embroidery machine weighs approximately 33.7 pounds (15.3 kilograms) without the embroidery unit. When the embroidery unit is attached, the weight increases to around 42.2 pounds (19.1 kilograms). The Aerial is a versatile machine designed to elevate your sewing and embroidery projects with its advanced features.
FAQ
How do I troubleshoot thread breakage on the Baby Lock Aerial?
Thread breakage can be caused by various factors, such as incorrect threading, tension issues, or a worn-out needle. Please refer to the respective troubleshooting section for thread breakage to resolve the issue.
What should I do if my Baby Lock Aerial keeps jamming?
If your machine keeps jamming, it could be due to incorrect threading, tangled thread, improper bobbin insertion, or a malfunctioning feed dog. Please refer to the respective troubleshooting section for jamming problems for detailed steps to resolve the issue.
How do I adjust the tension on the Baby Lock Aerial?
Proper tension is crucial for achieving balanced stitches. The machine’s instruction manual provides detailed instructions on adjusting the tension settings based on the fabric and thread being used. Please consult the manual for specific steps.
Conclusion
The Baby Lock Aerial sewing machine offers a range of features and functionalities for your sewing projects. While encountering common problems is not uncommon, understanding the causes and following the troubleshooting steps can help resolve these issues effectively. For more detailed instructions and information, refer to the Baby Lock Aerial instruction manual available here. Happy sewing!