Husqvarna Sewing machine breaking needles

Sewing machines are a valuable tool for those who enjoy sewing as a hobby or profession. Husqvarna is a reputable brand of sewing machines that are widely used by many sewers. However, one of the most common issues that Husqvarna sewing machine users face is the breakage of needles.

Sewing machine needles can break for a variety of reasons. In this article, we will examine some common problems that cause needles to break on Husqvarna sewing machines and discuss ways to solve them.

List of the 10 main causes of breaking needles problems for the Husqvarna Sewing Machine

Here is a list of the main causes of breaking needles problems for the Husqvarna Sewing Machine:

Damaged or bent needle
Dull needle
Incorrect needle size for fabric

Incorrect needle and thread combination
Wrong thread tension
Incorrect presser foot attached to the machine

Incorrect threading of the machine
Sewing machine timing is off
Bobbin case or bobbin is damaged

Dirty machine or needs maintenance.

Common Problems Causing A Needle Break in Sewing Machine Husqvarna

The needle on sewing machine Husqvarna is damaged, bent

A common reason for a needle breaking on a Husqvarna sewing machine is a damaged or bent needle. This can occur due to several reasons, including accidentally hitting a pin or the sewing machine striking a hard object.

Reason: A damaged or bent needle can cause the sewing machine to skip stitches or even damage the fabric. It is important to change the needle if it is damaged or bent.

Solution: Replace the needle immediately if it is damaged or bent. To change the needle, first, turn off the sewing machine and unplug it. Remove the old needle by loosening the screw and replace it with a new needle of the correct size and type. Tighten the screw and plug in the sewing machine.

The needle on sewing machine Husqvarna is Dull

Another reason why needles break on Husqvarna sewing machines is due to dull needles. A dull needle will not penetrate the fabric cleanly, causing it to bend or break.

Reason: Sewing machine needles become dull over time with use, and can cause thread to break or fabric to pucker.

Solution: Replace the needle regularly. It is recommended to change the needle after every 8-10 hours of use. To change the needle, follow the same steps as mentioned above.

How to check the needle on a Husqvarna sewing machine

To check if the needle is damaged or dull, turn off the sewing machine and unplug it. Remove the needle and inspect it for any damage or bending. You can also run your finger along the needle tip to see if it is dull.

Incorrect Husqvarna needle size for fabric

The needle size must match the fabric type being used. Using the wrong needle size can cause the needle to break or bend.

Reason: Using a needle that is too small or too large for the fabric type can cause it to break, bend, or even damage the fabric.

Solution: Ensure that the needle size matches the fabric being used. A general rule of thumb is to use a smaller needle size for lighter fabrics and a larger needle size for heavier fabrics. Always refer to the Husqvarna manual for the recommended needle size for the fabric type.

Husqvarna Needle and thread combinations

Another cause of needle breakage on a Husqvarna sewing machine is using the wrong thread and needle combination. The wrong combination can cause the thread to break or the needle to bend.

Reason: Using the wrong thread and needle combination can cause the thread to break or the needle to bend.

Solution: Always refer to the Husqvarna manual for the recommended thread and needle combination for the fabric type being used.

Wrong Husqvarna sewing machine thread tension

The thread tension is an important aspect of sewing, and if it is too tight or too loose, it can cause the needle to break.

Reason: If the thread tension is too tight or too loose, it can cause the needle to break, as it is unable to move freely through the fabric.

Solution: Ensure that the thread tension is set correctly. Refer to the Husqvarna manual for instructions on how to adjust the thread tension. Test the tension on a scrap piece of fabric before beginning to sew on the actual project.

The wrong Husqvarna sewing machine presser foot is attached

Using the wrong presser foot on a Husqvarna sewing machine can cause the needle to break.

Reason: The presser foot helps to hold the fabric in place while sewing, and if the wrong foot is attached, it can cause the needle to hit the foot and break.

Solution: Always use the correct presser foot for the fabric being used. Refer to the Husqvarna manual for instructions on which foot to use for each type of fabric.

10 Other Problems with Husqvarna Sewing Machines

In addition to the problems already mentioned in this article, there are a few other issues that can arise with Husqvarna sewing machines. These include:

Sewing machine not feeding fabric

FAQ

What size needle should I use on my Husqvarna sewing machine?

The needle size you should use depends on the type of fabric you are sewing. Refer to the Husqvarna manual for instructions on which needle size to use for each type of fabric.

How often should I change the needle on my Husqvarna sewing machine?

It is recommended to change the needle after every 6-8 hours of sewing or after completing a project. If you notice any issues with the needle, such as dullness or bending, change it immediately.

Can I use universal needles on my Husqvarna sewing machine?

Yes, you can use universal needles on a Husqvarna sewing machine. However, it is recommended to use Husqvarna branded needles for the best results.

How do I know if the needle on my Husqvarna sewing machine is dull?

A dull needle can cause skipped stitches or fabric damage. You can inspect the needle for any visible damage or check the stitch quality to determine if the needle is dull.

Can I use metallic thread with a regular needle on my Husqvarna sewing machine?

It is recommended to use a metallic needle with metallic thread on a Husqvarna sewing machine. A regular needle may not be strong enough to handle the metallic thread.

Why is my Husqvarna sewing machine needle breaking?

The needle on a Husqvarna sewing machine can break due to various reasons, such as incorrect threading, wrong needle size, or incorrect thread tension. Refer to the manual for troubleshooting tips.

Can I sew leather with a Husqvarna sewing machine needle?

Yes, you can sew leather with a Husqvarna sewing machine needle. Use a leather needle for best results.

How do I know if I am using the correct thread for my Husqvarna sewing machine needle?

Use the thread recommended by Husqvarna for best results. The thread should match the needle size and type of fabric being sewn.

How do I clean my Husqvarna sewing machine needle?

Use a needle cleaner or a small brush to remove any lint or debris from the needle. You can also use a piece of fabric to gently wipe the needle.

Can I reuse a needle on my Husqvarna sewing machine?

It is not recommended to reuse needles on a Husqvarna sewing machine. A used needle may be dull or damaged, which can cause issues with the sewing project. Always use a new needle for each project.

Conclusion. Husqvarna Sewing machine breaking needles

In conclusion, sewing machine needles can break for various reasons. It is important to understand the common problems that cause needles to break on a Husqvarna sewing machine and how to solve them. Regular maintenance and correct use of the machine can help prevent needle breakage.

Always refer to the Husqvarna manual for instructions on how to use and maintain the machine properly. By following these guidelines, you can prevent needle breakage and enjoy hassle-free sewing on your Husqvarna sewing machine.