Husqvarna Viking Lily 535 Common Problems and Troubleshooting

Are you experiencing issues with your Husqvarna Viking Lily 535 sewing machine? Don’t worry; you’re not alone. In this article, we’ll delve into common problems that users may encounter with the Husqvarna Viking Lily 535 and provide troubleshooting solutions. Whether you’re a beginner or an experienced user, understanding these potential issues can help you maintain your sewing machine’s optimal performance.

Causes of Common Problems with the Husqvarna Viking Lily 535

This section will address various potential problems and solutions specific to the Husqvarna Viking Lily 535 sewing machine.

Common Problems with the Husqvarna Viking Lily 535

1. Thread Breakage

   Description of the Problem: Thread breakage during sewing.

   Cause of the Problem: Incorrect threading, using old or low-quality thread, tension issues.

   Troubleshooting Steps:

   1. Re-thread the machine following the correct threading path as per the user manual.
   2. Ensure the thread is of good quality and not old or brittle.
   3. Adjust the tension settings on the machine to the appropriate level for the fabric being used.

2. Uneven Stitches

   Description of the Problem: Stitches are uneven in length or tension.

   Cause of the Problem: Improper threading, bobbin tension issues, needle problems.

   Troubleshooting Steps:

   1. Check that the machine is correctly threaded, including the bobbin.
   2. Adjust the tension of the bobbin if necessary.
   3. Ensure the needle is not bent or damaged and is the appropriate size and type for the fabric being used.

3. Machine Jamming

   Description of the Problem: The machine gets stuck or jams while sewing.

   Cause of the Problem: Incorrect needle insertion, lint buildup, damaged or dull needle.

   Troubleshooting Steps:

   1. Ensure the needle is inserted correctly and securely.
   2. Clean out any lint or debris from the bobbin area and feed dogs.
   3. Replace the needle if it is damaged or dull.

4. Skipping Stitches

   Description of the Problem: The machine skips stitches during sewing.

   Cause of the Problem: Incorrect needle threading, needle dullness, improper needle size.

   Troubleshooting Steps:

   1. Check the needle threading and re-thread if necessary.
   2. Replace the needle if it is dull or bent.
   3. Use the correct needle size and type for the fabric being sewn.

5. Bobbin Tension Issues

   Description of the Problem: Uneven tension in the bobbin thread.

   Cause of the Problem: Improper bobbin threading, lint buildup in the bobbin case.

   Troubleshooting Steps:

   1. Ensure the bobbin is correctly inserted and threaded.
   2. Clean out any lint or debris from the bobbin case.
   3. Adjust the bobbin tension as needed.

Needle Breakage

Description of the Problem: Needles frequently break while sewing.

Cause of the Problem: Using incorrect needle size or type, sewing over pins, sewing through thick layers of fabric.

Troubleshooting Steps:

1. Ensure you are using the correct needle size and type for the fabric and thread being used.
2. Avoid sewing over pins, and remove them before they reach the needle.
3. Reduce the number of layers of fabric being sewn at once.

Bobbin Thread Showing on Top

Description of the Problem: The bobbin thread is visible on the top side of the fabric.

Cause of the Problem: Incorrect threading, improper tension settings, bobbin winding issues.

Troubleshooting Steps:

1. Check that the bobbin is correctly wound and inserted into the bobbin case.
2. Adjust the tension settings on the machine, ensuring they are balanced with the top thread.
3. Re-thread the machine, ensuring the bobbin thread is correctly placed.

Machine Making Unusual Noises

Description of the Problem: The sewing machine produces strange or loud noises during operation.

Cause of the Problem: Loose parts, lack of lubrication, foreign objects trapped in the machine.

Troubleshooting Steps:

1. Tighten any loose screws or parts on the machine.
2. Ensure the machine is properly lubricated according to the user manual.
3. Check for and remove any foreign objects lodged in the machine.

Fabric Not Feeding Properly

Description of the Problem: The fabric does not advance smoothly while sewing.

Cause of the Problem: Incorrect presser foot pressure, feed dogs not engaging, fabric caught in the machine.

Troubleshooting Steps:

1. Adjust the presser foot pressure according to the thickness of the fabric.
2. Ensure the feed dogs are engaged and functioning properly.
3. Remove any fabric caught in the machine and clean the feed dog area.

Thread Tangling in Bobbin Area

Description of the Problem: Thread becomes tangled or knotted in the bobbin area.

Cause of the Problem: Improper bobbin insertion, tension issues, using incorrect bobbin size.

Troubleshooting Steps:

1. Re-insert the bobbin, ensuring it is correctly threaded and inserted into the bobbin case.
2. Check and adjust the tension settings on the bobbin case if necessary.
3. Ensure you are using the correct size and type of bobbin for your machine.

Stitch Length Inconsistency

Description of the Problem: The length of stitches varies inconsistently.

Cause of the Problem: Incorrect stitch length setting, inconsistent machine speed, mechanical issues.

Troubleshooting Steps:

1. Check and adjust the stitch length setting on the machine.
2. Ensure consistent machine speed while sewing.
3. Inspect the machine for any mechanical issues or malfunctions.

Buttonhole Malfunctions

Description of the Problem: Issues occur while sewing buttonholes.

Cause of the Problem: Incorrect buttonhole settings, fabric thickness, worn-out buttonhole foot.

Troubleshooting Steps:

1. Verify the buttonhole settings and adjust them according to the fabric and button size.
2. Ensure the fabric thickness is appropriate for the selected buttonhole settings.
3. If using a buttonhole foot, check for wear and replace if necessary.

Thread Tension Problems

Description of the Problem: Inconsistent tension in the top or bobbin thread.

Cause of the Problem: Tension disks issues, improper threading, bobbin winding problems.

Troubleshooting Steps:

1. Clean tension disks and ensure they are functioning properly.
2. Re-thread the machine, making sure the thread is correctly guided through the tension mechanisms.
3. Check the bobbin winding process for any issues or irregularities.

Needle Not Picking Up Bobbin Thread

Description of the Problem: The needle fails to catch the bobbin thread.

Cause of the Problem: Incorrect needle positioning, timing issues, needle or bobbin mechanism malfunctions.

Troubleshooting Steps:

1. Check the needle position and ensure it is correctly inserted and oriented.
2. Verify the timing of the needle and bobbin mechanism according to the user manual.
3. Inspect the needle and bobbin mechanism for any signs of damage or malfunction.

Thread Fraying

Description of the Problem: Thread frays or shreds during sewing.

Cause of the Problem: Using a dull or incorrect needle, thread quality issues, improper tension settings.

Troubleshooting Steps:

1. Replace the needle with a new, appropriate one for the fabric being sewn.
2. Use high-quality thread suitable for the sewing project.
3. Adjust tension settings to prevent excessive thread tension.

Thread Bunching Underneath

Description of the Problem: Thread gathers or bunches up underneath the fabric.

Cause of the Problem: Improper bobbin tension, incorrectly threaded bobbin, lint or debris in the bobbin area.

Troubleshooting Steps:

1. Adjust the tension of the bobbin thread according to the machine’s manual.
2. Ensure the bobbin is threaded correctly and inserted properly into the bobbin case.
3. Clean out any lint or debris from the bobbin area.

Fabric Puckering

Description of the Problem: Fabric wrinkles or puckers while sewing.

Cause of the Problem: Incorrect tension settings, improper presser foot pressure, using the wrong needle type.

Troubleshooting Steps:

1. Adjust the tension settings on the machine, ensuring they are appropriate for the fabric being sewn.
2. Check and adjust the presser foot pressure to match the fabric thickness.
3. Ensure you are using the correct needle type for the fabric being sewn.

Needle Dragging Fabric

Description of the Problem: The needle catches and drags the fabric while sewing.

Cause of the Problem: Incorrect needle size or type, bent or damaged needle, feed dogs not engaged.

Troubleshooting Steps:

1. Use the appropriate needle size and type for the fabric being sewn.
2. Inspect the needle for any signs of bending or damage, and replace if necessary.
3. Ensure the feed dogs are engaged and functioning properly.

Thread Looping on Top

Description of the Problem: Loops of thread appear on the top side of the fabric.

Cause of the Problem: Incorrect threading, bobbin tension too loose, machine timing issues.

Troubleshooting Steps:

1. Re-thread the machine, ensuring the thread is correctly guided through all threading points.
2. Adjust the tension of the bobbin thread, tightening it slightly if loops persist.
3. Check the timing of the machine according to the manufacturer’s instructions.

Machine Not Powering On

Description of the Problem: The sewing machine does not turn on when plugged in.

Cause of the Problem: Power cord issues, faulty power switch, electrical problems.

Troubleshooting Steps:

1. Check the power cord for any damage or loose connections, and replace if necessary.
2. Ensure the power switch is in the “on” position and functioning correctly.
3. If possible, test the machine with a different power source to rule out electrical issues.

Needle hitting the presser foot

Description of the Problem: The needle hits the presser foot while sewing.

Cause of the Problem: Incorrect needle insertion, presser foot not raised, bent needle.

Troubleshooting Steps:

1. Ensure the needle is inserted correctly and facing the right direction.
2. Make sure the presser foot is raised before sewing.
3. Check the needle for any signs of bending or damage, and replace if necessary.

Thread Knots

Description of the Problem: Knots form in the thread while sewing.

Cause of the Problem: Thread tension too tight, thread catching on rough surfaces, threading issues.

Troubleshooting Steps:

1. Loosen the thread tension slightly to prevent excessive pulling.
2. Ensure the thread does not catch on any rough surfaces or edges.
3. Re-thread the machine, making sure the thread is correctly guided through all threading points.

Machine Skipping Stitches

Description of the Problem: The machine skips stitches intermittently.

Cause of the Problem: Dull or bent needle, incorrect needle size, timing issues.

Troubleshooting Steps:

1. Replace the needle with a new one, ensuring it is the correct size and type for the fabric.
2. Check the timing of the machine according to the manufacturer’s instructions.
3. If the issue persists, contact a qualified technician for further inspection.

Thread Snapping

Description of the Problem: The thread breaks suddenly while sewing.

Cause of the Problem: Thread tension too tight, sewing over thick seams, using old or weak thread.

Troubleshooting Steps:

1. Adjust the thread tension to a slightly looser setting.
2. Avoid sewing over thick seams or multiple layers of fabric without proper support.
3. Use high-quality, fresh thread suitable for the sewing project.

Uneven Feed Dogs

Description of the Problem: The feed dogs fail to move the fabric evenly.

Cause of the Problem: Debris or obstruction in the feed dog area, feed dog misalignment.

Troubleshooting Steps:

1. Clean the feed dog area thoroughly, removing any lint or debris.
2. Check the alignment of the feed dogs and adjust if necessary.
3. If the issue persists, contact a professional technician for further assistance.

Husqvarna Viking Lily 535 Sewing Machine Manual

You can find the operating instructions and manual for the Husqvarna Viking Lily 535 sewing machine on the manufacturer’s website. Refer to the official website for comprehensive guidance on using and maintaining your machine.

Frequently Asked Questions about the Husqvarna Viking Lily 535

1. How do I adjust the tension on my Husqvarna Viking Lily 535?

To adjust the tension on your Husqvarna Viking Lily 535, refer to the machine’s manual for specific instructions. Generally, tension adjustments can be made using the tension dial or knob located on the machine.

2. Why is my needle breaking frequently?

Frequent needle breakage may be caused by using the wrong needle size or type for your fabric, sewing over pins, or sewing through thick layers. Ensure you are using the correct needle and sewing techniques to prevent breakage.

3. How often should I clean and oil my Husqvarna Viking Lily 535?

Regular cleaning and oiling of your sewing machine are essential for its proper maintenance. Refer to the manual for recommended cleaning and oiling intervals, as they may vary depending on usage.

4. What should I do if my stitches are skipping?

If your stitches are skipping, check the needle for damage or dullness and replace if necessary. Ensure proper threading and tension settings, and make sure the machine is correctly threaded.

5. How can I troubleshoot bobbin thread tension issues?

If you’re experiencing bobbin thread tension issues, try adjusting the tension settings on the bobbin case. Clean out any lint or debris from the bobbin area, and ensure the bobbin is correctly inserted and threaded.

Conclusion

Always refer to the manual, customer service, or service center whenever possible if there is a problem with your Husqvarna Viking Lily 535 sewing machine. Following proper maintenance and troubleshooting procedures will help ensure optimal performance and longevity of your machine.

Husqvarna Viking Lily 530 Common Problems

Husqvarna Viking Lena Common Problems

Husqvarna Viking Juliet Common Problems