Husqvarna Viking Platinum 735 Common Problems and Troubleshooting
If you own a Husqvarna Viking Platinum 735 sewing machine, you might encounter some common issues during your sewing sessions. Don’t worry; we’re here to help you troubleshoot these problems effectively. In this guide, we’ll address various issues that users commonly face with the Husqvarna Viking Platinum 735 and provide step-by-step solutions to resolve them. Whether you’re experiencing stitching irregularities, tension problems, or other issues, this article will assist you in keeping your sewing machine running smoothly.
Causes of Common Problems with the Husqvarna Viking Platinum 735
This section will delve into the specific problems that Husqvarna Viking Platinum 735 users may encounter, along with troubleshooting steps to resolve them. Let’s explore potential issues and their solutions:
Common Problems with the Husqvarna Viking Platinum 735
1. Bobbin Thread Tension Issues
-
Description of the Problem:
The bobbin thread tension on the Husqvarna Viking Platinum 735 seems inconsistent, resulting in uneven stitches.
-
Cause of the Problem:
Incorrect threading of the bobbin or upper thread, debris in the tension disks, or incorrect tension settings can cause bobbin thread tension issues.
-
Troubleshooting Step-by-Step:
- Re-thread both the bobbin and upper thread, ensuring they are properly seated in the tension disks.
- Clean the tension disks and surrounding area to remove any lint or debris that may be affecting tension.
- Adjust the tension settings according to the user manual, making small changes until the tension is balanced.
2. Needle Breakage
-
Description of the Problem:
The needle frequently breaks while sewing with the Husqvarna Viking Platinum 735.
-
Cause of the Problem:
Using the wrong needle size or type for the fabric being sewn, bent or damaged needles, or incorrect needle insertion can lead to needle breakage.
-
Troubleshooting Step-by-Step:
- Ensure you are using the correct needle size and type for the fabric being sewn.
- Inspect the needle for any signs of damage or bending, and replace if necessary.
- Insert the needle properly according to the machine’s instructions, making sure it is fully seated and tightened.
3. Skipped Stitches
-
Description of the Problem:
The Husqvarna Viking Platinum 735 occasionally skips stitches while sewing, resulting in incomplete seams.
-
Cause of the Problem:
Improper needle threading, dull or damaged needle, incorrect needle size for the fabric, or incorrect machine settings can cause skipped stitches.
-
Troubleshooting Step-by-Step:
- Check the needle threading, ensuring it follows the correct path as per the machine’s manual.
- Replace the needle if it is dull or damaged.
- Use the appropriate needle size and type for the fabric being sewn.
- Adjust the machine settings, such as stitch length and tension, to ensure they are suitable for the chosen fabric and thread.
4. Jammed Bobbin Case
-
Description of the Problem:
The bobbin case of the Husqvarna Viking Platinum 735 gets jammed, preventing smooth sewing.
-
Cause of the Problem:
Lint or debris accumulation in the bobbin case, improper installation of the bobbin, or damaged bobbin case parts can cause jamming.
-
Troubleshooting Step-by-Step:
- Remove the bobbin case and clean any lint or debris that may be causing the jam.
- Reinstall the bobbin correctly, ensuring it is properly seated and rotates smoothly.
- Inspect the bobbin case for any signs of damage and replace any worn or broken parts.
5. Uneven Feed Dog Movement
-
Description of the Problem:
The feed dogs of the Husqvarna Viking Platinum 735 move unevenly, causing fabric to feed inconsistently.
-
Cause of the Problem:
Debris accumulation in the feed dog mechanism, incorrect presser foot pressure, or mechanical issues can lead to uneven feed dog movement.
-
Troubleshooting Step-by-Step:
- Clean the feed dog mechanism thoroughly to remove any lint or debris that may be hindering movement.
- Adjust the presser foot pressure according to the fabric being sewn, ensuring it is not too heavy or too light.
- If the problem persists, consult a professional technician to inspect and repair any mechanical issues with the feed dog mechanism.
6. Thread Bunching Underneath
- Description of the Problem:
Thread bunches up underneath the fabric while sewing with the Husqvarna Viking Platinum 735.
- Cause of the Problem:
Incorrect threading of the bobbin or upper thread, tension issues, or a dull needle can cause thread bunching underneath.
Troubleshooting Step-by-Step:
- Re-thread both the bobbin and upper thread, ensuring they follow the correct paths as per the machine’s manual.
- Check and adjust the tension settings to ensure they are balanced for the chosen fabric and thread.
- Replace the needle with a new, sharp one to prevent snagging and ensure smooth stitching.
7. Machine Making Unusual Noises
- Description of the Problem:
The Husqvarna Viking Platinum 735 emits unusual or loud noises while in operation.
- Cause of the Problem:
Loose or damaged parts, debris in the machine, or lack of lubrication can result in unusual noises during sewing.
Troubleshooting Step-by-Step:
- Inspect the machine for loose screws, bolts, or other parts, and tighten or replace them as necessary.
- Clean the machine thoroughly, removing any lint, dust, or debris that may be causing the noise.
- Apply lubrication to the appropriate parts of the machine as recommended in the user manual to ensure smooth operation.
8. Irregular Stitch Length
- Description of the Problem:
The stitch length on the Husqvarna Viking Platinum 735 is inconsistent, resulting in irregular seam lengths.
- Cause of the Problem:
Incorrect machine settings, improper presser foot pressure, or mechanical issues can lead to irregular stitch lengths.
Troubleshooting Step-by-Step:
- Adjust the machine settings to the desired stitch length, ensuring they are consistent throughout the sewing process.
- Check and adjust the presser foot pressure according to the fabric being sewn to prevent fabric slippage.
- If the problem persists, consult a professional technician to inspect and repair any mechanical issues with the machine.
9. Fabric Not Feeding Properly
- Description of the Problem:
The fabric does not feed smoothly or evenly through the feed dogs of the Husqvarna Viking Platinum 735.
- Cause of the Problem:
Dirty or damaged feed dogs, improper presser foot pressure, or incorrect stitch length settings can cause fabric feeding issues.
Troubleshooting Step-by-Step:
- Clean the feed dogs thoroughly to remove any lint, dust, or debris that may be obstructing smooth fabric feeding.
- Adjust the presser foot pressure to ensure it is appropriate for the fabric being sewn.
- Check and adjust the stitch length settings to match the fabric and sewing technique being used.
10. Bobbin Running Out Too Quickly
- Description of the Problem:
The bobbin thread on the Husqvarna Viking Platinum 735 seems to run out faster than expected, requiring frequent replacement.
- Cause of the Problem:
Improper bobbin winding tension, incorrect bobbin type, or excessive thread usage can cause the bobbin to run out quickly.
Troubleshooting Step-by-Step:
- Ensure the bobbin is wound evenly and with the correct tension to prevent it from running out too quickly.
- Use the appropriate type and weight of bobbin thread for the chosen fabric and sewing project.
- Practice efficient thread usage techniques to minimize waste and extend the life of the bobbin thread.
11. Thread Fraying or Breaking
- Description of the Problem:
The thread used in the Husqvarna Viking Platinum 735 sewing machine frays or breaks frequently during sewing.
- Cause of the Problem:
Using low-quality or old thread, incorrect needle size or type, or tension issues can cause thread fraying or breakage.
Troubleshooting Step-by-Step:
- Ensure you are using high-quality thread suitable for the chosen fabric and sewing project.
- Check that the needle size and type match the thread being used, and replace if necessary.
- Adjust the tension settings to ensure they are balanced for the thread and fabric combination.
12. Buttonhole Malfunction
- Description of the Problem:
The automatic buttonhole function of the Husqvarna Viking Platinum 735 does not produce satisfactory results.
- Cause of the Problem:
Incorrect buttonhole settings, improper fabric positioning, or mechanical issues can lead to buttonhole malfunctions.
Troubleshooting Step-by-Step:
- Refer to the machine’s manual to ensure the buttonhole settings are configured correctly.
- Position the fabric properly in the buttonhole foot and ensure it is stabilized for smooth stitching.
- If the problem persists, consult a professional technician to inspect and repair any mechanical issues with the buttonhole function.
13. Needle Threader Not Working
- Description of the Problem:
The automatic needle threader feature of the Husqvarna Viking Platinum 735 fails to thread the needle properly.
- Cause of the Problem:
Improper alignment of the needle and threader, bent or damaged needle threader, or mechanical issues can cause needle threader malfunction.
Troubleshooting Step-by-Step:
- Ensure the needle is correctly positioned and fully inserted into the needle holder.
- Inspect the needle threader for any signs of damage or misalignment, and replace if necessary.
- If the problem persists, consult a professional technician to inspect and repair any mechanical issues with the needle threader.
14. Uneven Stitch Formation
- Description of the Problem:
The stitches produced by the Husqvarna Viking Platinum 735 sewing machine are uneven or irregular.
- Cause of the Problem:
Uneven tension, incorrect machine settings, or mechanical issues can result in uneven stitch formation.
Troubleshooting Step-by-Step:
- Check and adjust the tension settings to ensure they are balanced for the chosen fabric and thread.
- Verify that the machine settings, such as stitch length and width, are appropriate for the sewing project.
- If the problem persists, consult a professional technician to inspect and repair any mechanical issues with the machine.
15. Fabric Puckering
- Description of the Problem:
The fabric sewn with the Husqvarna Viking Platinum 735 appears puckered or gathered.
- Cause of the Problem:
Incorrect tension settings, using the wrong needle or presser foot, or sewing too quickly can cause fabric puckering.
Troubleshooting Step-by-Step:
- Adjust the tension settings to achieve a balanced stitch formation without causing fabric distortion.
- Ensure you are using the appropriate needle and presser foot for the fabric being sewn.
- Slow down the sewing speed to allow the fabric to feed smoothly and prevent puckering.
16. Fabric Jamming in the Feed Dogs
- Description of the Problem:
The fabric gets stuck or jams in the feed dogs of the Husqvarna Viking Platinum 735 sewing machine.
- Cause of the Problem:
Improper fabric handling, accumulation of lint or debris in the feed dogs, or mechanical issues can lead to fabric jamming.
Troubleshooting Step-by-Step:
- Ensure the fabric is positioned and guided properly to prevent it from getting caught in the feed dogs.
- Clean the feed dogs and surrounding area thoroughly to remove any lint, dust, or debris that may be causing the jam.
- If the problem persists, consult a professional technician to inspect and repair any mechanical issues with the feed dog mechanism.
17. Stitching Skipping Randomly
- Description of the Problem:
The Husqvarna Viking Platinum 735 sewing machine occasionally skips stitches without any apparent pattern or reason.
- Cause of the Problem:
Bobbin or upper thread tension issues, needle problems, or timing issues can cause random stitching skipping.
Troubleshooting Step-by-Step:
- Check and adjust both bobbin and upper thread tensions to ensure they are balanced and consistent.
- Inspect the needle for any signs of damage or bending, and replace if necessary.
- If the problem persists, consult a professional technician to inspect and adjust the timing of the machine.
18. Thread Getting Caught in the Bobbin Area
- Description of the Problem:
The thread frequently gets tangled or caught in the bobbin area of the Husqvarna Viking Platinum 735 sewing machine.
- Cause of the Problem:
Improper bobbin installation, debris accumulation in the bobbin case, or mechanical issues can cause thread entanglement in the bobbin area.
Troubleshooting Step-by-Step:
- Ensure the bobbin is inserted correctly and rotates smoothly in the bobbin case.
- Clean the bobbin case and surrounding area to remove any lint, dust, or debris that may be causing the thread to get caught.
- If the problem persists, consult a professional technician to inspect and repair any mechanical issues with the bobbin area.
19. Thread Spool Getting Stuck
- Description of the Problem:
The thread spool on the Husqvarna Viking Platinum 735 sewing machine gets stuck or does not rotate smoothly during sewing.
- Cause of the Problem:
Improper spool placement, rough or damaged spool holder, or threading issues can cause the thread spool to get stuck.
Troubleshooting Step-by-Step:
- Ensure the thread spool is placed correctly on the spool holder and is not too tight or loose.
- Inspect the spool holder for any signs of damage or rough edges that may be causing the thread to snag.
- Re-thread the machine, paying close attention to the thread path and tension to prevent issues with thread feeding.
20. Uneven Thread Tension Across Fabric
- Description of the Problem:
The tension of the thread varies inconsistently across the fabric when sewing with the Husqvarna Viking Platinum 735.
- Cause of the Problem:
Dirty or damaged tension disks, incorrect threading, or mechanical issues can cause uneven thread tension across the fabric.
Troubleshooting Step-by-Step:
- Clean the tension disks thoroughly to remove any lint, dust, or debris that may be affecting tension.
- Re-thread the machine, ensuring the thread follows the correct path and is properly seated in the tension disks.
- If the problem persists, consult a professional technician to inspect and repair any mechanical issues with the tension mechanism.
21. Thread Birdnesting on the Underside
- Description of the Problem:
Thread birdnesting occurs frequently on the underside of the fabric when sewing with the Husqvarna Viking Platinum 735.
- Cause of the Problem:
Incorrect bobbin tension, threading issues, or sewing at high speeds can cause thread birdnesting.
Troubleshooting Step-by-Step:
- Adjust the bobbin tension to ensure it is balanced with the upper thread tension.
- Re-thread the machine, ensuring the thread follows the correct path and is properly seated in the tension disks.
- Reduce the sewing speed to prevent excessive thread buildup and birdnesting.
22. Fabric Puckering While Backstitching
- Description of the Problem:
The fabric puckers or gathers excessively when backstitching with the Husqvarna Viking Platinum 735.
- Cause of the Problem:
Incorrect tension settings, improper stitch length, or sewing too quickly during backstitching can cause fabric puckering.
Troubleshooting Step-by-Step:
- Adjust the tension settings to achieve a balanced stitch formation without causing fabric distortion.
- Verify that the stitch length is appropriate for backstitching and adjust if necessary.
- Slow down the sewing speed during backstitching to allow the fabric to feed smoothly and prevent puckering.
23. Thread Breaking at the Needle Eye
- Description of the Problem:
The thread frequently breaks at the needle eye when sewing with the Husqvarna Viking Platinum 735.
- Cause of the Problem:
Using a needle with a small eye, incorrect threading, or sewing with too much tension can cause thread breakage at the needle eye.
Troubleshooting Step-by-Step:
- Ensure you are using a needle with an appropriate-sized eye for the thread being used.
- Re-thread the machine, ensuring the thread follows the correct path and is properly seated in the tension disks.
- Reduce the tension settings slightly to alleviate stress on the thread and prevent breakage.
24. Uneven Seam Allowances
- Description of the Problem:
The seam allowances produced by the Husqvarna Viking Platinum 735 sewing machine are uneven or inconsistent.
- Cause of the Problem:
Incorrect presser foot pressure, uneven fabric feeding, or mechanical issues can cause uneven seam allowances.
Troubleshooting Step-by-Step:
- Adjust the presser foot pressure to ensure it is even across the fabric for consistent feeding.
- Check the feed dog mechanism and ensure it is clean and functioning properly.
- If the problem persists, consult a professional technician to inspect and repair any mechanical issues with the machine.
25. Inconsistent Thread Tension Across Fabric Layers
- Description of the Problem:
The tension of the thread varies inconsistently when sewing multiple layers of fabric with the Husqvarna Viking Platinum 735.
- Cause of the Problem:
Improper presser foot pressure, incorrect needle size or type, or tension issues can cause inconsistent thread tension across fabric layers.
Troubleshooting Step-by-Step:
- Adjust the presser foot pressure to ensure it is appropriate for the thickness of the fabric layers being sewn.
- Use a needle suitable for sewing through multiple layers of fabric, and ensure it is inserted correctly.
- Check and adjust the tension settings to achieve balanced tension across all layers of fabric.
Husqvarna Viking Platinum 735 Sewing Machine Manual
The operating instructions for the Husqvarna Viking Platinum 735 sewing machine can be found on the manufacturer’s website. Please visit the official Husqvarna Viking website to access the manual and learn more about the proper use and maintenance of your sewing machine.
Frequently Asked Questions about the Husqvarna Viking Platinum 735
1. How can I troubleshoot bobbin tension issues on my Husqvarna Viking Platinum 735?
To troubleshoot bobbin tension issues, ensure that the bobbin is correctly inserted and threaded, clean the bobbin area, and adjust the tension settings according to the manual.
2. What should I do if my needle keeps breaking while using the Husqvarna Viking Platinum 735?
If your needle keeps breaking, check for correct needle insertion, use the appropriate needle size and type for your fabric, and replace the needle if it is damaged or dull.
3. How can I prevent skipped stitches on the Husqvarna Viking Platinum 735?
To prevent skipped stitches, ensure proper threading of both the upper thread and bobbin, use the correct needle size and type for your fabric, and adjust the machine settings as needed.
4. Why does my fabric keep getting stuck in the feed dogs of the Husqvarna Viking Platinum 735?
If your fabric keeps getting stuck, check for proper fabric handling, clean the feed dogs and surrounding area, and adjust the presser foot pressure to ensure smooth fabric feeding.
5. What should I do if my Husqvarna Viking Platinum 735 is making unusual noises?
If your sewing machine is making unusual noises, check for loose or damaged parts, clean the machine thoroughly, and lubricate moving parts according to the manual.
Conclusion
Always refer to the manual, customer service, or a service center whenever possible if there is a problem with your Husqvarna Viking Platinum 735 sewing machine. Proper maintenance and troubleshooting techniques can help resolve common issues and ensure optimal performance.
Husqvarna Viking Platinum 730 Common Problems
