by

Husqvarna Viking S15 Huskylock SERGER Common Problems and Troubleshooting

This article addresses common issues that users may encounter with the Husqvarna Viking S15 Huskylock SERGER sewing machine. Whether you’re a beginner or experienced user, understanding potential problems and their solutions can enhance your sewing experience.

Causes of Common Problems with the Husqvarna Viking S15 Huskylock SERGER

1. Tension Issues – Thread Breakage

  • Description: The machine frequently experiences thread breakage during sewing.
  • Cause: Incorrect tension settings or improper threading.
  • Troubleshooting:
    1. Check the tension settings according to the machine manual for the specific fabric being used.
    2. Ensure the threads are correctly threaded through the tension discs and guides.
    3. Test sew on a scrap fabric to adjust tension settings gradually until the thread breakage stops.

2. Stitch Skipping – Uneven Stitch Formation

  • Description: The machine skips stitches or produces uneven stitch formations.
  • Cause: Dull or improperly inserted needles, or incorrect needle size for the fabric.
  • Troubleshooting:
    1. Replace the needle with a new, appropriate needle size for the fabric being used.
    2. Ensure the needle is correctly inserted and tightened.
    3. Regularly maintain and replace needles as needed.

3. Fabric Jamming – Feed Dog Issues

  • Description: The fabric gets stuck or jams while sewing.
  • Cause: Improper feed dog alignment or obstruction.
  • Troubleshooting:
    1. Inspect the feed dogs for any debris or obstructions and clean them if necessary.
    2. Check the alignment of the feed dogs according to the machine manual.
    3. Test sew on scrap fabric to ensure smooth fabric feeding.

4. Motor Issues – Machine Not Running Smoothly

  • Description: The machine’s motor operates erratically or produces unusual noises.
  • Cause: Lack of lubrication or mechanical issues within the motor.
  • Troubleshooting:
    1. Apply lubrication to the moving parts of the machine, following the manufacturer’s recommendations.
    2. If the issue persists, consult a professional technician for motor inspection and repair.

5. Blade Alignment – Uneven Cutting

  • Description: The cutting blade produces uneven cuts or fails to trim fabric properly.
  • Cause: Misalignment of the cutting blade or dull blade.
  • Troubleshooting:
    1. Check and adjust the alignment of the cutting blade according to the machine manual.
    2. If the blade is dull, replace it with a new one.

1. Thread Breakage

  • Description of the problem: The thread frequently breaks while using the Husqvarna Viking S15 Huskylock SERGER.
  • Cause of the problem: Improper threading, tension issues, or using low-quality thread can lead to thread breakage.
  • Troubleshooting step-by-step:
    1. Re-thread the machine following the manufacturer’s instructions carefully.
    2. Check the tension settings for both the upper and lower threads and adjust as necessary.
    3. Use high-quality thread suitable for serging to prevent breakage.

2. Uneven Stitching

  • Description of the problem: The stitches produced by the Husqvarna Viking S15 Huskylock SERGER are uneven.
  • Cause of the problem: Uneven tension, incorrect differential feed settings, or dull blades can result in uneven stitching.
  • Troubleshooting step-by-step:
    1. Check and adjust the tension settings for both the upper and lower threads to ensure they are balanced.
    2. Adjust the differential feed ratio to match the fabric being sewn.
    3. If the blades are dull, replace them with new ones to ensure clean cutting of fabric.

3. Fabric Skipping Stitches

  • Description of the problem: The Husqvarna Viking S15 Huskylock SERGER occasionally skips stitches while sewing.
  • Cause of the problem: Incorrect threading, improperly seated needles, or using the wrong needle size can cause fabric skipping stitches.
  • Troubleshooting step-by-step:
    1. Check the threading of the machine and re-thread if necessary, ensuring proper placement of threads in all guides and tension discs.
    2. Ensure that the needles are securely inserted and properly aligned.
    3. Use the appropriate needle size and type for the fabric being sewn.

4. Machine Jamming

  • Description of the problem: The Husqvarna Viking S15 Huskylock SERGER gets jammed during operation.
  • Cause of the problem: Accumulation of lint or debris in the machine, incorrect threading, or mechanical issues can lead to jamming.
  • Troubleshooting step-by-step:
    1. Clean the machine thoroughly, removing any lint or debris from the bobbin area, feed dogs, and cutting mechanism.
    2. Re-thread the machine, ensuring correct threading according to the manufacturer’s instructions.
    3. If the problem persists, consult the user manual for troubleshooting mechanical issues or seek professional repair.

5. Excessive Noise

  • Description of the problem: The Husqvarna Viking S15 Huskylock SERGER produces excessive noise during operation.
  • Cause of the problem: Loose parts, improper lubrication, or worn-out components can cause excessive noise.
  • Troubleshooting step-by-step:
    1. Check for any loose screws or parts and tighten them if necessary.
    2. Ensure proper lubrication of moving parts according to the manufacturer’s recommendations.
    3. If the noise persists, inspect the machine for worn-out components and replace them as needed.

6. Fabric Puckering

  • Description of the problem: The fabric puckers or gathers excessively while serging with the Husqvarna Viking S15 Huskylock SERGER.
  • Cause of the problem: Incorrect tension settings, using the wrong needle type or size, or sewing too quickly can cause fabric puckering.
  • Troubleshooting step-by-step:
    1. Adjust the tension settings on the machine, gradually increasing or decreasing tension until the fabric lays flat.
    2. Ensure that the needle type and size are appropriate for the fabric being sewn.
    3. Slow down the sewing speed to allow the machine to stitch more accurately and prevent puckering.

7. Needle Breakage

  • Description of the problem: Needles frequently break while using the Husqvarna Viking S15 Huskylock SERGER.
  • Cause of the problem: Using incorrect needle size or type, hitting pins or other hard objects, or sewing through thick layers of fabric can cause needle breakage.
  • Troubleshooting step-by-step:
    1. Ensure that the needles are the appropriate size and type for the fabric and thread being used.
    2. Avoid sewing over pins or any other hard objects that could damage the needle.
    3. If sewing through multiple layers of fabric, consider using a heavier-duty needle designed for such applications.

8. Stitch Skipped Loops

  • Description of the problem: The Husqvarna Viking S15 Huskylock SERGER occasionally produces skipped or missing loops in the stitches.
  • Cause of the problem: Improper threading, incorrect needle positioning, or worn-out loopers can result in skipped loops.
  • Troubleshooting step-by-step:
    1. Check the threading of the loopers and re-thread if necessary, ensuring proper placement of threads in all guides.
    2. Verify that the needles are inserted correctly and securely in their positions.
    3. If the loopers are worn or damaged, replace them according to the manufacturer’s recommendations.

9. Fabric Jamming in Feed Dogs

  • Description of the problem: Fabric gets stuck or jammed in the feed dogs of the Husqvarna Viking S15 Huskylock SERGER.
  • Cause of the problem: Incorrect differential feed settings, buildup of lint or debris, or using the wrong foot pressure can cause fabric jamming.
  • Troubleshooting step-by-step:
    1. Adjust the differential feed ratio to match the fabric being sewn, preventing excessive stretching or gathering.
    2. Clean the feed dogs regularly, removing any lint or debris that could obstruct fabric movement.
    3. Ensure that the foot pressure is set correctly for the fabric thickness to prevent jamming.

10. Inconsistent Stitch Length

  • Description of the problem: The stitch length varies unpredictably while using the Husqvarna Viking S15 Huskylock SERGER.
  • Cause of the problem: Incorrect settings, mechanical issues, or worn-out parts can lead to inconsistent stitch length.
  • Troubleshooting step-by-step:
    1. Check and adjust the stitch length settings on the machine, ensuring they are consistent with the desired stitch length.
    2. If the problem persists, inspect the machine for any mechanical issues, such as worn-out gears or belts, and address them accordingly.
    3. Regular maintenance, including lubrication and cleaning, can also help ensure consistent stitch length over time.

11. Fabric Gathering at Needle Plate

  • Description of the problem: Fabric tends to gather or bunch up around the needle plate area of the Husqvarna Viking S15 Huskylock SERGER.
  • Cause of the problem: Incorrect differential feed settings, improper threading, or using the wrong needle type can cause fabric gathering at the needle plate.
  • Troubleshooting step-by-step:
    1. Adjust the differential feed ratio to match the fabric being sewn, ensuring smooth fabric feed.
    2. Re-thread the machine, paying close attention to proper threading in all guides and tension discs.
    3. Use the appropriate needle type and size for the fabric to prevent fabric gathering.

12. Loose Stitches

  • Description of the problem: Stitches produced by the Husqvarna Viking S15 Huskylock SERGER are loose and easily unravel.
  • Cause of the problem: Incorrect tension settings, worn-out needles, or improper threading can result in loose stitches.
  • Troubleshooting step-by-step:
    1. Adjust the tension settings on the machine, gradually increasing tension until stitches are properly formed and secure.
    2. Replace worn-out needles with new ones to ensure clean stitching.
    3. Double-check the threading of the machine, making sure all threads are properly seated in their respective guides.

13. Fabric Edge Fraying

  • Description of the problem: The edges of the fabric fray excessively while serging with the Husqvarna Viking S15 Huskylock SERGER.
  • Cause of the problem: Using incorrect tension settings, dull blades, or sewing too close to the fabric edge can cause fabric edge fraying.
  • Troubleshooting step-by-step:
    1. Adjust the tension settings on the machine to ensure proper tension for the fabric being sewn.
    2. If the blades are dull, replace them with new ones to ensure clean cutting of fabric edges.
    3. Leave a small margin of fabric beyond the knife blade to prevent fraying.

14. Limited Stitch Options

  • Description of the problem: The Husqvarna Viking S15 Huskylock SERGER offers limited stitch options or fails to produce desired stitches.
  • Cause of the problem: Incorrect settings, mechanical issues, or software glitches can limit stitch options or functionality.
  • Troubleshooting step-by-step:
    1. Refer to the user manual to ensure proper selection and setup of stitch options.
    2. If certain stitches are not working, check for any mechanical issues such as jammed mechanisms or loose parts.
    3. If problems persist, consider resetting the machine to its default settings or contacting customer support for assistance.

15. Fabric Slippage

  • Description of the problem: The fabric slips or shifts during serging with the Husqvarna Viking S15 Huskylock SERGER.
  • Cause of the problem: Incorrect presser foot pressure, improper threading, or using unsuitable fabric can cause fabric slippage.
  • Troubleshooting step-by-step:
    1. Adjust the presser foot pressure to ensure proper fabric feeding without slippage.
    2. Double-check the threading of the machine, making sure all threads are correctly routed and tensioned.
    3. Choose fabrics appropriate for serging and avoid using slippery or stretchy materials that may cause slippage.

11. Blade Dulling

  • Description of the problem: The blades of the Husqvarna Viking S15 Huskylock SERGER become dull over time.
  • Cause of the problem: Regular use and cutting of fabric can lead to gradual dulling of the machine’s blades.
  • Troubleshooting step-by-step:
    1. Regularly inspect the blades for signs of dullness, such as frayed edges or difficulty cutting fabric.
    2. If the blades are dull, replace them with new ones according to the manufacturer’s recommendations.
    3. Ensure proper maintenance by cleaning the blades and lubricating them as needed to prolong their sharpness.

12. Tension Discrepancies

  • Description of the problem: The tension settings on the Husqvarna Viking S15 Huskylock SERGER seem inconsistent or erratic.
  • Cause of the problem: Issues with tension discs, thread quality, or improper threading can result in tension discrepancies.
  • Troubleshooting step-by-step:
    1. Inspect the tension discs for any debris or damage that may interfere with proper tension adjustment.
    2. Use high-quality thread appropriate for serging to prevent inconsistencies in tension.
    3. Re-thread the machine carefully, ensuring the threads are correctly seated in all tension discs and guides.

13. Foot Pedal Malfunction

  • Description of the problem: The foot pedal of the Husqvarna Viking S15 Huskylock SERGER does not respond properly.
  • Cause of the problem: Faulty wiring, loose connections, or internal component issues can cause foot pedal malfunctions.
  • Troubleshooting step-by-step:
    1. Inspect the foot pedal and its wiring for any visible damage or loose connections.
    2. Check the power supply and ensure that the machine is properly plugged in.
    3. If the problem persists, consult the user manual for instructions on disassembling the foot pedal for further inspection or contact customer support for assistance.

14. Differential Feed Problems

  • Description of the problem: The differential feed mechanism of the Husqvarna Viking S15 Huskylock SERGER does not function as expected.
  • Cause of the problem: Misalignment, mechanical issues, or improper settings can lead to differential feed problems.
  • Troubleshooting step-by-step:
    1. Check the settings of the differential feed mechanism and adjust them according to the fabric being sewn.
    2. Inspect the feed dogs and ensure they are clean and free of obstructions.
    3. If the problem persists, refer to the user manual for instructions on troubleshooting mechanical issues or contact customer support for assistance.

15. Thread Jamming in Tension Disks

  • Description of the problem: Thread becomes jammed or stuck in the tension disks of the Husqvarna Viking S15 Huskylock SERGER.
  • Cause of the problem: Improper threading, debris accumulation, or tension disk misalignment can lead to thread jamming.
  • Troubleshooting step-by-step:
    1. Remove the thread from the tension disks and re-thread the machine carefully, ensuring the thread passes smoothly through all guides and disks.
    2. Clean the tension disks and surrounding area to remove any lint or debris that may be causing the jamming.
    3. If the problem persists, check for any misalignment of the tension disks and adjust them as needed.

Husqvarna Viking S15 Huskylock SERGER Sewing Machine Manual

To access the operating instructions for the Husqvarna Viking S15 Huskylock SERGER, please visit the manufacturer’s website.

Husqvarna Viking S15 Huskylock SERGER Frequently Asked Questions

1. How do I thread the Husqvarna Viking S15 Huskylock SERGER?

Threading instructions for the Husqvarna Viking S15 Huskylock SERGER can be found in the machine’s user manual. Follow the step-by-step guide provided by the manufacturer to ensure proper threading.

2. Why does my thread keep breaking?

Thread breakage can occur due to various reasons, including improper threading, incorrect tension settings, or using low-quality thread. Refer to the troubleshooting section in the user manual to address this issue.

3. What should I do if the stitches are uneven?

Uneven stitches may be caused by factors such as incorrect tension settings, improper needle insertion, or dull blades. Check the machine’s settings and make necessary adjustments following the instructions provided in the manual.

4. How can I prevent fabric puckering?

Fabric puckering can be minimized by ensuring proper tension settings, using the correct needle type and size for the fabric, and adjusting sewing speed. Refer to the troubleshooting tips in the user manual for further assistance.

5. What should I do if my machine jams?

If your Husqvarna Viking S15 Huskylock SERGER jams during operation, first turn off the machine and carefully remove any fabric or thread causing the jam. Refer to the user manual for instructions on troubleshooting and resolving jamming issues.

Conclusion

It’s advisable for users to always refer to the manual, customer service, or service center whenever possible if there is a problem with their Husqvarna Viking S15 Huskylock SERGER. These resources can provide accurate guidance and support for troubleshooting and resolving issues.


Husqvarna Viking Rose 605 Common Problems

Husqvarna Viking Rose 600 Common Problems

Husqvarna Viking Romeo Common Problems

Leave a Comment