Husqvarna Viking Tribute 145C Common Problems and Troubleshooting
Are you experiencing issues with your Husqvarna Viking Tribute 145C sewing machine? Don’t worry, we’re here to help! In this guide, we’ll address common problems that users may encounter with this particular model and provide troubleshooting solutions to get you back to sewing smoothly.
Causes of Common Problems with the Husqvarna Viking Tribute 145C
Here you can find all the parts and accessories for the Husqvarna Viking Tribute 145C guaranteed to fit your sewing machine
1. Thread Tension Issues on the Husqvarna Viking Tribute 145C
- Description of the problem: Uneven stitches or thread bunching on the fabric.
- Cause of the problem: Incorrect thread tension settings.
- Troubleshooting step-by-step:
- Check the tension dial on the machine and ensure it is set to the appropriate setting for the fabric being used.
- Re-thread the machine, ensuring the thread is properly seated in the tension disks.
- Test stitch on a scrap fabric to adjust the tension gradually until stitches appear even.
2. Bobbin Jamming on the Husqvarna Viking Tribute 145C
- Description of the problem: Bobbin thread getting tangled or jammed during sewing.
- Cause of the problem: Improperly wound bobbin or debris in the bobbin area.
- Troubleshooting step-by-step:
- Remove the bobbin case and clean out any lint or debris in the bobbin area.
- Re-wind the bobbin following the machine’s instructions carefully, ensuring even winding.
- Check that the bobbin is inserted correctly into the bobbin case and that the thread is feeding smoothly.
3. Needle Breakage on the Husqvarna Viking Tribute 145C
- Description of the problem: Needles breaking frequently during sewing.
- Cause of the problem: Use of incorrect needle size or bent needle.
- Troubleshooting step-by-step:
- Ensure the needle is the correct size and type for the fabric being used.
- Inspect the needle for any signs of damage or bending, and replace if necessary.
- Check the needle is inserted correctly and tightened securely in the machine.
4. Machine Not Powering On for the Husqvarna Viking Tribute 145C
- Description of the problem: Sewing machine does not respond when power is switched on.
- Cause of the problem: Faulty power connection or malfunctioning power switch.
- Troubleshooting step-by-step:
- Check the power cord and ensure it is securely plugged into a working outlet.
- Inspect the power switch for any damage or signs of malfunction, and replace if necessary.
- If available, test the machine with a different power cord to rule out a faulty cord.
5. Skipped Stitches on the Husqvarna Viking Tribute 145C
- Description of the problem: Stitches are occasionally skipped during sewing.
- Cause of the problem: Dull or damaged needle, incorrect threading, or sewing too fast.
- Troubleshooting step-by-step:
- Replace the needle with a new, sharp one suitable for the fabric being used.
- Check the threading of the machine, ensuring it follows the correct path as per the manual.
- Reduce sewing speed and ensure a consistent speed to prevent skipped stitches.
6. Bobbin Thread Showing on Top of Fabric with the Husqvarna Viking Tribute 145C
- Description of the problem: Bobbin thread is visible on the top side of the fabric after sewing.
- Cause of the problem: Incorrect bobbin tension or improperly threaded bobbin.
- Troubleshooting step-by-step:
- Check the bobbin tension and adjust it if necessary, ensuring it matches the upper thread tension.
- Re-thread the bobbin, making sure the thread is properly seated in the bobbin case and follows the correct path.
- Test stitch on scrap fabric to verify the adjustment.
7. Fabric Not Feeding Smoothly on the Husqvarna Viking Tribute 145C
- Description of the problem: Fabric does not move smoothly under the presser foot during sewing.
- Cause of the problem: Incorrect presser foot pressure or feed dog issues.
- Troubleshooting step-by-step:
- Adjust the presser foot pressure according to the fabric being used, ensuring it grips the fabric adequately.
- Clean the feed dogs and remove any lint or debris that may be obstructing smooth fabric movement.
- If necessary, lower the feed dogs for free-motion sewing, or raise them if they are lowered accidentally.
8. Uneven Stitch Length on the Husqvarna Viking Tribute 145C
- Description of the problem: Inconsistency in stitch length across the fabric.
- Cause of the problem: Improper adjustment of stitch length settings or mechanical issues.
- Troubleshooting step-by-step:
- Check the stitch length setting on the machine and adjust it as needed for the desired stitch length.
- Ensure there are no obstructions or jammed mechanisms in the stitch length adjustment mechanism.
- If the problem persists, consult the user manual for advanced troubleshooting or consider professional servicing.
9. Thread Breaking with the Husqvarna Viking Tribute 145C
- Description of the problem: Thread breaks frequently during sewing.
- Cause of the problem: Incorrect threading, tension issues, or sharp edges on the sewing machine components.
- Troubleshooting step-by-step:
- Check the threading of both the upper and lower threads, ensuring they follow the correct path.
- Adjust the tension settings to match the fabric and thread being used, avoiding excessive tension.
- Inspect the sewing machine components for any sharp edges or burrs that may be damaging the thread, and smooth them if necessary.
10. Jammed Needle Plate on the Husqvarna Viking Tribute 145C
- Description of the problem: Fabric gets stuck under the needle plate during sewing.
- Cause of the problem: Build-up of lint or debris, or misalignment of the needle plate.
- Troubleshooting step-by-step:
- Remove the needle plate and clean out any accumulated lint or debris from the feed dogs and surrounding area.
- Inspect the needle plate for any signs of damage or misalignment, and adjust or replace if necessary.
- Test sew on scrap fabric to ensure smooth fabric feeding and prevent further jamming.
11. Thread Cutter Not Functioning Properly on the Husqvarna Viking Tribute 145C
- Description of the problem: The built-in thread cutter does not cut the thread cleanly or consistently.
- Cause of the problem: Dull or misaligned thread cutter blade, or debris accumulation.
- Troubleshooting step-by-step:
- Inspect the thread cutter blade for any signs of dullness or damage, and replace if necessary.
- Clean the thread cutter area thoroughly to remove any lint or debris that may be obstructing the cutting mechanism.
- Ensure the thread cutter mechanism is properly aligned and lubricated for smooth operation.
12. Bobbin Winder Not Engaging Properly on the Husqvarna Viking Tribute 145C
- Description of the problem: The bobbin winder does not engage when attempting to wind a bobbin.
- Cause of the problem: Faulty bobbin winder mechanism or improper setup.
- Troubleshooting step-by-step:
- Check that the bobbin winder is correctly positioned and engaged with the machine.
- Inspect the bobbin winder mechanism for any signs of damage or obstruction, and repair or replace as needed.
- Ensure the machine is set to the correct bobbin winding mode and that all necessary settings are adjusted properly.
13. Thread Jamming in the Upper Thread Path on the Husqvarna Viking Tribute 145C
- Description of the problem: Thread gets stuck or tangled in the upper thread path during sewing.
- Cause of the problem: Improper threading, thread tension issues, or obstruction in the thread path.
- Troubleshooting step-by-step:
- Re-thread the upper thread, following the correct path as indicated in the machine’s manual.
- Check the tension settings and adjust them as necessary to prevent thread jamming.
- Inspect the upper thread path for any obstructions or tangled thread, and clear them out carefully.
14. Noisy Operation on the Husqvarna Viking Tribute 145C
- Description of the problem: The sewing machine produces excessive noise during operation.
- Cause of the problem: Loose components, lack of lubrication, or mechanical issues.
- Troubleshooting step-by-step:
- Check for any loose screws or parts on the machine and tighten them securely.
- Lubricate the moving parts of the machine according to the manufacturer’s recommendations.
- If the noise persists, inspect the internal mechanisms for any signs of wear or damage, and address them accordingly.
15. Needle Positioning Error on the Husqvarna Viking Tribute 145C
- Description of the problem: The needle does not stop in the correct position when sewing stops.
- Cause of the problem: Incorrect needle position settings or sensor malfunction.
- Troubleshooting step-by-step:
- Adjust the needle position settings in the machine’s menu or control panel, if available.
- Check for any sensor issues or malfunctions that may be causing incorrect needle positioning.
- If necessary, reset the machine to its default settings and recalibrate the needle positioning function.
Here you can find all the parts and accessories for the Husqvarna Viking Tribute 145C guaranteed to fit your sewing machine
16. Feed Dog Malfunction on the Husqvarna Viking Tribute 145C
- Description of the problem: The feed dogs fail to move the fabric properly during sewing.
- Cause of the problem: Jammed or damaged feed dog mechanism, or incorrect adjustment.
- Troubleshooting step-by-step:
- Inspect the feed dogs for any obstructions, such as lint or debris, and clean them thoroughly.
- Check for any signs of damage or wear on the feed dog mechanism, and repair or replace if necessary.
- Adjust the feed dog height or pressure according to the fabric being used, ensuring smooth fabric movement.
17. Stitch Selector Not Working Properly on the Husqvarna Viking Tribute 145C
- Description of the problem: The stitch selector dial or buttons do not change the stitch pattern as expected.
- Cause of the problem: Mechanical issues with the stitch selector mechanism or electronic malfunction.
- Troubleshooting step-by-step:
- Ensure the machine is set to the correct stitch selector mode and that the dial or buttons are functioning correctly.
- Check for any physical obstructions or damage to the stitch selector mechanism, and repair if necessary.
- If the issue persists, reset the machine to its default settings and perform a thorough test of the stitch selector functions.
18. Bobbin Case Jamming on the Husqvarna Viking Tribute 145C
- Description of the problem: The bobbin case gets stuck or jams during sewing.
- Cause of the problem: Debris accumulation in the bobbin case area, incorrect bobbin insertion, or damaged bobbin case.
- Troubleshooting step-by-step:
- Remove the bobbin case and clean out any lint or debris that may be causing the jamming.
- Check the bobbin insertion to ensure it is correctly seated and spinning freely in the bobbin case.
- If the problem persists, inspect the bobbin case for any signs of damage or wear, and replace if necessary.
19. Foot Pedal Not Responding on the Husqvarna Viking Tribute 145C
- Description of the problem: The foot pedal does not control the sewing machine speed or does not respond at all.
- Cause of the problem: Faulty foot pedal connection, damaged pedal mechanism, or electrical issues.
- Troubleshooting step-by-step:
- Check the connection between the foot pedal and the sewing machine, ensuring it is securely plugged in.
- Inspect the foot pedal for any signs of damage or wear, and test with a different pedal if available.
- If electrical issues are suspected, consult a professional technician for further diagnosis and repair.
20. Thread Cutter Not Retracting Properly on the Husqvarna Viking Tribute 145C
- Description of the problem: The automatic thread cutter fails to retract after use, causing thread waste or interference with sewing.
- Cause of the problem: Mechanical issues with the thread cutter mechanism or lack of lubrication.
- Troubleshooting step-by-step:
- Inspect the thread cutter mechanism for any obstructions or signs of damage, and clean or repair as needed.
- Lubricate the moving parts of the thread cutter according to the manufacturer’s recommendations.
- If the problem persists, consider disabling the automatic thread cutter function and using manual cutting until the issue is resolved.
21. Uneven Feed on the Husqvarna Viking Tribute 145C
- Description of the problem: The fabric is not fed evenly under the presser foot during sewing, resulting in uneven stitching.
- Cause of the problem: Misaligned presser foot, damaged feed dog, or incorrect presser foot pressure.
- Troubleshooting step-by-step:
- Check the alignment of the presser foot and adjust if necessary to ensure even pressure on the fabric.
- Inspect the feed dogs for any signs of damage or wear, and replace if necessary.
- Adjust the presser foot pressure according to the fabric being used to promote smooth and even feeding.
22. Stitch Skipping with the Husqvarna Viking Tribute 145C
- Description of the problem: The sewing machine occasionally skips stitches, leaving gaps in the stitching.
- Cause of the problem: Dull or damaged needle, incorrect needle size, or tension issues.
- Troubleshooting step-by-step:
- Replace the needle with a new, sharp needle suitable for the fabric being used.
- Ensure the needle is the correct size and type for the chosen fabric and thread.
- Adjust the tension settings to achieve balanced stitching and prevent skipping.
23. Bobbin Thread Not Catching on the Husqvarna Viking Tribute 145C
- Description of the problem: The upper thread fails to catch the bobbin thread, preventing proper stitching.
- Cause of the problem: Improper threading, bobbin insertion, or tension settings.
- Troubleshooting step-by-step:
- Re-thread the upper thread, ensuring it follows the correct path as per the machine’s manual.
- Check the bobbin insertion to ensure it is correctly seated and spinning in the bobbin case.
- Adjust the tension settings for both the upper and bobbin threads to achieve proper tension balance.
24. Stitch Length Variation on the Husqvarna Viking Tribute 145C
- Description of the problem: Inconsistent stitch lengths are observed across the fabric, affecting the overall appearance of the project.
- Cause of the problem: Incorrect stitch length setting, mechanical issues, or improper fabric handling.
- Troubleshooting step-by-step:
- Check the stitch length setting on the machine and adjust it to the desired length for the project.
- Inspect the machine for any signs of mechanical issues, such as jammed mechanisms or worn parts.
- Ensure smooth fabric handling during sewing to prevent variations in stitch length.
25. Thread Nesting Underneath the Fabric on the Husqvarna Viking Tribute 145C
- Description of the problem: The upper thread forms loops or nests underneath the fabric, resulting in messy stitching on the underside.
- Cause of the problem: Tension issues, incorrect threading, or sewing machine timing problems.
- Troubleshooting step-by-step:
- Check the tension settings for both the upper and bobbin threads and adjust them to achieve balanced tension.
- Re-thread the machine, ensuring the thread is properly seated in the tension disks and follows the correct path.
- If the problem persists, consult a professional technician to inspect and adjust the sewing machine’s timing.
Here you can find all the parts and accessories for the Husqvarna Viking Tribute 145C guaranteed to fit your sewing machine
Husqvarna Viking Tribute 145C Sewing Machine Manual
You can find the operating instructions for the Husqvarna Viking Tribute 145C sewing machine on the manufacturer’s website.
Husqvarna Viking Tribute 145C Frequently Asked Questions
1. How do I adjust the thread tension on the Husqvarna Viking Tribute 145C?
To adjust the thread tension on the Husqvarna Viking Tribute 145C, locate the tension dial on the machine and turn it clockwise to increase tension or counterclockwise to decrease tension. Test sew on a scrap fabric until the desired tension is achieved.
2. What should I do if my needle keeps breaking?
If your needle keeps breaking on the Husqvarna Viking Tribute 145C, first, ensure you are using the correct needle size and type for the fabric. Check for any signs of damage or bending on the needle, and replace it if necessary. Additionally, make sure the needle is inserted correctly and tightened securely in the machine.
3. How do I clean and maintain my Husqvarna Viking Tribute 145C?
To clean and maintain your Husqvarna Viking Tribute 145C, regularly remove lint and debris from the bobbin area and feed dogs using a brush or vacuum cleaner attachment. Lubricate the machine according to the manufacturer’s recommendations and keep it covered when not in use to prevent dust accumulation.
4. Why is my bobbin thread bunching up underneath the fabric?
If your bobbin thread is bunching up underneath the fabric on the Husqvarna Viking Tribute 145C, it may be due to incorrect bobbin threading or tension. Re-thread the bobbin following the machine’s manual and adjust the tension as needed. Also, ensure the bobbin is inserted correctly into the bobbin case.
5. How can I troubleshoot if my machine is not stitching properly?
If your Husqvarna Viking Tribute 145C is not stitching properly, first check the needle and thread to ensure they are compatible with the fabric. Then, re-thread the machine, ensuring the thread is properly seated in the tension disks and follows the correct path. Test sew on scrap fabric to check for proper stitching.
6. What should I do if my sewing machine is making unusual noises?
If your sewing machine is making unusual noises, it may indicate loose components or lack of lubrication. Check for any loose screws or parts on the machine and tighten them securely. Lubricate the moving parts according to the manufacturer’s recommendations to reduce friction and noise.
7. How do I troubleshoot if my machine is not turning on?
If your Husqvarna Viking Tribute 145C is not turning on, check the power cord and ensure it is securely plugged into a working outlet. Inspect the power switch for any damage or signs of malfunction, and replace if necessary. If available, test the machine with a different power cord to rule out a faulty cord.
Conclusion
Always refer to the manual, customer service, or service center whenever possible if there is a problem with your Husqvarna Viking Tribute 145C sewing machine.
Husqvarna Viking Tribute 140M Common Problems