Husqvarna Viking Tribute 145M Common Problems and Troubleshooting
The Husqvarna Viking Tribute 145M sewing machine is a beloved companion for many sewing enthusiasts, renowned for its durability, versatility, and precision stitching capabilities. However, like any mechanical device, it may encounter occasional issues that can disrupt the sewing process.
In this article, we delve into some of the common problems faced by users of the Husqvarna Viking Tribute 145M and provide troubleshooting tips to help you address these issues effectively.
Whether you’re a seasoned seamstress or a novice crafter, understanding how to troubleshoot these common issues will ensure that your sewing experience remains smooth and enjoyable.
Here you can find all the parts and accessories for the Husqvarna Viking Tribute 145M guaranteed to fit your sewing machine
Common Problems and Troubleshooting for Husqvarna Viking Tribute 145M
1. Needle Breakage
Description: The needle frequently breaks during sewing.
Cause: Incorrect needle installation, using the wrong needle type or size, or sewing with damaged or bent needles.
Troubleshooting:
- Ensure the needle is installed correctly, with the flat side facing back.
- Use the appropriate needle type and size for the fabric being sewn.
- Replace the needle if it is damaged or bent.
2. Thread Tension Issues
Description: Uneven or loose stitches, or thread bunching on the fabric surface.
Cause: Incorrect threading, incorrect tension settings, or debris in the tension discs.
Troubleshooting:
- Re-thread the machine, ensuring the thread is correctly guided through all threading points.
- Adjust the tension settings according to the fabric and thread being used.
- Clean the tension discs to remove any debris.
3. Bobbin Jamming
Description: The bobbin gets stuck or jams while sewing.
Cause: Improperly wound or inserted bobbin, or debris in the bobbin area.
Troubleshooting:
- Ensure the bobbin is correctly wound and inserted into the bobbin case.
- Clean the bobbin area to remove any lint or debris.
- Check for any burrs or rough spots on the bobbin case that may be causing the jamming.
4. Feed Dog Malfunction
Description: The feed dogs fail to move the fabric or do not feed it evenly.
Cause: Dirt buildup or mechanical issues with the feed dog mechanism.
Troubleshooting:
- Clean the feed dogs to remove any dirt or lint accumulation.
- Check for any obstructions or damage to the feed dog mechanism.
- Oil or lubricate the feed dog mechanism if necessary, following the manufacturer’s instructions.
5. Machine Not Powering On
Description: The sewing machine does not turn on or respond to power.
Cause: Power cord issues, faulty power switch, or internal electrical problems.
Troubleshooting:
- Check the power cord for any damage or loose connections.
- Ensure the power switch is in the ON position.
- If the machine still does not power on, consult a qualified technician for further diagnosis and repair.
6. Uneven Stitching
Description: The stitches produced by the machine are uneven in length or tension.
Cause: Improper threading, incorrect needle size, or worn-out presser foot.
Troubleshooting:
- Re-thread the machine, ensuring proper threading through all guides and tension disks.
- Check that the needle size matches the fabric weight and type.
- Inspect the presser foot for signs of wear and replace if necessary.
7. Loud or Unusual Noise
Description: The sewing machine emits loud or strange noises during operation.
Cause: Loose screws, worn-out parts, or debris stuck in the machine.
Troubleshooting:
- Tighten any loose screws or bolts on the machine.
- Inspect internal parts for signs of wear and replace if necessary.
- Clear any debris or lint buildup from the machine’s interior.
8. Fabric Puckering
Description: The fabric puckers or gathers excessively while sewing.
Cause: Incorrect tension settings, using the wrong needle type, or improper presser foot pressure.
Troubleshooting:
- Adjust the tension settings to achieve the correct balance for the fabric being sewn.
- Ensure the needle type and size are appropriate for the fabric.
- Adjust the presser foot pressure according to the fabric thickness.
9. Thread Snapping
Description: The thread frequently breaks while sewing.
Cause: Tension issues, blunt or damaged needle, or rough edges on the needle plate.
Troubleshooting:
- Check and adjust the tension settings as needed.
- Replace the needle with a new, sharp one.
- Smooth any rough edges on the needle plate with fine sandpaper.
10. Bobbin Thread Showing on Top
Description: The bobbin thread appears on the top side of the fabric.
Cause: Incorrect bobbin threading, tension issues, or improper bobbin insertion.
Troubleshooting:
- Re-thread the bobbin, ensuring it is correctly inserted into the bobbin case.
- Check and adjust the tension settings if necessary.
- Ensure the bobbin is wound evenly and inserted with the correct orientation.
11. Stitch Skipping
Description: The machine occasionally skips stitches while sewing.
Cause: Dull or incorrectly inserted needle, improper thread tension, or machine misalignment.
Troubleshooting:
- Replace the needle with a new, sharp one, ensuring it is inserted correctly.
- Adjust the thread tension to achieve balanced stitches.
- Check and realign the needle and bobbin mechanisms if necessary.
12. Thread Bunching Underneath
Description: The thread gathers or bunches underneath the fabric.
Cause: Improper bobbin tension, incorrect threading, or debris in the bobbin area.
Troubleshooting:
- Adjust the bobbin tension screw to achieve the correct tension.
- Re-thread the bobbin and ensure it is correctly seated in the bobbin case.
- Clean the bobbin area to remove any lint or debris that may be causing the issue.
13. Uneven Feed
Description: The fabric does not feed evenly, causing uneven stitching.
Cause: Dirty or worn feed dogs, incorrect presser foot pressure, or feed dog height adjustment issues.
Troubleshooting:
- Clean the feed dogs to remove any dirt or lint buildup.
- Adjust the presser foot pressure to ensure proper fabric feeding.
- Check and adjust the feed dog height according to the fabric thickness.
14. Jammed Needle Plate
Description: The needle plate becomes jammed or difficult to remove.
Cause: Accumulation of lint or debris, improper installation, or mechanical issues.
Troubleshooting:
- Clean the needle plate area thoroughly to remove any lint or debris.
- Ensure the needle plate is installed correctly and securely.
- If the issue persists, inspect the machine for any mechanical problems and seek professional assistance if needed.
15. Bobbin Winding Problems
Description: Issues arise while winding the bobbin, such as uneven winding or bobbin slipping.
Cause: Improper bobbin placement, tension adjustment issues, or worn bobbin winding mechanism.
Troubleshooting:
- Ensure the bobbin is placed securely on the winding spindle.
- Check and adjust the bobbin tension as needed.
- If problems persist, inspect the bobbin winding mechanism for wear and consider lubrication or replacement.
16. Bobbin Thread Tangling
Description: The bobbin thread becomes tangled or knotted during sewing.
Cause: Incorrect bobbin threading, bobbin tension issues, or rough edges on the bobbin case.
Troubleshooting:
- Re-thread the bobbin, ensuring it follows the correct path and is properly seated.
- Adjust the bobbin tension to achieve balanced thread tension.
- Smooth any rough edges on the bobbin case with fine sandpaper.
17. Inconsistent Stitch Length
Description: The length of stitches varies unpredictably while sewing.
Cause: Uneven tension, worn-out feed dogs, or inconsistent presser foot pressure.
Troubleshooting:
- Check and adjust the tension settings to achieve uniform stitch length.
- Inspect the feed dogs for wear and replace if necessary.
- Ensure consistent presser foot pressure across the fabric.
18. Thread Fraying
Description: The thread frays or shreds while sewing, leading to weakened stitches.
Cause: Dull or damaged needle, improper thread tension, or using low-quality thread.
Troubleshooting:
- Replace the needle with a new, sharp one suitable for the fabric.
- Adjust the thread tension to prevent excessive thread pull and fraying.
- Use high-quality thread appropriate for the fabric being sewn.
19. Needle Plate Scratches
Description: Scratches or marks appear on the needle plate surface.
Cause: Sewing over pins, using incorrect needle plate, or debris trapped between fabric and needle plate.
Troubleshooting:
- Avoid sewing over pins to prevent damage to the needle plate surface.
- Ensure using the correct needle plate for the selected stitch.
- Regularly clean the needle plate area to prevent debris buildup.
20. Thread Cutter Malfunction
Description: The built-in thread cutter fails to cut the thread cleanly or consistently.
Cause: Dull or misaligned thread cutter blade, thread buildup, or mechanical issues.
Troubleshooting:
- Inspect and replace the thread cutter blade if it appears dull or damaged.
- Clean any accumulated thread or debris from the thread cutter area.
- Check for any mechanical issues with the thread cutter mechanism and seek professional assistance if needed.
21. Thread Knots on the Underside
Description: Knots or tangles of thread appear on the underside of the fabric.
Cause: Incorrect bobbin tension, improper threading, or debris in the bobbin case.
Troubleshooting:
- Adjust the bobbin tension to achieve a balanced thread tension.
- Re-thread the bobbin, ensuring it follows the correct path and is properly seated.
- Clean the bobbin case to remove any debris or lint buildup.
22. Fabric Slippage
Description: The fabric slips or shifts while sewing, resulting in uneven stitches.
Cause: Incorrect presser foot pressure, inadequate fabric grip, or machine misalignment.
Troubleshooting:
- Adjust the presser foot pressure to ensure proper fabric grip.
- Use a presser foot with a more suitable design for the fabric type.
- Check and realign the machine components if slippage persists.
23. Thread Jamming in Bobbin Case
Description: The thread gets stuck or jams inside the bobbin case during sewing.
Cause: Incorrect bobbin threading, debris in the bobbin case, or damaged bobbin case.
Troubleshooting:
- Re-thread the bobbin, ensuring it follows the correct path and is properly wound.
- Clean the bobbin case thoroughly to remove any lint or debris.
- Inspect the bobbin case for any signs of damage and replace if necessary.
24. Needle Plate Misalignment
Description: The needle plate becomes misaligned or shifts during sewing.
Cause: Loose screws, improper installation, or machine vibrations.
Troubleshooting:
- Tighten any loose screws or bolts securing the needle plate.
- Ensure the needle plate is installed correctly and securely.
- Place the machine on a stable surface to minimize vibrations.
25. Thread Tension Discs Malfunction
Description: The thread tension discs fail to adjust properly, leading to inconsistent tension.
Cause: Dirt or debris buildup, worn tension discs, or mechanical issues.
Troubleshooting:
- Clean the tension discs to remove any accumulated dirt or debris.
- Inspect the tension discs for signs of wear and replace if necessary.
- Check for any mechanical issues with the tension adjustment mechanism and seek professional assistance if needed.
Here you can find all the parts and accessories for the Husqvarna Viking Tribute 145M guaranteed to fit your sewing machine
Husqvarna Viking Tribute 145M Sewing Machine Manual
The operating instructions for the Husqvarna Viking Tribute 145M sewing machine can be found on the manufacturer’s website. Please visit the official Husqvarna Viking website and navigate to the support or downloads section to locate the manual for your specific model.
Husqvarna Viking Tribute 145M Frequently Asked Questions
1. How can I troubleshoot thread tension issues with my Husqvarna Viking Tribute 145M?
To troubleshoot thread tension issues, ensure that the machine is threaded correctly, use the appropriate thread and needle for the fabric, and adjust the tension settings according to the user manual’s instructions.
2. Why does my Husqvarna Viking Tribute 145M sewing machine needle keep breaking?
Needle breakage can occur due to several reasons such as using the wrong needle size or type, incorrect threading, or sewing over pins. Ensure that the needle is inserted correctly and that it is compatible with the fabric being sewn.
3. What should I do if my Husqvarna Viking Tribute 145M machine is not picking up the bobbin thread?
If the machine is not picking up the bobbin thread, check that the bobbin is inserted correctly, the needle is installed properly, and the machine is threaded correctly. Additionally, ensure that the bobbin tension is adjusted appropriately.
4. How can I prevent fabric puckering while using my Husqvarna Viking Tribute 145M?
To prevent fabric puckering, use the appropriate needle and thread for the fabric, adjust the tension settings, and ensure that the presser foot pressure is set correctly. Additionally, avoid pulling the fabric while sewing.
5. What should I do if my Husqvarna Viking Tribute 145M sewing machine is making loud noises?
Loud noises from the sewing machine may indicate loose screws, worn-out parts, or debris trapped in the machine. Check for any loose screws, clean the machine, and if the issue persists, consult a professional technician for further inspection and repair.
Conclusion
It is advisable for users to always refer to the manual, customer service, or service center whenever possible if there is a problem with their Husqvarna Viking Tribute 145M sewing machine. Proper troubleshooting and maintenance can help resolve common issues and ensure optimal performance.
Husqvarna Viking Tribute 145C Common Problems