Solving Jamming Problems with the Janome Sewing Machine

Are you having trouble with your JANOME Sewing Machine? Does it keep jamming? If so, you are not alone. Many people have experienced this same issue and have been searching for solutions. In this article, we will discuss the common causes of JANOME Sewing Machine jamming problems and provide tips on how to fix them.

Common Causes of Janome Sewing Machine Keep Jamming Problems

Incorrect needle size

Needle not inserted correctly
Thread tension too tight

Bobbin not inserted correctly
Bobbin tension too tight
Thread not properly guided through machine

Poor quality thread
Poor quality needle
Machine not properly lubricated

Machine not properly serviced or maintained (specifically for Janome machines)

Causes of JANOME Sewing Machine Keep Jamming Problems

This article will provide an in-depth look at the causes of JANOME sewing machine jamming problems and provide detailed instructions on how to fix them. It will cover topics such as thread tension, needle size, fabric type, and more. By the end of this article, you will have the knowledge and tools to troubleshoot and fix any jamming issues you may have with your JANOME sewing machine.

Incorrect Needle Size

Using the wrong size needle for your sewing project can cause a variety of problems, from skipped stitches to broken needles. It is important to select the correct needle size for the fabric and thread you are using. If you are using a Janome sewing machine, there are a few steps you can take to ensure you are using the correct needle size.

Examples of Incorrect Needle Size

Using a needle that is too small for the fabric and thread you are using.
Using a needle that is too large for the fabric and thread you are using.

Using a needle that is not designed for the type of fabric you are using.

Step-by-Step Instructions for Fixing Incorrect Needle Size on a Janome Sewing Machine

Check the needle size. Janome sewing machines have a needle size indicator on the needle plate. This will tell you the size of the needle you are currently using.
Check the fabric and thread you are using. Different fabrics and threads require different needle sizes. Refer to the Janome needle chart to determine the correct needle size for your fabric and thread.

Remove the old needle. To remove the old needle, turn the hand wheel towards you until the needle is at its highest point. Then, press the needle clamp lever down and remove the needle.
Insert the new needle. Insert the new needle with the flat side facing towards the back of the machine. Push the needle up as far as it will go and then tighten the needle clamp lever.
Check the needle size. Turn the hand wheel towards you until the needle is at its highest point. Check the

Needle Not Inserted Correctly on a Janome Sewing Machine

When using a Janome sewing machine, it is important to ensure that the needle is inserted correctly. If the needle is not inserted correctly, it can cause a variety of problems, such as skipped stitches, uneven stitches, and fabric puckering. Fortunately, it is easy to fix this issue.

Step-by-Step Instructions

Turn off the machine and unplug it from the power source.
Remove the needle plate cover.
Loosen the needle clamp screw and remove the needle.

Check the needle for any signs of damage or wear.
If the needle is damaged, replace it with a new one.
Insert the needle into the needle clamp with the flat side of the needle facing the back of the machine.

Tighten the needle clamp screw.
Replace the needle plate cover.
Plug the machine back into the power source and turn it on.

Examples of Problems Caused by an Incorrectly Inserted Needle

Skipped stitches
Uneven stitches
Fabric puckering

Thread bunching
Needle breaking

By following the steps above, you can ensure that your Janome sewing machine needle is inserted correctly and avoid any of the problems listed above.

Thread Tension Too Tight on Janome Sewing Machines

Having the thread tension too tight on a Janome sewing machine can cause a variety of problems, including skipped stitches, uneven stitches, and thread breakage. Fortunately, it is relatively easy to adjust the tension on a Janome sewing machine. Here are the steps to follow to adjust the thread tension on a Janome sewing machine.

Step 1: Locate the Thread Tension Dial

The thread tension dial is usually located on the top of the machine, near the needle. It is usually marked with a number from 0 to 9, with 0 being the loosest tension and 9 being the tightest.

Step 2: Adjust the Thread Tension Dial

To adjust the thread tension, turn the dial to the left to loosen the tension, or to the right to tighten the tension. Start by turning the dial to the left until the tension is at a 4 or 5. If the tension is still too tight, continue to turn the dial to the left until the tension is correct.

Step 3: Test the Tension

Once the tension has been adjusted, it is important to test it to make sure it is correct. To do this, sew a few stitches on a scrap piece of fabric. If the stitches look even and the thread does not break, the tension is correct. If the stitches are uneven or the thread breaks, the tension needs to be adjusted further.

Step 4: Repeat as Necessary

If the tension is still not correct after adjusting the dial, repeat steps 2 and 3 until the tension is correct. It may take a few tries to get the tension just right.

Bobbin Not Inserted Correctly

When a bobbin is not inserted correctly into a JANOME sewing machine, it can cause a variety of problems. The most common issue is that the machine will not sew properly, as the thread will not be pulled up correctly. This can lead to skipped stitches, uneven tension, and other issues. Fortunately, it is relatively easy to fix this problem.

Examples of Bobbin Not Inserted Correctly

Thread not being pulled up correctly

Skipped stitches
Uneven tension
Machine not sewing properly

Step-by-Step Instructions for Fixing Bobbin Not Inserted Correctly on a JANOME Sewing Machine

Unplug the machine from the power source.
Open the bobbin case by pressing the latch on the side of the machine.
Remove the bobbin from the case.

Check the bobbin to make sure it is inserted correctly. The thread should be wound in a clockwise direction and the thread should be coming off the top of the bobbin.
If the bobbin is not inserted correctly, rewind the thread in the correct direction.
Reinsert the bobbin into the case, making sure it is inserted correctly.

Close the bobbin case and plug the machine back into the power source.
Test the machine to make sure it is sewing correctly.

Bobbin Tension Too Tight: How to Fix It with a Janome Sewing Machine

Bobbin tension that is too tight can cause a variety of problems with your Janome sewing machine. It can cause thread to break, stitches to be uneven, and fabric to pucker. Fortunately, it is relatively easy to adjust the bobbin tension on a Janome sewing machine. Here are the steps to follow:

Step 1: Check the Bobbin Tension

The first step is to check the bobbin tension. To do this, remove the bobbin case from the machine and hold it so that the bobbin is facing up. Then, pull the thread lightly and see if the bobbin case moves. If it does, the tension is too tight and needs to be adjusted.

Step 2: Adjust the Bobbin Tension

Once you have determined that the bobbin tension is too tight, you can adjust it. To do this, locate the tension screw on the bobbin case. It is usually located on the side of the bobbin case. Then, use a small screwdriver to turn the screw counterclockwise. This will loosen the tension and make it easier for the thread to pass through the bobbin case.

Step 3: Test the Bobbin Tension

Once you have adjusted the bobbin tension, it is important to test it to make sure it is not too loose. To do this, reinsert the bobbin case into the machine and pull the thread lightly. If the bobbin case moves, the tension is still too tight and you will need to adjust it again. If the bobbin case does not move, the tension is just right.

Step 4: Sew a Test Stitch

Thread Not Properly Guided Through Machine: Thread not properly guided through a machine is a common problem that can occur when using a sewing machine. This issue can cause the thread to become tangled, knotted, or even break. Fortunately, this issue can be easily fixed with the right tools and techniques.

Examples of Thread Not Properly Guided Through Machine:

Thread becoming tangled or knotted

Thread breaking
Thread not feeding through the machine properly

Step-by-Step Instructions for Fixing Thread Not Properly Guided Through Machine Using JANOME:

Check the tension of the thread. If the tension is too tight, the thread may not be able to feed through the machine properly. Adjust the tension as needed.

Check the thread path. Make sure the thread is properly guided through the machine. If the thread is not properly guided, it may become tangled or knotted.
Check the needle. Make sure the needle is the correct size and type for the thread being used. If the needle is too small, the thread may not be able to pass through the eye of the needle.
Check the bobbin. Make sure the bobbin is properly wound and that the thread is properly guided through the bobbin case. If the bobbin is not properly wound, the thread may become tangled or knotted.

Check the presser foot. Make sure the presser foot is properly adjusted and that the thread is properly guided through the presser foot. If the presser foot is not properly adjusted, the thread may become tangled or knotted.
Check the thread

Poor Quality Thread

Poor quality thread can be a major issue when it comes to sewing. It can cause a variety of problems, such as skipped stitches, broken threads, and uneven tension. Fortunately, there are a few steps you can take to fix this issue and get your sewing project back on track.

Examples of Poor Quality Thread

Thread that is too thick or too thin for the fabric

Thread that is too stiff or too soft
Thread that is too old or has been exposed to too much heat or light
Thread that is not colorfast

How to Fix Poor Quality Thread with a JANOME Sewing Machine

If you are using a JANOME sewing machine, there are a few steps you can take to fix poor quality thread. Follow these steps to get your sewing project back on track:

Check the thread for any signs of damage. If the thread is frayed, discolored, or otherwise damaged, it is best to replace it with a new spool of thread.
Check the tension on the sewing machine. If the tension is too tight or too loose, it can cause skipped stitches and other problems. Adjust the tension according to the instructions in your JANOME sewing machine manual.
Check the needle. If the needle is bent, dull, or otherwise damaged, it can cause skipped stitches and other problems. Replace the needle with a new one that is the correct size and type for the fabric you are using.

Check the bobbin. If the bobbin is not wound correctly, it can cause skipped stitches and other problems.

Poor Quality Needle

A poor quality needle can cause a variety of problems when sewing, including skipped stitches, broken threads, and uneven stitches. It is important to use the correct needle for the fabric and thread being used, as well as to regularly replace the needle to ensure the best results. If you are using a JANOME sewing machine, here are some steps to help you fix a poor quality needle.

Steps to Fix a Poor Quality Needle on a JANOME Sewing Machine

Turn off the power switch and unplug the machine.
Remove the needle plate by loosening the two screws on the side of the machine.

Remove the needle by loosening the needle clamp screw.
Check the needle for any signs of wear or damage, such as a bent shaft or a dull point.
If the needle is damaged, replace it with a new one.

Make sure the needle is the correct size and type for the fabric and thread being used.
Insert the needle into the needle clamp and tighten the needle clamp screw.
Replace the needle plate and tighten the two screws.

Plug in the machine and turn on the power switch.

By following these steps, you can easily fix a poor quality needle on a JANOME sewing machine. Remember to always use the correct needle for the fabric and thread being used, and to regularly replace the needle to ensure the best results.

Machine Not Properly Lubricated

When a machine is not properly lubricated, it can cause a variety of problems. Poor lubrication can lead to increased friction, which can cause the machine to wear out faster, and can even cause it to break down. In order to keep your machine running smoothly, it is important to make sure it is properly lubricated.

Examples of Poor Lubrication

Excessive wear on moving parts
Increased noise from the machine

Reduced performance
Increased heat from the machine

Step-by-Step Instructions for Lubricating a JANOME Sewing Machine

Unplug the machine from the power source.

Remove the needle plate and bobbin case.
Clean the bobbin case and needle plate with a soft cloth.
Apply a few drops of JANOME sewing machine oil to the bobbin case and needle plate.

Replace the bobbin case and needle plate.
Plug the machine back into the power source.
Run the machine for a few minutes to allow the oil to spread.

By following these steps, you can ensure that your JANOME sewing machine is properly lubricated and running smoothly. Proper lubrication is essential for keeping your machine in good working condition and preventing it from breaking down.

Machine Not Properly Serviced or Maintained

When a machine is not properly serviced or maintained, it can lead to a variety of problems. This can include decreased performance, increased noise, and even complete breakdowns. In order to ensure that your machine is running smoothly and efficiently, it is important to regularly service and maintain it. Here, we will discuss how to properly service and maintain a JANOME sewing machine.

Examples of Poor Maintenance

Not cleaning the machine regularly
Not lubricating the machine regularly
Not replacing worn or broken parts

Not checking for loose screws or bolts
Not checking for frayed or worn out threads

Step-by-Step Instructions for Servicing and Maintaining a JANOME Sewing Machine

Unplug the machine from the power source.

Remove the bobbin case and clean it with a soft cloth.
Clean the feed dogs with a soft cloth.
Lubricate the machine with a light machine oil.

Check for any loose screws or bolts and tighten them if necessary.
Check for any frayed or worn out threads and replace them if necessary.
Check the tension of the machine and adjust it if necessary.

Replace any worn or broken parts.
Plug the machine back into the power source.

By following these steps, you can ensure that your JANOME sewing machine is properly serviced and

Tips for Preventing Upper Thread Breaking Problems with JANOME Sewing Machines

Upper thread breaking problems can be a common issue when using a JANOME sewing machine. Fortunately, there are a few simple steps you can take to help prevent these problems from occurring.

Maintaining Your Machine

Regularly clean and oil your machine according to the manufacturer’s instructions.

Check the tension of the upper thread and adjust it as needed.
Replace the needle regularly, as a dull or bent needle can cause thread breakage.
Check the bobbin case for any lint or debris that may be causing the thread to break.

Using Your Machine

Use the correct type and size of thread for your project.
Make sure the thread is properly loaded in the machine.
Avoid sewing too quickly, as this can cause the thread to break.

Be sure to use the correct presser foot for the type of fabric you are working with.

By following these simple tips, you can help ensure that your JANOME sewing machine runs smoothly and that you don’t experience any upper thread breaking problems.

10 Common Problems with JANOME Sewing Machines

In addition to the common problems listed above, JANOME sewing machines can also experience the following issues:

Stitch Problems
Sewing Machine Parts Problems

Tension problems
Sewing machine not feeding fabric

FAQ

What is Keep Jamming?

Keep Jamming is a feature on JANOME sewing machines that allows you to keep sewing even when the machine jams. It is designed to help you keep sewing without having to stop and unjam the machine.

What causes a sewing machine to jam?

Sewing machine jams can be caused by a variety of factors, including incorrect threading, incorrect tension settings, incorrect needle size, incorrect fabric type, or incorrect stitch length.

How do I use the Keep Jamming feature?

To use the Keep Jamming feature, simply press the Keep Jamming button on your JANOME sewing machine. This will allow you to keep sewing even when the machine jams.

What should I do if the Keep Jamming feature doesn’t work?

If the Keep Jamming feature doesn’t work, you should first check to make sure that the machine is properly threaded and that the tension settings are correct. If these are correct, then you should check the needle size, fabric type, and stitch length to make sure they are correct. If these are all correct, then you should contact JANOME customer service for further assistance.

Conclusion

In conclusion, Janome sewing machines can be prone to jamming problems. However, with the right maintenance and troubleshooting techniques, these issues can be easily resolved. Regularly cleaning and oiling the machine, as well as checking the tension and needle size, can help to prevent jamming. If the machine does jam, it is important to identify the cause and take the necessary steps to fix it. With the right care and attention, Janome sewing machines can provide years of reliable service.