Solving Tension Problems with a Janome Sewing Machine

Having trouble with your JANOME sewing machine tension? You’re not alone. Many sewers have experienced tension issues with their JANOME machines, and it can be a frustrating problem to solve. Fortunately, there are a few steps you can take to troubleshoot and fix the tension on your JANOME sewing machine.

Common Causes of Janome Sewing Machine Tension Problems

Incorrect thread tension

Needle size not suitable for fabric
Bobbin thread not properly wound

Needle not inserted correctly
Thread not properly threaded through Janome machine
Needle not properly positioned in the needle plate

Incorrect stitch length setting
Incorrect presser foot pressure
Machine not properly lubricated

Machine not properly serviced or maintained

Troubleshooting JANOME Sewing Machine Tension Problems

This section will provide an overview of the common causes of tension problems with JANOME sewing machines, as well as how to troubleshoot them. We will discuss the importance of thread tension, how to adjust it, and how to identify and resolve common tension issues.

Incorrect Thread Tension on Janome Sewing Machines

Incorrect thread tension is one of the most common problems encountered when using a Janome sewing machine. If the tension is too tight, the thread will be pulled too tightly and the stitches will be too tight. If the tension is too loose, the thread will be pulled too loosely and the stitches will be too loose. In either case, the stitches will be uneven and the fabric will not be properly secured.

Examples of Incorrect Thread Tension

The thread is pulled too tightly, resulting in tight, uneven stitches.
The thread is pulled too loosely, resulting in loose, uneven stitches.

The thread is pulled unevenly, resulting in uneven stitches.

Step-by-Step Instructions for Fixing Incorrect Thread Tension on Janome Sewing Machines

Turn the hand wheel on the right side of the machine until the needle is in its highest position.
Locate the tension dial on the front of the machine. It is usually located near the needle.

Turn the tension dial to the left to loosen the tension or to the right to tighten the tension.
Test the tension by sewing a few stitches on a scrap piece of fabric.
If the stitches are too tight, turn the tension dial to the left to loosen the tension. If the stitches are too loose, turn the tension dial to the right to tighten the tension.

Continue to adjust the tension dial until the stitches are even and the fabric is properly secured.

Needle Size Not Suitable for Fabric

Using the wrong needle size for a particular fabric can cause a variety of problems, from skipped stitches to broken needles. It is important to select the correct needle size for the fabric you are working with in order to ensure a successful sewing project.

What is the Right Needle Size?

The right needle size for a particular fabric depends on the weight of the fabric. Generally, the heavier the fabric, the larger the needle size should be. For example, a lightweight fabric such as chiffon would require a smaller needle size than a heavier fabric such as denim.

What Happens if the Wrong Needle Size is Used?

Using the wrong needle size can cause a variety of problems. If the needle is too small, it can cause skipped stitches, broken needles, and fabric puckering. If the needle is too large, it can cause holes in the fabric, skipped stitches, and fabric shredding.

How to Fix it with a Janome Sewing Machine

If you are using a Janome sewing machine, you can easily fix the problem of using the wrong needle size. Here are the steps to follow:

Turn off the machine and unplug it.
Remove the needle from the machine.

Check the size of the needle and make sure it is the correct size for the fabric you are working with.
If the needle is the wrong size, replace it with the correct size.
Re-insert the needle into the machine.

Plug in the machine and turn it on.
Test the machine.

Bobbin Thread Not Properly Wound on Janome Sewing Machines

Bobbin thread not properly wound is a common issue that can occur on Janome sewing machines. This issue can cause skipped stitches, uneven tension, and other problems with the sewing machine. Fortunately, it is relatively easy to fix. In this article, we will discuss the causes of bobbin thread not properly wound, how to identify the issue, and how to fix it.

Causes of Bobbin Thread Not Properly Wound

Bobbin thread not properly wound can be caused by a few different things. The most common cause is when the bobbin is not wound evenly. This can happen if the bobbin is wound too quickly or if the bobbin is not wound in the correct direction. Additionally, the bobbin thread can become tangled if the bobbin is not inserted correctly into the bobbin case.

How to Identify Bobbin Thread Not Properly Wound

If the bobbin thread is not properly wound, it can be identified by looking at the stitches on the fabric. If the stitches are uneven or skipped, it is likely that the bobbin thread is not properly wound. Additionally, if the bobbin thread is visible on the top of the fabric, it is a sign that the bobbin thread is not properly wound.

How to Fix Bobbin Thread Not Properly Wound on Janome Sewing Machines

Fixing bobbin thread not properly wound on Janome sewing machines is relatively easy. Follow these steps to fix the issue:

Remove the bobbin case from the sewing machine.

Remove the bobbin from the bobbin case.
Wind the bobbin evenly and in the

Needle Not Inserted Correctly

When a needle is not inserted correctly into a sewing machine, it can cause a variety of problems. The most common issue is that the machine will not sew properly, resulting in skipped stitches, uneven seams, and other issues. Fortunately, it is relatively easy to fix this problem.

Examples of Needle Not Inserted Correctly

The needle is not inserted all the way into the needle clamp.

The needle is inserted at an angle.
The needle is not inserted in the correct direction.
The needle is not the correct size for the machine.

Step-by-Step Instructions for Fixing Needle Not Inserted Correctly on a JANOME Sewing Machine

Turn off the machine and unplug it from the power source.
Remove the needle from the machine.
Check the needle size and type to make sure it is the correct one for your JANOME machine.

Insert the needle into the needle clamp, making sure it is inserted all the way and in the correct direction.
Tighten the needle clamp screw securely.
Plug the machine back in and turn it on.

Test the machine to make sure it is sewing properly.

By following these steps, you should be able to fix the problem of a needle not inserted correctly on a JANOME sewing machine.

Thread Not Properly Threaded Through Machine

Threading a sewing machine correctly is essential for successful sewing. If the thread is not properly threaded through the machine, it can cause skipped stitches, tension problems, and other issues. Fortunately, it is easy to fix this problem with a few simple steps.

Examples of Thread Not Properly Threaded Through Machine

Thread is not coming through the needle.
Thread is not coming through the tension discs.

Thread is not coming through the take-up lever.
Thread is not coming through the bobbin case.

Step-by-Step Instructions for Fixing Thread Not Properly Threaded Through Machine (Using JANOME)

Unplug the machine and raise the presser foot.

Remove the spool of thread from the spool pin and thread the thread through the thread guide.
Thread the thread through the take-up lever and the tension discs.
Thread the thread through the needle from front to back.

Lower the presser foot and pull the thread to the back of the machine.
Open the bobbin case and insert the bobbin, making sure the thread is coming off the bobbin in a counter-clockwise direction.
Pull the thread through the slot in the bobbin case and close the bobbin case.

Pull the thread up to the top of the machine and hold the thread with your left hand.
Turn the hand wheel towards you with your right hand until the needle is at its highest point

Needle Not Properly Positioned in the Needle Plate

When the needle is not properly positioned in the needle plate of a JANOME sewing machine, it can cause a variety of problems. These include skipped stitches, uneven stitches, and fabric puckering. Fortunately, this issue is relatively easy to fix.

Examples of Needle Not Properly Positioned in the Needle Plate

Needle is not inserted all the way into the needle plate.

Needle is inserted at an angle.
Needle is not inserted in the correct position.

Step-by-Step Instructions for Fixing Needle Not Properly Positioned in the Needle Plate

Turn off the power switch and unplug the machine.

Remove the needle plate by loosening the screw on the side of the machine.
Remove the needle and check that it is the correct size and type for the fabric you are sewing.
Insert the needle into the needle plate, making sure it is inserted all the way and in the correct position.

Tighten the screw on the side of the machine to secure the needle plate.
Turn on the power switch and test the machine.

By following these steps, you should be able to fix the issue of the needle not being properly positioned in the needle plate of your JANOME sewing machine.

Incorrect Stitch Length Setting

When using a sewing machine, it is important to set the stitch length correctly. An incorrect stitch length setting can cause a variety of problems, such as uneven stitches, skipped stitches, and fabric puckering. Fortunately, it is easy to adjust the stitch length on most sewing machines, including Janome models.

Examples of Incorrect Stitch Length Setting

Uneven stitches

Skipped stitches
Fabric puckering

Step-by-Step Instructions for Adjusting Stitch Length on Janome Sewing Machines

Turn the power switch to the “off” position.

Locate the stitch length dial on the front of the machine. It is usually located near the needle.
Turn the dial to the desired stitch length. The stitch length is measured in millimeters. For most fabrics, a stitch length of 2.5 to 3.5 millimeters is recommended.
Turn the power switch to the “on” position.

Test the stitch length by sewing a few stitches on a scrap of fabric.
If the stitch length is still incorrect, repeat steps 1-5.

By following these simple steps, you can easily adjust the stitch length on your Janome sewing machine. With the correct stitch length setting, you can achieve beautiful, even stitches every time.

Incorrect Presser Foot Pressure

Presser foot pressure is an important factor in achieving successful sewing results. If the pressure is too low, the fabric may not feed properly, resulting in uneven stitches or skipped stitches. If the pressure is too high, the fabric may be stretched or distorted, resulting in puckering or other problems. Incorrect presser foot pressure can be easily fixed with the right tools and techniques.

Examples of Incorrect Presser Foot Pressure

Fabric not feeding properly

Uneven stitches
Skipped stitches
Fabric stretched or distorted

Puckering

How to Fix Incorrect Presser Foot Pressure on a JANOME Sewing Machine

The following steps will help you adjust the presser foot pressure on a JANOME sewing machine:

Turn the machine off and unplug it.
Locate the presser foot pressure adjustment knob on the side of the machine.

Turn the knob clockwise to increase the pressure, or counterclockwise to decrease the pressure.
Test the pressure by sewing a few stitches on a scrap of fabric.
Adjust the pressure as needed until the fabric feeds properly and the stitches are even.

Once you have adjusted the presser foot pressure, you can begin sewing your project. Remember to check the pressure periodically to ensure that it is still correct.

Machine Not Properly Lubricated

When a machine is not properly lubricated, it can cause a variety of problems. Poor lubrication can lead to increased friction, which can cause the machine to wear out faster, and can even cause it to break down. In order to keep your machine running smoothly, it is important to make sure it is properly lubricated.

Examples of Poor Lubrication

Excessive wear on moving parts
Increased noise from the machine
Reduced performance

Increased heat from the machine

Step-by-Step Instructions for Lubricating a JANOME Sewing Machine

Unplug the machine from the power source.
Remove the needle plate and bobbin case.

Clean the bobbin case and needle plate with a soft cloth.
Apply a few drops of JANOME sewing machine oil to the bobbin case and needle plate.
Replace the bobbin case and needle plate.

Plug the machine back into the power source.
Run the machine for a few minutes to allow the oil to spread.

By following these steps, you can ensure that your JANOME sewing machine is properly lubricated and running smoothly. Proper lubrication is essential for keeping your machine in good working condition and preventing it from breaking down.

Machine Not Properly Serviced or Maintained

When a machine is not properly serviced or maintained, it can lead to a variety of problems. This can include decreased performance, increased noise, and even complete breakdowns. In order to ensure that your machine is running smoothly and efficiently, it is important to regularly service and maintain it. Here, we will discuss how to properly service and maintain a JANOME sewing machine.

Examples of Poor Maintenance

Not cleaning the machine regularly

Not lubricating the machine regularly
Not replacing worn or broken parts
Not checking for loose screws or bolts

Not checking for frayed or worn out threads

Step-by-Step Instructions for Servicing and Maintaining a JANOME Sewing Machine

Unplug the machine from the power source.
Remove the bobbin case and clean it with a soft cloth.

Clean the feed dogs with a soft cloth.
Lubricate the machine with a light machine oil.
Check for any loose screws or bolts and tighten them if necessary.

Check for any frayed or worn out threads and replace them if necessary.
Check the tension of the machine and adjust it if necessary.
Replace any worn or broken parts.

Plug the machine back into the power source.

By following these steps, you can ensure that your JANOME sewing machine is properly serviced and

Tips for Preventing JANOME Sewing Machine Tension Problems

Check the Thread

The first step in preventing tension problems with your JANOME sewing machine is to check the thread. Make sure the thread is the correct size and type for the fabric you are using. If the thread is too thick or too thin, it can cause tension problems. Also, make sure the thread is not tangled or knotted.

Clean the Machine

Regularly cleaning your JANOME sewing machine is essential for preventing tension problems. Make sure to remove any lint or dust that has accumulated in the machine. This will help ensure that the tension discs are working properly.

Adjust the Tension

If you are having tension problems, you may need to adjust the tension on your JANOME sewing machine. To do this, turn the tension knob until the tension is correct. You may need to experiment with different settings to find the right tension for your project.

Check the Needle

The needle is an important part of the sewing process and can affect the tension. Make sure the needle is the correct size and type for the fabric you are using. If the needle is too small or too large, it can cause tension problems.

Use the Right Presser Foot

Using the right presser foot for the fabric you are using is essential for preventing tension problems. Different presser feet can affect the tension, so make sure you are using the correct one for the fabric.

Practice

Practice makes perfect! If you are having trouble with tension, practice on scrap fabric until you get the hang of it. This will help you become more familiar with

10 Common Problems with JANOME Sewing Machines

In addition to the common problems listed above, JANOME sewing machines can also experience the following issues:

Stitch Problems
Sewing Machine Parts Problems

Sewing Machine Keep Jamming
Sewing machine not feeding fabric

FAQ

What is the most common cause of tension problems?

The most common cause of tension problems is incorrect threading of the machine. If the thread is not properly threaded through the tension discs, the tension will be off and the stitches will not be even.

How can I adjust the tension on my JANOME sewing machine?

Adjusting the tension on a JANOME sewing machine is relatively easy. First, make sure the thread is properly threaded through the tension discs. Then, turn the tension knob to the desired setting. Finally, test the tension by sewing a few stitches on a scrap piece of fabric.

What should I do if the tension is still not correct?

If the tension is still not correct after adjusting the tension knob, there may be a problem with the tension discs. Check the discs for any signs of damage or wear and replace them if necessary. If the discs are in good condition, try cleaning them with a soft cloth and a mild detergent.

What other factors can affect the tension on my JANOME sewing machine?

Other factors that can affect the tension on a JANOME sewing machine include the type of fabric being used, the type of thread being used, and the type of needle being used. Make sure to use the correct needle and thread for the fabric being used, and adjust the tension accordingly.

Conclusion

In conclusion, Janome sewing machines are reliable and durable machines that can provide years of service. However, like any machine, they can experience tension problems. Fortunately, these problems can usually be solved with a few simple steps.

Check the threading of the machine.

Check the tension settings.
Check the needle size and type.
Check the bobbin tension.

Clean and oil the machine.

By following these steps, you can usually solve any tension problems you may experience with your Janome sewing machine. If the problem persists, it is best to contact a professional for assistance.