Solving Janome Sewing Machine Upper Thread Breaking Problems

Are you having trouble with your JANOME Sewing machine? If you are experiencing upper thread breaking problems, you are not alone. Many sewers have encountered this issue and have been searching for solutions. This article will provide an overview of the common causes of upper thread breaking problems with JANOME Sewing machines and offer some tips on how to fix them. Upper thread breaking problems can be caused by a variety of factors, including incorrect thread tension, incorrect needle size, and incorrect threading. In addition, the type of fabric being sewn and the type of stitch being used can also contribute to upper thread breaking problems. By understanding the causes of upper thread breaking problems, you can take the necessary steps to fix them and get back to sewing with your JANOME Sewing machine.

Common Causes of Upper Thread Breaking Problems for Janome

Thread tension is too tight

Needle is not inserted correctly
Needle is bent or damaged

Thread is not properly threaded through the machine
Bobbin is not inserted correctly
Bobbin thread is not properly wound

Bobbin case is not properly inserted
Bobbin case is damaged
Thread is not properly guided through the tension discs

Thread is not properly guided through the take-up lever

Causes of JANOME Sewing Machine Upper Thread Breaking Problems

This article will provide an in-depth look at the causes of JANOME sewing machine upper thread breaking problems and explain how to fix them. It will cover topics such as thread tension, needle size, and fabric type. Additionally, it will provide step-by-step instructions on how to adjust the tension, select the right needle, and choose the right fabric for your project. By the end of this article, you will have the knowledge and tools to troubleshoot and fix any upper thread breaking problems you may encounter.

Thread Tension is Too Tight

Thread tension that is too tight can cause a variety of problems when sewing, including skipped stitches, broken threads, and puckering of the fabric. If you are using a Janome sewing machine, there are a few steps you can take to adjust the thread tension and get back to sewing.

Steps to Adjust Thread Tension on a Janome Sewing Machine

Locate the thread tension dial on the top of the machine. It is usually located near the needle.
Turn the dial to the left to loosen the tension. The number on the dial should decrease.

Test the tension by sewing a few stitches on a scrap piece of fabric. If the stitches are still too tight, continue to turn the dial to the left.
Continue to adjust the tension until the stitches are even and the thread is not too tight.

Examples of Thread Tension that is Too Tight

Skipped stitches

Broken threads
Puckering of the fabric
Thread that is too tight on the underside of the fabric

If you are having trouble adjusting the thread tension on your Janome sewing machine, consult the user manual or contact the manufacturer for assistance.

Needle Not Inserted Correctly

When a needle is not inserted correctly into a JANOME sewing machine, it can cause a variety of problems. These problems can range from skipped stitches, uneven stitches, and even broken needles. Fortunately, it is relatively easy to fix this issue.

Examples of Needle Not Inserted Correctly

Needle is inserted at an angle
Needle is inserted too far into the machine
Needle is inserted too shallow into the machine

Needle is not inserted all the way into the needle clamp

Step-by-Step Instructions for Fixing a Needle Not Inserted Correctly on a JANOME Sewing Machine

Turn off the power switch and unplug the machine.
Remove the needle plate by loosening the two screws on the side of the machine.

Remove the needle from the machine.
Check the needle for any signs of damage or wear.
If the needle is damaged or worn, replace it with a new one.

Insert the needle into the needle clamp with the flat side of the needle facing the back of the machine.
Tighten the needle clamp screw securely.
Replace the needle plate and tighten the two screws.

Turn on the power switch and plug the machine back in.
Test the machine to make sure the needle is inserted correctly.

By following these steps, you should be able to easily fix a needle not inserted correctly on a JANOME sewing machine.

Needle is Bent or Damaged

A bent or damaged needle can cause a variety of problems with your sewing machine, including skipped stitches, broken threads, and fabric puckering. Fortunately, it is relatively easy to replace a bent or damaged needle on a Janome sewing machine.

Step-by-Step Instructions

Turn off the power switch and unplug the machine.

Raise the needle to its highest position by turning the hand wheel.
Loosen the needle clamp screw and remove the needle.
Insert the new needle into the needle clamp with the flat side of the needle facing the back of the machine.

Tighten the needle clamp screw.
Lower the needle by turning the hand wheel.
Plug in the machine and turn on the power switch.

Examples of Janome Needles

Janome needles come in a variety of sizes and types, including universal, stretch, denim, and quilting needles. The size of the needle is indicated by a number on the shank of the needle. The higher the number, the thicker the needle.

Universal needles are suitable for most fabrics and are available in sizes 9-18.
Stretch needles are designed for use with stretchy fabrics such as knits and are available in sizes 11-14.
Denim needles are designed for use with heavy fabrics such as denim and are available in sizes 16-18.

Quilting needles are designed for use with quilting fabrics and are available in sizes 11-14.

When selecting a needle, it is important to choose the correct size and type for the fabric you are working with. If you are unsure which needle to use, consult your Janome sewing machine manual for more information.

Thread Not Properly Threaded Through the Machine

Threading a sewing machine is a crucial step in the sewing process. If the thread is not properly threaded through the machine, it can cause a variety of problems, such as skipped stitches, tension issues, and even broken needles. Fortunately, it is relatively easy to fix this issue with the right instructions.

Step-by-Step Instructions for Threading a Janome Sewing Machine

The following instructions are for threading a Janome sewing machine. If you have a different brand of machine, please refer to the user manual for specific instructions.

Start by winding the bobbin. Place the bobbin on the bobbin winder and press the start button. When the bobbin is full, press the stop button and remove the bobbin.
Insert the bobbin into the bobbin case. Make sure the thread is coming off the bobbin in a counter-clockwise direction.

Pull the thread through the slot in the bobbin case and then pull it up through the tension disc.
Thread the needle from the front to the back. Make sure the thread is coming off the spool in a clockwise direction.
Pull the thread down and around the thread guide at the back of the machine.

Pull the thread up and around the thread guide at the top of the machine.
Pull the thread down and around the thread guide at the front of the machine.
Pull the thread up and through the take-up lever.

Pull the thread down and around the thread guide at the back of the machine.
Pull the thread up and around the thread guide at the top of the machine.
Pull the thread down and around the thread guide at the front of the machine.

Pull the thread up and through the needle.
Pull the thread down and around the thread guide at the back of the machine.

Bobbin Not Inserted Correctly

If your JANOME sewing machine is not stitching correctly, it could be because the bobbin is not inserted correctly. This is a common issue that can be easily fixed with a few simple steps.

Examples of Bobbin Not Inserted Correctly

Thread is not coming up from the bobbin.

Thread is coming up from the bobbin, but it is tangled or knotted.
The bobbin is not spinning correctly.
The bobbin is not seated properly in the bobbin case.

Step-by-Step Instructions for Fixing Bobbin Not Inserted Correctly

Turn off the power switch and unplug the machine.
Open the bobbin cover and remove the bobbin.
Check the bobbin for any damage or debris.

Clean the bobbin case and the bobbin with a soft cloth.
Re-insert the bobbin into the bobbin case, making sure it is seated properly.
Close the bobbin cover and plug in the machine.

Turn on the power switch and test the machine.

If the bobbin is still not inserted correctly, you may need to consult your JANOME sewing machine manual for further instructions.

Bobbin Thread Not Properly Wound: How to Fix It with a Janome Sewing Machine

If your bobbin thread is not properly wound, it can cause a variety of problems with your sewing machine, including skipped stitches, tension issues, and thread breakage. Fortunately, it’s easy to fix this problem with a Janome sewing machine. Here’s how:

Step 1: Remove the Bobbin

First, you’ll need to remove the bobbin from the machine. To do this, open the bobbin cover and press the bobbin winder stopper. This will release the bobbin, allowing you to remove it from the machine.

Step 2: Wind the Bobbin

Next, you’ll need to wind the bobbin. To do this, place the bobbin on the bobbin winder and press the bobbin winder spindle. This will start the winding process. When the bobbin is full, the machine will automatically stop winding.

Step 3: Re-Insert the Bobbin

Once the bobbin is wound, you’ll need to re-insert it into the machine. To do this, open the bobbin cover and insert the bobbin into the machine. Make sure the thread is coming off the bobbin in a counter-clockwise direction.

Step 4: Test the Thread

Finally, you’ll need to test the thread to make sure it’s properly wound. To do this, press the foot pedal and observe the thread as it comes off the bobbin. If the thread is coming off smoothly and evenly, then the bobbin is properly wound. By following these steps, you can easily fix the problem of bobbin thread not being properly wound on a Janome sewing machine. With a properly wound bobbin, you can enjoy smooth, even stitches and fewer tension issues.

Bobbin Case is Not Properly Inserted

A bobbin case is an important part of a sewing machine, as it holds the bobbin in place and helps to regulate the tension of the thread. If the bobbin case is not properly inserted, it can cause a variety of problems, such as thread bunching, skipped stitches, and uneven tension.

Examples of Problems Caused by an Improperly Inserted Bobbin Case

Thread bunching
Skipped stitches

Uneven tension
Incorrect stitch length
Incorrect stitch width

Step-by-Step Instructions for Fixing an Improperly Inserted Bobbin Case

Unplug the sewing machine and remove the bobbin case.
Check the bobbin case for any damage or debris. If there is any, clean it off with a soft cloth.
Check the bobbin case for any bent or broken parts. If there are any, replace the bobbin case.

Check the bobbin case for any loose screws or parts. If there are any, tighten them.
Check the bobbin case for any worn or frayed parts. If there are any, replace the bobbin case.
Re-insert the bobbin case into the sewing machine, making sure it is properly aligned.

Tighten the bobbin case securely.
Test the sewing machine to make sure the bobbin case is properly inserted.

Bobbin Case is Damaged: How to Fix It

A bobbin case is an important part of a sewing machine, as it holds the bobbin in place and helps to regulate the tension of the thread. If the bobbin case is damaged, it can cause the thread to become tangled or the machine to malfunction. Fortunately, it is possible to fix a damaged bobbin case with a few simple steps.

Steps to Fix a Damaged Bobbin Case

Unplug the sewing machine and remove the bobbin case.

Inspect the bobbin case for any signs of damage, such as cracks, chips, or dents.
If the bobbin case is damaged, it will need to be replaced. Purchase a new bobbin case that is compatible with your sewing machine.
Remove the old bobbin case and replace it with the new one.

Replace the bobbin and thread the machine according to the manufacturer’s instructions.
Test the machine to make sure it is working properly.

Tips for Fixing a Damaged Bobbin Case

Always unplug the sewing machine before attempting to repair it.

Be sure to purchase a bobbin case that is compatible with your sewing machine.
If the bobbin case is not damaged, check the tension of the thread and adjust it if necessary.
If the bobbin case is still not working properly, take the machine to a professional for further inspection.

Fixing a damaged bobbin case is a relatively simple process that can be done in a few easy steps. With the right tools and a bit of patience, you can have your sewing machine up and running in no time.

Thread Not Properly Guided Through Tension Discs

When thread is not properly guided through the tension discs, it can cause a variety of problems, such as skipped stitches, uneven tension, and thread breakage. Fortunately, this issue is relatively easy to fix. Here are the steps to take to ensure that your thread is properly guided through the tension discs.

Steps to Fix Thread Not Properly Guided Through Tension Discs

Check the threading of the machine. Make sure that the thread is properly threaded through the tension discs and that the thread is not tangled or knotted.
Check the tension discs. Make sure that the tension discs are properly adjusted and that the thread is not slipping through the discs.
Check the needle. Make sure that the needle is properly inserted and that the thread is not slipping through the eye of the needle.

Check the bobbin. Make sure that the bobbin is properly inserted and that the thread is not slipping through the bobbin case.
Check the thread path. Make sure that the thread is properly guided through the tension discs and that the thread is not slipping through the tension discs.
Check the tension settings. Make sure that the tension settings are properly adjusted and that the thread is not slipping through the tension discs.

By following these steps, you should be able to ensure that your thread is properly guided through the tension discs. If you are still having issues, you may need to consult a professional for further assistance.

Thread Not Properly Guided Through the Take-Up Lever

When sewing, it is important that the thread is properly guided through the take-up lever. If the thread is not properly guided, it can cause the machine to jam, resulting in uneven stitches and other problems. Fortunately, this issue can be easily fixed with a few simple steps.

Steps to Fix Thread Not Properly Guided Through the Take-Up Lever

Unplug the machine from the power source.
Remove the needle plate and bobbin case.
Check the take-up lever for any obstructions or debris.

If there are any obstructions, remove them.
Check the thread path for any kinks or tangles.
If there are any kinks or tangles, gently pull the thread to remove them.

Replace the needle plate and bobbin case.
Thread the machine according to the manufacturer’s instructions.
Plug the machine back into the power source.

Test the machine to make sure the thread is properly guided through the take-up lever.

If the thread is still not properly guided through the take-up lever after following these steps, it may be necessary to take the machine to a professional for further inspection and repair.

Tips for Preventing Upper Thread Breaking Problems on a JANOME Sewing Machine

Check the Thread

Ensure that the thread is the correct type and weight for the fabric being used.
Check that the thread is not tangled or knotted.

Make sure the thread is not too old or frayed.

Check the Needle

Ensure that the needle is the correct size and type for the fabric and thread being used.
Check that the needle is not bent or damaged.

Replace the needle if it is more than 8 hours of use.

Check the Tension

Adjust the upper thread tension to the recommended setting for the fabric and thread being used.
Check the tension periodically while sewing.

If the tension is too tight, the thread may break.

Check the Bobbin

Ensure that the bobbin is the correct type and size for the fabric and thread being used.
Check that the bobbin is not tangled or knotted.

Make sure the bobbin is not too old or frayed.

Check the Feed Dogs

Ensure that the feed dogs are clean and free of lint and debris.
Check that the feed dogs are not bent or damaged.

Replace the feed dogs if they are worn or damaged.

General Maintenance

Clean the machine regularly to remove lint and debris.
Oil the machine periodically to keep it running smoothly.

10 Common Problems with JANOME Sewing Machines

In addition to the problems already mentioned in this article, there are a few other issues that can arise with Janome sewing machines.

Sewing machine not feeding fabric

These are just a few of the potential problems that can arise with Janome sewing machines. If you experience any of these issues, it is important to take the time to troubleshoot and identify the source of the problem before attempting to fix it.

FAQ

What causes upper thread breaking problems on JANOME sewing machines?

Upper thread breaking problems on JANOME sewing machines can be caused by a variety of factors, including:

Incorrect thread tension
Incorrect needle size

Incorrect needle type
Incorrect thread type
Incorrect threading of the machine

Incorrect bobbin winding
Incorrect bobbin case tension
Incorrect presser foot pressure

Incorrect stitch length
Incorrect stitch width
Incorrect fabric type

Incorrect needle position
Incorrect thread path
Incorrect threading of the needle

Incorrect threading of the bobbin
Incorrect threading of the bobbin case
Incorrect threading of the presser foot

Incorrect threading of the take-up lever
Incorrect threading of the feed dogs
Incorrect threading of the bobbin winder

Incorrect threading of the needle plate
Incorrect threading of the bobbin cover
Incorrect threading of the bobbin thread guide

Incorrect threading of the thread guide
Incorrect threading of the thread tension discs
Incorrect threading of the thread take-up lever
Incorrect threading of the thread cutter
Incorrect threading of the thread guide plate

Conclusion

Janome sewing machines are reliable and easy to use, but they can occasionally experience upper thread breaking problems. To prevent this from happening, it is important to ensure that the thread is properly threaded, the tension is set correctly, and the bobbin is wound correctly. Additionally, it is important to use the correct needle size and type for the fabric being sewn. If these steps are followed, the chances of upper thread breaking problems should be minimized.