NECCHI Sewing machine breaking needles

NECCHI sewing machines are popular among sewing enthusiasts for their quality and durability. However, like any other sewing machine, they can experience issues such as needle breakage.

A needle breaking in a sewing machine NECCHI can be frustrating and time-consuming, but it is a problem that can be resolved with the right knowledge and tools. In this article, we will discuss the common causes of needle breakage in NECCHI sewing machines and provide solutions to help you fix the issue.

List of the 10 main causes of breaking needles problems for the NECCHI Sewing Machine

Here are the main causes of breaking needles problems for the NECCHI Sewing Machine:

Damaged or bent needle
Dull needle
Incorrect needle size for fabric

Incorrect needle and thread combination
Wrong sewing machine thread tension
Wrong presser foot attached to the machine

Incorrect needle insertion
Bobbin case problems
Sewing through thick layers

Worn or damaged machine parts.

Common Problems Causing A Needle Break in Sewing Machine NECCHI

The needle on sewing machine NECCHI is damaged, bent

A damaged or bent needle is one of the most common causes of needle breakage in a sewing machine NECCHI. When a needle is bent or damaged, it can hit other parts of the machine, causing it to break. This can happen if the machine is not threaded correctly or if the fabric is too thick.

Reason: A needle can be damaged or bent due to several reasons such as hitting a pin while sewing, improper insertion of the needle, or using a dull or wrong size needle.

Solution: To prevent needle breakage, you should always use a new, sharp needle that is the correct size for your fabric. Here are the steps to replace the needle on your NECCHI sewing machine:

Turn off the machine and unplug it from the power source.
Loosen the screw that holds the needle in place using a screwdriver.

Remove the old needle from the machine and dispose of it safely.
Insert the new needle into the needle clamp with the flat side facing the back of the machine.
Tighten the screw that holds the needle in place using a screwdriver.

Make sure the needle is inserted correctly by moving the handwheel up and down. The needle should move up and down smoothly without hitting any other parts of the machine.

The needle on sewing machine NECCHI is Dull

A dull needle can also cause needle breakage in a NECCHI sewing machine. A dull needle can snag the fabric, causing it to pull and break.

Reason: A needle can become dull over time due to repeated use or hitting pins while sewing.

Solution: To prevent needle breakage due to a dull needle, you should replace the needle regularly. Here are the steps to replace a dull needle on your NECCHI sewing machine:

Turn off the machine and unplug it from the power source.
Loosen the screw that holds the needle in place using a screwdriver.

Remove the old needle from the machine and dispose of it safely.
Insert the new needle into the needle clamp with the flat side facing the back of the machine.
Tighten the screw that holds the needle in place using a screwdriver.

Make sure the needle is inserted correctly by moving the handwheel up and down. The needle should move up and down smoothly without hitting any other parts of the machine.

How to check the needle on a NECCHI sewing machine

To check the needle on your NECCHI sewing machine, you should:

Turn off the machine and unplug it from the power source.

Remove the needle from the machine using a screwdriver.
Inspect the needle for any signs of damage, such as a bent or dull tip.
Check the needle size to make sure it is the correct size for your fabric.

Incorrect NECCHI needle size for fabric

Using the wrong needle size for your fabric can also cause needle breakage in a NECCHI sewing machine. A needle that is too small for the fabric can break easily, while a needle that is too large can leave holes in the fabric.

Reason: Using the wrong needle size for your fabric can cause the needle to break due to the extra pressure it puts on the needle and the fabric. It can also cause the needle to push or pull the fabric too much, resulting in damage to the fabric.

Solution: To prevent needle breakage due to the wrong needle size, you should always use the correct needle size for your fabric. Refer to the manufacturer’s recommendations or the needle package to determine the correct needle size for your fabric. Here are the steps to change the needle size on your NECCHI sewing machine:

Turn off the machine and unplug it from the power source.
Loosen the screw that holds the needle in place using a screwdriver.
Remove the old needle from the machine and dispose of it safely.

Insert the new needle into the needle clamp with the flat side facing the back of the machine.
Tighten the screw that holds the needle in place using a screwdriver.
Adjust the needle position if necessary to ensure it is in the correct position for the new needle size.

NECCHI Needle and thread combinations

Using the wrong needle and thread combination can also cause needle breakage in a NECCHI sewing machine. The thread may be too thick or thin for the needle, causing it to break.

Reason: Using the wrong needle and thread combination can cause the needle to break due to the extra pressure it puts on the needle and the fabric. It can also cause the thread to knot or break, which can cause the needle to break.

Solution: To prevent needle breakage due to the wrong needle and thread combination, you should always use the correct needle and thread combination for your fabric. Refer to the manufacturer’s recommendations or the needle and thread package to determine the correct combination for your fabric. Here are the steps to change the thread on your NECCHI sewing machine:

Turn off the machine and unplug it from the power source.
Remove the old thread from the machine and dispose of it safely.
Thread the machine with the new thread, making sure it is the correct thickness for the needle.

Adjust the thread tension if necessary to ensure the thread flows smoothly through the machine.

Wrong NECCHI sewing machine thread tension

Incorrect thread tension can cause needle breakage in a NECCHI sewing machine. If the tension is too tight, the needle may break or the thread may break. If the tension is too loose, the thread may tangle or bunch up, causing the needle to break.

Reason: Incorrect thread tension can cause the thread to pull or push the fabric too much, resulting in damage to the fabric or the needle.

Solution: To prevent needle breakage due to incorrect thread tension, you should adjust the tension to the correct setting for your fabric. Here are the steps to adjust the thread tension on your NECCHI sewing machine:

Turn off the machine and unplug it from the power source.
Locate the tension dial on your machine. It is usually located near the top of the machine.

Set the tension dial to the recommended setting for your fabric.
Sew a test sample on a scrap piece of fabric to ensure the tension is correct.

The wrong NECCHI sewing machine presser foot is attached

Using the wrong presser foot on a NECCHI sewing machine can cause needle breakage. If the presser foot is not designed for your fabric, it may not hold the fabric in place correctly, causing it to move or bunch up, resulting in needle breakage.

Reason: Using the wrong presser foot can cause the fabric to move or bunch up, resulting in damage to the fabric or the needle.

Solution: To prevent needle breakage due to the wrong presser foot, you should use the correct presser foot for your fabric. Refer to the manufacturer’s recommendations or the presser foot package to determine the correct presser foot for your fabric. Here are the steps to change the presser foot on your NECCHI sewing machine:

Turn off the machine and unplug it from the power source.

Raise the presser foot using the presser foot lever.
Remove the current presser foot by unscrewing it from the presser foot holder.
Attach the new presser foot by sliding it onto the presser foot holder and screwing it into place.

Lower the presser foot using the presser foot lever.

4 Other Common Causes of Needle Breakage on a NECCHI Sewing Machine

In addition to the common problems discussed above, there are a few other issues that may cause problems with the needle on your NECCHI sewing machine. These include:

Incorrect needle insertion: If the needle is not inserted properly into the needle holder, it may not be able to make proper contact with the bobbin thread, resulting in skipped stitches or thread breakage.

Bobbin case problems: If the bobbin case is not properly installed or is damaged, it may interfere with the movement of the needle, causing it to bend or break.
Sewing through thick layers: When sewing through thick layers of fabric or multiple layers, the needle may become damaged or break due to the increased resistance.
Worn or damaged machine parts: Over time, parts of your sewing machine, such as the needle bar or hook, may become worn or damaged, leading to problems with the needle.

To avoid these problems, it’s important to properly maintain your NECCHI sewing machine by cleaning and oiling it regularly, using the correct needle and thread for your project, and being careful when sewing through thick layers or over seams.

10 Common Problems with NECCHI Sewing Machines

There are a few other issues that can arise with NECCHI sewing machines. These include:

Stitch Problems

If you do encounter problems with the needle or other parts of your sewing machine, it’s always best to consult the manufacturer’s instructions or seek assistance from a qualified repair technician.

FAQ

What size needle should I use on my NECCHI sewing machine?

It depends on the type of fabric you are sewing. Generally, heavier fabrics require larger needles. Consult your machine’s manual or the needle package for recommendations.

Can I use any brand of needles on my NECCHI sewing machine?

Yes, you can use needles from any brand as long as they are the correct size and type for your machine and fabric.

What types of needles are available for NECCHI sewing machines?

NECCHI sewing machines can use a variety of needles, including universal, denim, leather, and embroidery needles.

How often should I change the needle on my NECCHI sewing machine?

It’s recommended to change the needle after 8-10 hours of sewing time, or whenever it becomes damaged or dull.

Can using the wrong size needle cause problems on my NECCHI sewing machine?

Yes, using the wrong size needle can cause problems such as skipped stitches, thread breakage, and damage to the fabric or machine.

How do I know if my NECCHI sewing machine needle is dull or damaged?

Look for signs of wear or damage, such as a bent or broken tip, or visible scratches or chips on the needle. You may also notice skipped stitches or uneven stitches.

Can I sharpen a dull needle on my NECCHI sewing machine?

No, it’s not recommended to sharpen needles. It’s safer and more effective to simply replace the needle.

Can I reuse needles on my NECCHI sewing machine?

No, it’s not recommended to reuse needles. Always use a new needle for each project.

How do I change the needle on my NECCHI sewing machine?

Refer to your machine’s manual for specific instructions, but generally, you’ll need to turn off the machine, raise the needle, loosen the needle clamp screw, remove the old needle, insert the new needle, and tighten the needle clamp screw.

How do I select the right needle and thread combination for my NECCHI sewing machine?

Consider the type of fabric you’re using, as well as the weight and type of thread. Consult your machine’s manual or the needle and thread packaging for recommendations.

Conclusion. NECCHI Sewing machine breaking needles

In conclusion, there are several common reasons why a needle may break on a NECCHI sewing machine, including a damaged or dull needle, using the wrong needle size or thread combination, incorrect thread tension, and using the wrong presser foot. By understanding the causes of these problems, you can take steps to prevent them from occurring and keep your sewing machine working smoothly.

Always refer to the manufacturer’s recommendations or package instructions when selecting needles, thread, and presser feet, and make sure to adjust the thread tension as needed for your fabric. By taking these simple steps, you can avoid needle breakage and enjoy trouble-free sewing with your NECCHI sewing machine.