Troubleshooting Singer 1304 sewing machine bobbin holder

The Singer 1304 sewing machine is a great, reliable and easy to use model for beginners and experienced sewers alike. But even the best machines can have problems from time to time. One of the common issues with the Singer is the bobbin holder. 

Fortunately, there are some simple steps you can take to identify and troubleshoot the problem. In this guide, we’ll discuss the common problems associated with the Singer 1304 bobbin holder and provide some simple solutions that can help you get your machine back up and running in no time!

Singer 1304 sewing machine bobbin holder problems and solutions

In addition to issues with the bobbin, the sewing machine Singer 1304 may also has problems with the bobbin holder. Listed below are the most common problems with the bobbin case:

1. Singer 1304 sewing machine bobbin holder came out;
2. Singer 1304 sewing machine problems bobbin case keeps slipping and locking up needle;
3. Singer 1304 sewing machine thread keeps tangling around bobbin holder;
4. Singer 1304 sewing machine needle hits bobbin holder;
5. Singer 1304 sewing machine has a clanking sound on its bobbin holder.

In order to address the issues aforementioned, we recommend delving deeper into research and finding possible solutions:

Singer 1304 Sewing Machine Bobbin Holder Came Out

This problem often happens when you take out the bobbin holder and try to put it back in. If it doesn’t fit, there are a few possible reasons like dirt, an old or damage bobbin case, or using the wrong type of bobbin case for your machine model. The most frequent cause is forgetting to place the bobbing holder’s finger into the small groove by the needle plate. Hence, always check that your bobbing holder’s finger is resting snugly in its rightful groove before stitching away!

How to fix bobbin case in sewing machine Singer 1304

Sewing machines require that the bobbin holder be set up correctly in order to ensure proper sewing. Here are the main features of a properly setup bobbin holder. How to fix bobbin case holder in sewing machine:

1. The direction of the bobbin should face out clockwise for a Singer 1304 sewing machine; 

2. Positioning the Bobbin-Winding Spindle – After winding the bobbin, always return its spindle to its initial position;

3. Regularly clean off lint accumulation from the bobbin holder and entire machine;

4. Thread must pass through its side slot in the bobbin holder before being inserted through to the needle for proper threading;

5. Feed thread through winding tension disks to keep it taut and prevent tangling.

Sewing machines need to be serviced regularly in order to ensure that bobbin cases are functioning properly

How should the bobbin holder in a Singer 1304 sewing machine be?

This type 15 Singer 1304 Bobbin Case is one of the most popular, used on sewing machines where you insert the bobbin from either the front or side. The case works with many brands, but it’s especially perfect for those Singer models that take this type of case.

Singer 1304 sewing machine problems bobbin case keeps slipping and locking up needle

The bobbin case may be clogged, or the tension spring in the bobbin case assembly could be too tight. To resolve this issue, you can use compressed air to clear any dust and debris from inside the bobbin area, then adjust the tension spring as necessary until it is neither too loose nor too tight.

Be sure to reattach the bobbin case correctly after making any adjustments. If the problem persists, you may need to replace the bobbin case assembly or have it serviced by a professional.

Singer 1304 sewing machine thread keeps tangling around bobbin holder

The problem of thread tangling around the bobbin holder in a Singer 1304 sewing machine is caused by incorrect threading. When this happens, the top thread cannot be pulled firmly through the fabric and becomes tangled around the bobbin case, resulting in a rattling sound. To fix this issue, ensure that you properly thread your sewing machine following the manual instructions.

To make sure you have the correct threading, follow these steps:

1) Insert the spool of thread into its holder and pull out about 8 to 10 inches of thread.

2) Pass the thread through the eyelet of its guide and then insert it into the lower tension control device.

3) Pull the thread up and over the upper tension control device and then into the Take-up Lever.

4) Move the thread back down, passing it through the needle bar thread guide, to the left side of the needle.

5) Pass it from left to right underneath the presser foot, around its pressure foot lifter, and through the needle eye

6) Pull the thread back up to the top of the machine and pass it through its Thread Guide Attachment

7) Finally, attach the thread to its bobbin holder for winding.

By properly threading your Singer 1304 sewing machine, you can reduce or eliminate any issues with thread tangling around the bobbin holder. If you are still having trouble, please refer to your user manual or contact an authorized Singer dealer for further assistance.

Singer 1304 sewing machine needle hits bobbin holder

Sewing machine needle may hit the bobbin case due to incorrect tension, placement of the bobbin case, the position of the needle or presser foot, and timing. Solutions include replacing the needle, adjusting the tension, checking the bobbin case, checking the position of the needle, tightening needle clamp, and adjusting timing. 

Additionallyewing machine users should also clean their device regularly with unplugging the machine from the power source, removing any thread or fabric, dusting the outside with a soft cloth, using a brush or vacuum to clean lint inside and wiping down the needle and bobbin case with rubbing alcohol. This will help ensure that your sewing machine is running at optimum performance.

How to identify if your needle has hit the bobbin case

Signs that this may have occurred include a bent or broken needle, thread wrapped around the needle or bobbin case, loud noises when trying to sew, an inability for the needle to move when sewing, and fabric bunching up underneath the needle.

Singer 1304 sewing machine has a clanking sound on its bobbin holder.

When your Singer 1304 sewing machine has a clanking sound on its bobbin holder, the most likely cause is lint build up in the bobbin case. Lint accumulates in the bobbin case as you sew and can prevent the hook of your bobbin case from forming stitches properly. This often leads to an audible knocking sound as your needle enters and exits the bobbin case.

To solve this issue, you should clean out the lint from your bobbin case. To do so, use a small brush such as an old toothbrush or nail brush to remove any debris that has collected in the bobbin case. You can also use compressed air to blow out any dust or lint that has collected in the bobbin case.

Once you have done this, your Singer 1304 sewing machine should no longer make a clanking sound when using its bobbin holder. Additionally, you should regularly clean out your bobbin case to prevent the buildup of lint and ensure smooth operation of your machine.

Singer 1304 sewing machine bobbin case diagram (diagram of a bobbin holder in sewing machine)

Singer 1304 sewing machine bobbin case assembly

Conclusion. Troubleshooting Singer 1304 sewing machine bobbin holder

In conclusion, troubleshooting and maintaining your Singer 1304 sewing machine is a straightforward process that can save you time and frustration. By following the steps outlined in this article, you will be able to easily identify common issues such as thread tangling, needle hitting bobbin case, and clanking sound on the bobbin holder.

Once these problems are identified, you can follow the instructions to fix them and get back to sewing! Additionally, regular maintenance such as cleaning out lint buildup is important for keeping your machine running optimally. With these tips in mind, you are sure to achieve success with your Singer 1304 sewing machine!