SINGER M1505 Sewing machine fabric problem

If you are experiencing any fabric feeding issues with your SINGER M1505 sewing machine, rest assured that you’re not alone. Uneven feeding, puckering and fabric damage can all be the result of improper usage of this particular model. To get optimal results while using your SINGER M1505, it’s essential to recognize potential causes for these problems in order to avoid them!

So don’t wait – keep reading to discover how you can make full use of the capabilities offered by your amazing SINGER M1505 sewing machine.

SINGER M1505 sewing machine not feeding fabric

If you’re experiencing difficulties with fabric feeding when running a SINGER M1505 sewing machine, the culprit could be attributed to incorrect presser foot pressure, worn down feed dogs, an imbalanced or bent presser foot, or the stitch regulator being turned back too far and thus rendering the feed inactive. Furthermore, having an already bent needle can cause uneven threading as it runs at varying speed.

Why Is My Fabric Not Feeding Through SINGER M1505 sewing machine? How to fix when SINGER M1505 sewing machine not feeding fabric?

Before you attempt to resolve the problems your SINGER M1505 sewing machine is having with fabric feeding, it’s essential to determine the source of the issue. Let us now explore each potential cause and identify how we can fix them.

Wrong Needle in SINGER M1505 sewing machine

If fabric is not going through a SINGER M1505 sewing machine correctly, the needle may be inappropriate for the type of material being used. For lightweight fabrics, it is important to use size 60/8 or 70/10 needles for best results; whereas heavier materials like polymer, cotton and polyester need different types of needles. Make sure any new needles are sharp and in good condition before installation.​

Tips for Sewing with Stretchy, Silky or Very Delicate Fabrics

When using the SINGER M1505 sewing machine to sew delicate materials like stretchy fabric, slippery material or very fine fabrics, it is important to take extra precaution. Staying away from the edge of the fabric and running the machine at a slow speed will help avoid any potential issues.

Additionally, use of a presser foot and straight stitch can help keep thin layers of fabric stable while quilting. Following these simple steps ensures that your SINGER M1505 sewing machine runs smoothly when working with these fabrics.

Sewing Straight Stitch 

  • To kickstart your sewing journey, set the machine for a straight stitch. (1) 
  • Position the fabric beneath the presser foot with its edge aligned to the seam guide line on the needle plate. (2) 
  • Subsequently, lower down that lifter and tread firmly on that foot control! (3) Ready? Your project is officially underway!

Stabilizing Flimsy Edges for Sewing with a SINGER M1505 sewing machine

When using a Singer M1505 sewing machine, it can be hard to backstitch properly on thin fabrics. To prevent jamming and ensure accuracy, place tissue paper behind the fabric and start in the middle of the material instead of at its edges.

Additionally, join two pieces of fabric together along one edge before starting your project and keep both needle and bobbin threads above and below the material while working with stretchy materials. These tips will help you stabilize any flimsy edges while sewing!

Stitch Length Setting Might Be Zero on a SINGER M1505 sewing machine

To ensure that the fabric being sewn is not compromised, it is important to check the stitch length setting of a SINGER M1505 sewing machine. In some cases, the default zero setting may not be optimal for the specific material. To remedy this, adjust the stitch length using the knob available on your machine and test it with a piece of fabric beforehand. This way, you can make sure that your stitching will be done correctly and effectively.

Incorrect Threading of the SINGER M1505 sewing machine

Incorrect threading can be the reason why fabric may not feed properly through the SINGER M1505 sewing machine. Therefore, one must check the thread from beginning to end and make sure that it is threaded correctly. If needed, take out and re-thread the machine again. Additionally, examine the suitable material for use with this SINGER M1505 sewing machine. Lastly, confirm that no threads are stuck in or around the bobbin area.

Feed Dogs Down, Worn, or Jammed of the SINGER M1505 sewing machine

If you’re having trouble with fabric not feeding correctly while using the SINGER M1505 sewing machine, it could be due to an issue with the feed dogs. It’s important that you remember to raise the feed dogs after completing each task. 

The feed dogs may become loose and need tightening over time. To inspect them further, simply raise the presser foot and turn the handwheel while observing them. If this doesn’t resolve your problems, take a look at your SINGER M1505 sewing machine instruction manual or contact customer service for more assistance.

Large Plate Cover Hole of the SINGER M1505 sewing machine

Using the SINGER M1505 sewing machine, it is essential to use the right plate cover hole for the fabric being sewn. Thin fabrics should be sewn with a straight stitch plate that has a small hole in order to prevent fabric shifting. For zigzag stitches or decorative stitching, one must switch back to the regular plate for best results. Failure to do so may lead to unsatisfactory sewing outcomes.

Dirty SINGER M1505 sewing machine

Caring for your SINGER M1505 sewing machine is of utmost importance; therefore, be sure to give it a thorough cleanse from time to time. Inspect the bobbin compartment for any debris and eliminate it straight away. Whenever you are cleaning SINGER M1505 sewing machine, make sure to apply oil with an old fabric piece as too much lubrication can corrode new materials if fed through the SINGER M1505 sewing machine.

Regularly maintaining and oiling your device will help ward off issues when stitching fabrics together.

SINGER M1505 sewing machine Tension Problem 

The tension settings on the upper and lower threads of the SINGER M1505 sewing machine may be causing fabric feeding issues. To fix this, start with a lighter setting for the upper thread and gradually increase it until even stitches appear. Do the same for the lower thread – begin with a higher setting, then decrease if needed. Lastly, re-check stitch quality before starting a project.

Presser Foot on the SINGER M1505 sewing machine Is Not Down

Before launching into a sewing project with the SINGER M1505 machine, it is important to always double-check that the presser foot is down. Failure to do so could result in fabrics not being correctly fed through the machine while sewing.

To avoid this, establishing a reminder system as a personal practice can help ensure that the presser foot is securely in its place before starting any stitching work. This will make sure that fabric is properly maneuvered throughout your SINGER M1505 sewing machine for successful completion of all projects.

Overworking SINGER M1505 sewing machine

When using a SINGER M1505 sewing machine, it is important to take regular breaks between projects. If the SINGER M1505 sewing machine is operated for too long without a break, it may stop feeding fabric properly. 

To avoid this issue, take a rest of around 30 minutes and no more than two hours after each project before resuming any further operation. This will give your SINGER M1505 sewing machine time to cool down and help prevent future problems with feeding fabric correctly.


What Feeds Fabric Through a SINGER M1505 sewing machine?

The feed dogs in a SINGER M1505 sewing machine are the essential parts of the machine responsible for pushing and steering fabric through it while sewing. If these dog teeth aren’t adjusted correctly, they can cause issues with your project. It’s important to check them before you start any type of stitching.

Can You Use a SINGER M1505 sewing machine With Malfunctioning Feed Dogs?

It is suggested to not operate a SINGER M1505 sewing machine if the feed dogs are malfunctioning. Feed dogs are indispensable parts of a stitching machine, and they provide the necessary timing and motion for fabric to properly move through the device, creating an even lockstitch. Consequently, it is crucial to guarantee that your SINGER M1505 sewing machine has working feed dogs.

What is the best way to ensure my SINGER M1505 sewing machine is feeding fabric correctly?

The best way to ensure your SINGER M1505 sewing machine is feeding fabric correctly is to make sure that the tension settings on both upper and lower threads are adjusted properly. To make sure the SINGER M1505 sewing machine is properly feeding fabric, adjust upper and lower thread tension settings, make sure the presser foot is down before beginning to sew, ensure the feed dogs are in their proper place, and take regular breaks after finishing a project. Additionally, keep the machine clean and oiled regularly.


The SINGER M1505 sewing machine is a reliable and dependable tool to sew any type of fabric. By following the steps provided, users can ensure that their projects turn out perfectly with each use of the SINGER M1505 sewing machine.

It’s important to take the time to double check all settings before beginning any project; this will help avoid any issues related to stitch quality or other fabric problems. With proper care and attention, users can rest assured that their SINGER M1505 sewing machine will deliver satisfactory results.

Leave a Comment