Troubleshooting JANOME Sewing machine parts

JANOME sewing machines are known for their excellent quality and reliability, but like any other machine, they can experience problems from time to time. Troubleshooting the various parts of a JANOME sewing machine can be challenging, especially for those who are not familiar with the machine’s inner workings.

However, with some knowledge and guidance, many of these issues can be easily resolved, saving you time and money. In this article, we will discuss some common problems that can occur with JANOME sewing machine parts and provide step-by-step instructions on how to troubleshoot and fix them.

List of the 10 Commonly Broken JANOME Sewing Machine Parts

Here is a list of parts and components of the JANOME sewing machine that are most commonly reported to break:

1. Needles
2. Bobbin case
3. Bobbin
4. Tension discs
5. Feed dogs
6. Spool pins and holders
7. Reverse lever
8. Stitch length adjustment
9. Presser foot lever
10. Take-up lever

It is important to note that while these parts may experience issues more frequently than others, proper maintenance and care can help prevent premature failure.

Common JANOME Sewing machine parts problems and solution

If you are a JANOME sewing machine user, you may experience problems with its parts from time to time. These issues can be frustrating and can interrupt your sewing projects. Fortunately, many of these problems have simple solutions that you can do yourself. In this article, we will discuss some common JANOME sewing machine parts problems and their solutions to help you troubleshoot and resolve any issues you encounter.

JANOME sewing machine motor problems

The JANOME sewing machine motor is not working, or it is running slowly, making strange noises, or overheating.

Causes of the JANOME Sewing machine motor problems

1. Loose or disconnected power cord.
2. Faulty foot pedal.
3. Dirty or worn-out brushes.
4. Overuse or overheating of the motor.
5. Faulty motor capacitor.

Troubleshooting JANOME Sewing machine motor problems

Step-by-step instructions:

1. Check that the power cord is firmly plugged in and properly connected to the sewing machine.
2. Check the foot pedal. Make sure it is not damaged or worn out. If it is, replace it.
3. Open the motor casing and inspect the brushes. If they are dirty or worn out, clean or replace them.
4. Check the motor for overheating. If it is hot to the touch, turn off the machine and allow it to cool down.
5. Test the motor capacitor with a multimeter. If it is faulty, replace it.

JANOME sewing machine belt problems

The JANOME sewing machine belt may break or slip, resulting in poor stitching quality or the inability to sew at all.

Causes of the JANOME Sewing machine belt problems

1. Overuse or age of the belt.
2. Misalignment of the belt.
3. Incorrect installation of the belt.
4. Dirty or worn-out pulleys.

Troubleshooting JANOME Sewing machine belt problems

Step-by-step instructions:

1. Turn off the sewing machine and unplug it from the power source.
2. Remove the needle plate and inspect the belt for any signs of damage, such as fraying or cracking. If the belt is damaged, replace it.
3. Check the alignment of the belt. If it is not properly aligned, loosen the motor mounting bolts and adjust the position of the motor to realign the belt.
4. Ensure the belt is correctly installed. Refer to the machine’s manual or guide for instructions on how to do this.
5. Clean the pulleys and make sure they are not worn out. If they are, replace them.

JANOME sewing machine presser foot problems

The presser foot on the JANOME sewing machine may not hold the fabric properly, or it may not go down when the machine is turned on.

Causes of the JANOME Sewing machine presser foot problems

1. Misaligned or loose presser foot.
2. Bent or damaged presser foot.
3. Faulty presser foot lifter mechanism.
4. Dirt or debris interfering with the presser foot.

Troubleshooting JANOME Sewing machine presser foot problems

Step-by-step instructions:

1. Turn off the sewing machine and unplug it from the power source.
2. Check if the presser foot is loose or misaligned. Tighten or realign it if necessary.
3. Inspect the presser foot for any signs of damage, such as bends or cracks. If it is damaged, replace it.
4. Check the presser foot lifter mechanism. Make sure it is functioning properly and not obstructed by any debris. Clean or replace it as necessary.

How To Fix Presser Foot On JANOME

Step-by-step instructions:

1. Turn off the sewing machine and unplug it from the power source.
2. Remove the presser foot from the machine.
3. Inspect the presser foot for any damage. If it is bent or damaged, replace it.
4. Check the presser foot holder for any signs of wear or damage. If it is worn or damaged, replace it.
5. Insert the new presser foot into the holder and tighten the screw to secure it.

JANOME sewing machine thread cutter problems

The thread cutter on the JANOME sewing machine may not cut the thread properly or may not work at all.

Causes of the JANOME Sewing machine thread cutter problems

1. Dull or damaged thread cutter blade.
2. Incorrectly installed thread cutter blade.
3. Misaligned thread cutter blade.
4. Dirt or debris interfering with the thread cutter.

Troubleshooting JANOME Sewing machine thread cutter problems

Step-by-step instructions:

• Turn off the sewing machine and unplug it from the power source.
• Remove the thread cutter blade from the machine and inspect it for damage or dullness. If it is damaged or dull, replace it.
• Check if the thread cutter blade is correctly installed. If it is not, reinstall it properly.
• Check the alignment of the thread cutter blade. Make sure it is aligned properly. Adjust it if necessary.
• Clean the thread cutter and make sure there is no dirt or debris interfering with it.

Hand wheel problems on JANOME sewing machine

The hand wheel on the JANOME sewing machine may be difficult to turn or may not turn at all.

Causes of the JANOME Sewing machine hand wheel problems

1. Thread jammed in the bobbin area.
2. Tangled or knotted thread.
3. Incorrectly inserted or damaged needle.
4. Loose or damaged hand wheel.

Troubleshooting JANOME Sewing machine hand wheel problems

Step-by-step instructions:

1. Turn off the sewing machine and unplug it from the power source.
2. Check the bobbin area for any jammed thread. Remove any jammed thread.
3. Cut any tangled or knotted thread and remove it.
4. Remove and reinsert the needle, making sure it is correctly inserted and not damaged.
5. Check the hand wheel for any looseness or damage. Tighten or replace it as necessary.

How To Fix JANOME Sewing Machine Handwheel

Step-by-step instructions:

1. Turn off the sewing machine and unplug it from the power source.
2. Remove the hand wheel from the machine.
3. Inspect the hand wheel for any signs of damage, such as cracks or breaks. If it is damaged, replace it.
4. Check the hand wheel for any looseness. Tighten the screw that holds it in place.
5. Reinstall the hand wheel onto the machine.

JANOME sewing machine Foot Pedal, Power Cord and Switch problems

The foot pedal, power cord, or switch on the JANOME sewing machine may not work properly.

Causes of the JANOME sewing machine Foot Pedal, Power Cord and Switch problems

1. Loose or damaged connection between the foot pedal and the machine.
2. Damaged power cord or switch.
3. Faulty foot pedal.

Troubleshooting JANOME sewing machine Foot Pedal, Power Cord and Switch problems

Step-by-step instructions:

1. Turn off the sewing machine and unplug it from the power source.
2. Check the connection between the foot pedal and the machine. Make sure it is securely connected.
3. Inspect the power cord for any signs of damage, such as cuts or breaks. If it is damaged, replace it.
4. Check the switch for any signs of damage. If it is damaged, replace it.
5. Test the foot pedal by plugging it in and pressing it down. If it does not work, it may be faulty and need to be replaced.

JANOME sewing machine Reverse Lever problems

The reverse lever on the JANOME sewing machine may not work or may be difficult to use.

Causes of the JANOME sewing machine Reverse Lever problems

1. Dirt or debris around the lever.
2. The lever is loose or broken.
3. Mechanical issues with the machine.

Troubleshooting JANOME sewing machine Reverse Lever problems

Step-by-step instructions:

1. Turn off the sewing machine and unplug it from the power source.
2. Clean the area around the reverse lever to remove any dirt or debris.
3. Check the lever for any looseness or damage. If it is loose, tighten it. If it is damaged, it may need to be replaced.
4. If the lever still does not work, there may be mechanical issues with the machine. It may need to be taken to a professional for repair.

JANOME sewing machine Spool Pin and Holder problems

The spool pin and holder on the JANOME sewing machine may be loose, missing, or not functioning properly.

Causes of the JANOME sewing machine Spool Pin and Holder problems

1. The spool pin or holder is loose or not inserted properly.
2. The spool pin or holder is missing.
3. Mechanical issues with the machine.

Troubleshooting JANOME sewing machine Spool Pin and Holder problems

Step-by-step instructions:

1. Turn off the sewing machine and unplug it from the power source.
2. Check the spool pin and holder for any looseness. If it is loose, tighten it.
3. Make sure the spool pin and holder are inserted correctly.
4. If the spool pin or holder is missing, it will need to be replaced.
5. If the issue persists, there may be mechanical issues with the machine. It may need to be taken to a professional for repair.

JANOME sewing machine Pattern Selector problems

The pattern selector on the JANOME sewing machine may not work or may be difficult to use.

Causes of the JANOME sewing machine Pattern Selector problems

1. Dirt or debris around the selector.
2. The selector is loose or broken.
3. Mechanical issues with the machine.

Troubleshooting JANOME sewing machine Pattern Selector problems

Step-by-step instructions:

1. Turn off the sewing machine and unplug it from the power source.
2. Clean the area around the pattern selector to remove any dirt or debris.
3. Check the selector for any looseness or damage. If it is loose, tighten it. If it is damaged, it may need to be replaced.
4. If the selector still does not work, there may be mechanical issues with the machine. It may need to be taken to a professional for repair.

JANOME sewing machine Stitch Length Adjustment problems

The stitch length adjustment isn’t working correctly or isn’t changing the stitch length at all.

Causes of the JANOME sewing machine Stitch Length Adjustment problems

1. Incorrect machine setting or stitch selector
2. Dust and debris accumulation
3. Broken or loose parts
4. Incorrect threading or tension
5. Mechanical or electrical issue with the machine

Troubleshooting JANOME sewing machine Stitch Length Adjustment problems

1. Check if the machine is set to the correct stitch type and if the stitch selector is set to the desired stitch length.
2. Turn off the machine and unplug it from the power source. Remove the needle and the presser foot.
3. Clean the machine’s interior and exterior thoroughly, paying special attention to the stitch length adjustment mechanism and surrounding area.
4. Check if any parts, such as the stitch length adjustment knob, are loose or broken. Tighten or replace them as necessary.
5. Rethread the machine and check the tension settings. Make sure they are correct for the type of fabric and thread being used.
6. Turn on the machine and test the stitch length adjustment again. If it still isn’t working, take the machine to a qualified technician for further inspection.

JANOME sewing machine Tension Disks problems

The machine’s tension is not holding correctly, causing uneven or loose stitches.

Causes of the JANOME sewing machine Tension Disks problems

1. Dust and debris accumulation
2. Incorrect threading
3. Damaged or worn-out tension disks
4. Mechanical or electrical issue with the machine

Troubleshooting JANOME sewing machine Tension Disks problems

1. Turn off the machine and unplug it from the power source. Remove the needle and the presser foot.
2. Clean the machine’s interior and exterior thoroughly, paying special attention to the tension disks and surrounding area.
3. Rethread the machine, making sure the thread is properly seated in the tension disks and the thread guides.
4. Adjust the tension settings to the correct setting for the type of fabric and thread being used.
5. Turn on the machine and test the tension by sewing a few test stitches. Adjust the tension as necessary.
6. If the tension still isn’t holding correctly, the tension disks may be damaged or worn-out and need to be replaced. Take the machine to a qualified technician for further inspection.

JANOME sewing machine Needle Clamp problems

The needle clamp isn’t holding the needle securely or is preventing the needle from being inserted or removed.

Causes of the JANOME sewing machine Needle Clamp problems

1. Build-up of dirt or debris in the clamp
2. Loose or damaged clamp
3. Incorrect insertion of the needle

Troubleshooting JANOME sewing machine Needle Clamp problems

1. Turn off the machine and unplug it from the power source. Remove the needle and the presser foot.
2. Check the needle clamp for any visible signs of damage or looseness. If it’s loose or damaged, it may need to be tightened or replaced.
3. Clean the needle clamp and surrounding area thoroughly, removing any dirt or debris.
4. Reinsert the needle according to the machine’s instructions, making sure it’s inserted correctly and all the way up into the clamp.
5. Tighten the clamp securely over the needle.
6. Turn on the machine and test the needle by sewing a few test stitches. If the problem persists, take the machine to a qualified technician for further inspection.

JANOME sewing machine Take-Up Lever problems

The take-up lever on a JANOME sewing machine may not move or may get stuck, making it difficult or impossible to sew.

Causes of the JANOME sewing machine Take-Up Lever problems

1. Dirt or debris buildup in the take-up lever mechanism
2. Lack of lubrication in the take-up lever mechanism
3. Misalignment of the take-up lever

Troubleshooting JANOME sewing machine Take-Up Lever problems

1. Turn off the machine and unplug it from the power source.
2. Open the needle plate and remove the bobbin case.
3. Clean the area around the take-up lever with a soft brush or cloth to remove any dirt or debris.
4. Apply a drop of sewing machine oil to the take-up lever mechanism and move the lever up and down to distribute the oil.
5. Check the alignment of the take-up lever and adjust it if necessary. Refer to the machine’s manual for instructions on how to do this.
6. Replace the bobbin case and needle plate.
7. Plug in the machine and turn it on.
8. Test the machine by sewing on a piece of scrap fabric to make sure the take-up lever moves smoothly.

JANOME sewing machine Presser Dial problems

The presser dial on a JANOME sewing machine may not turn or may be difficult to turn, preventing proper adjustment of the presser foot pressure.

Causes of the JANOME sewing machine Presser Dial problems

1. Dirt or debris buildup around the presser dial
2. Lack of lubrication in the presser dial mechanism
3. Misalignment of the presser dial

Troubleshooting JANOME sewing machine Presser Dial problems

1. Turn off the machine and unplug it from the power source.
2. Clean the area around the presser dial with a soft brush or cloth to remove any dirt or debris.
3. Apply a drop of sewing machine oil to the presser dial mechanism and turn the dial back and forth to distribute the oil.
4. Check the alignment of the presser dial and adjust it if necessary. Refer to the machine’s manual for instructions on how to do this.
5. Plug in the machine and turn it on.
6. Test the machine by adjusting the presser foot pressure using the presser dial to make sure it turns smoothly.

JANOME sewing machine Feed Dog problems

The feed dogs on a JANOME sewing machine may not move or may be difficult to move, preventing proper fabric feeding during sewing.

Causes of the JANOME sewing machine Feed Dog problems

1. Dirt or debris buildup around the feed dogs
2. Lack of lubrication in the feed dog mechanism
3. Misalignment of the feed dogs

Troubleshooting JANOME sewing machine Feed Dog problems

1. Turn off the machine and unplug it from the power source.
2. Open the needle plate and remove the bobbin case.
3. Clean the area around the feed dogs with a soft brush or cloth to remove any dirt or debris.
4. Apply a drop of sewing machine oil to the feed dog mechanism and move the feed dogs up and down to distribute the oil.
5. Check the alignment of the feed dogs and adjust them if necessary. Refer to the machine’s manual for instructions on how to do this.
6. Replace the bobbin case and needle plate.
7. Plug in the machine and turn it on.
8. Test the machine by sewing on a piece of scrap fabric to make sure the feed dogs move smoothly and feed the fabric properly.

JANOME sewing machine Throat Plate problems

The throat plate, which is the metal plate under the needle, may become damaged, warped or bent. This can cause fabric to get stuck or the needle to break.

Causes of the JANOME sewing machine Throat Plate problems

1. Misaligned needle
2. Using the wrong type or size of needle
3. Incorrectly installed throat plate
4. Accidentally hitting the throat plate with the needle or other objects
5. Regular wear and tear

Troubleshooting JANOME sewing machine Throat Plate problems

1. Turn off the sewing machine and unplug it from the power source.
2. Remove the presser foot, needle and bobbin from the machine.
3. Use a screwdriver to remove the screws that hold the throat plate in place.
4. Gently lift the throat plate out of the machine and inspect it for damage or warping.
5. If the throat plate is damaged, replace it with a new one that is compatible with your machine model.
6. If the throat plate is simply bent, use pliers to carefully bend it back into shape.
7. Check that the needle is correctly installed and not hitting the throat plate.
8. Replace the screws to secure the new or repaired throat plate in place.
9. Reinstall the needle, presser foot and bobbin.
10. Plug in the machine and turn it on. Test sew on scrap fabric to ensure the problem is resolved.

JANOME sewing machine Sewing Light problems

The sewing machine’s light is not working, making it difficult to see the fabric while sewing.

Causes of the JANOME sewing machine Sewing Light problems

1. Burnt out bulb
2. Loose or disconnected wiring
3. Faulty switch
4. Electrical issue

Troubleshooting JANOME sewing machine Sewing Light problems

1. Turn off the sewing machine and unplug it from the power source.
2. Use a small screwdriver to remove the screws that hold the light cover in place.
3. Remove the light cover to access the bulb.
4. Check the bulb to see if it is burnt out or damaged. If it is, replace it with a new bulb of the same type and wattage.
5. Check the wiring that connects the light to the machine. Make sure all connections are secure and not frayed or damaged.
6. Check the switch that controls the light. Press it to see if it is functioning properly.
7. If the wiring or switch is faulty, contact a professional technician for repair or replacement.
8. If there are no visible issues with the light or wiring, check the power source to ensure there is electricity reaching the machine.
9. Replace the light cover and screws.
10. Plug in the machine and turn it on. Test sew on scrap fabric to ensure the problem is resolved.

JANOME sewing machine Presser Foot Lever problems

The presser foot lever on a JANOME sewing machine may become loose, making it difficult to raise or lower the presser foot.

Causes of the JANOME sewing machine Presser Foot Lever problems

1. The presser foot lever may be damaged.
2. The presser foot may be installed incorrectly.
3. The presser foot lever screw may be loose.

Troubleshooting JANOME sewing machine Presser Foot Lever problems

Step-by-step instructions:

1. Turn off the machine and unplug it from the power source.
2. Remove the presser foot by loosening the screw that holds it in place.
3. Inspect the presser foot lever and the screw that attaches it to the machine. Tighten the screw if it is loose.
4. Check the presser foot to ensure that it is installed correctly.
5. Test the presser foot lever to see if it moves freely. If it is still tight, proceed to the next step.
6. Remove the presser foot lever cover by unscrewing it from the machine.
7. Use a screwdriver to tighten the screw that secures the presser foot lever to the machine.
8. Reassemble the presser foot lever cover and test the lever again.

JANOME sewing machine Slide Plate problems

The slide plate on a JANOME sewing machine may become stuck or difficult to remove.

Causes of the JANOME sewing machine Slide Plate problems

1. The slide plate may be dirty or have debris stuck in it.
2. The slide plate may be warped or damaged.
3. The slide plate may be installed incorrectly.

Troubleshooting JANOME sewing machine Slide Plate problems

Step-by-step instructions:

1. Turn off the machine and unplug it from the power source.
2. Locate the slide plate on the machine and remove it from the machine.
3. Inspect the slide plate for dirt, debris, or damage. Clean the slide plate if it is dirty or has debris stuck in it.
4. Test the slide plate by sliding it back and forth to see if it moves freely. If it is still stuck, proceed to the next step.
5. Inspect the slide plate for warping or damage. If it is damaged, it may need to be replaced.
6. Ensure that the slide plate is installed correctly by following the instructions in the user manual.
7. Reinstall the slide plate and test it again. If it still does not move freely, the machine may need to be serviced by a professional.

JANOME sewing machine Bobbin Case problems

The bobbin case holds the bobbin and is located under the needle plate. If the bobbin case is not functioning properly, it can cause thread jams, skipped stitches, and other sewing problems.

Causes of the JANOME sewing machine Bobbin Case problems

1. Dirt or debris in the bobbin case
2. Damage to the bobbin case
3. Incorrect installation of the bobbin case
4. Worn out or damaged bobbin case spring

Troubleshooting JANOME sewing machine Bobbin Case problems

1. Turn off your sewing machine and unplug it from the power source.
2. Remove the needle plate to access the bobbin case.
3. Remove the bobbin and bobbin case from the machine.
4. Clean the bobbin case and surrounding area using a soft brush or lint roller to remove any dirt or debris.
5. Inspect the bobbin case for any signs of damage such as cracks, chips, or missing pieces.
6. Reinstall the bobbin case, making sure it is inserted correctly and snaps into place.
7. Test the machine by sewing on a scrap piece of fabric to make sure the bobbin case is working properly.

JANOME sewing machine Bobbin problems

The bobbin is a small spool of thread that is located under the needle plate. If the bobbin is not functioning properly, it can cause thread jams, skipped stitches, and other sewing problems.

Causes of the JANOME sewing machine Bobbin problems

1. Incorrectly wound or placed bobbin
2. Wrong type or size of bobbin
3. Dirty or damaged bobbin
4. Incorrect tension on the bobbin thread

Troubleshooting JANOME sewing machine Bobbin problems

1. Turn off your sewing machine and unplug it from the power source.
2. Remove the needle plate to access the bobbin.
3. Remove the bobbin and check to make sure it is wound correctly and placed in the bobbin case correctly.
4. Check the type and size of the bobbin to make sure it is the correct one for your machine.
5. Inspect the bobbin for any signs of dirt, damage or wear and replace it if necessary.
6. Adjust the tension on the bobbin thread according to your machine’s manual.
7. Reinstall the bobbin and the needle plate, and test the machine by sewing on a scrap piece of fabric to make sure the bobbin is working properly.

10 Common Problems with JANOME Sewing Machines

In addition to the common problems listed above, JANOME sewing machines can also experience the following issues:

1. Stitch Problems
2. Upper thread breaking
3. Breaking needles problems
4. Bobbin winding problems
5. Bobbin thread problems
6. Bobbin holder problems
7. Bobbin tension problems
8. Sewing Machine Keep Jamming
9. Tension problems
10. Sewing machine not feeding fabric

FAQ

What are the most commonly replaced parts on a JANOME sewing machine?

The most commonly replaced parts on a JANOME sewing machine are the needle, bobbin, bobbin case, presser feet, and throat plate.

How do I know if I need to replace my sewing machine needle?

You should replace your sewing machine needle if it becomes dull, bent, or broken. It is also recommended to replace your needle after 8-10 hours of sewing or after completing a large project.

Can I use generic bobbins with my JANOME sewing machine?

While it is possible to use generic bobbins with a JANOME sewing machine, it is recommended to use genuine JANOME bobbins for the best performance and to avoid potential issues.

How often should I clean and oil my JANOME sewing machine?

You should clean and oil your JANOME sewing machine after every 8-10 hours of use or after completing a large project. Regular maintenance will help keep your machine running smoothly.

What should I do if my presser foot is not holding fabric properly?

If your presser foot is not holding fabric properly, make sure it is properly attached and tightened. You may also need to adjust the presser foot pressure or replace the presser foot if it is worn or damaged.

Conclusion. Troubleshooting JANOME Sewing machine parts

By troubleshooting the various parts of your JANOME sewing machine, you can save yourself time, money, and frustration. With proper maintenance and care, your machine can last for many years and provide you with reliable service.

If you encounter any problems, refer to the troubleshooting guide provided by the manufacturer, and don’t hesitate to seek professional help if necessary. By following these tips, you can keep your JANOME sewing machine running smoothly and enjoy creating beautiful projects for many years to come.