BERNETTE Sewing Machine Bobbin Tension Problems

Are you having trouble with your BERNETTE Sewing Machine bobbin tension? If so, you are not alone. Many sewers have experienced this issue and have had difficulty finding a solution. This article will provide an overview of the common causes of bobbin tension problems and offer tips on how to fix them.

Common Causes of Bernette Sewing Machine Bobbin Tension Problems

Incorrect threading of the bobbin
Improperly wound bobbin

Incorrect bobbin type
Bobbin tension too tight
Bobbin tension too loose

Needle not properly inserted
Needle not the correct size
Needle not properly positioned

Thread not properly inserted
Thread not the correct type for a Bernette machine

Here you can find all the 
parts and accessories for the BERNETTE Sewing Machine
guaranteed to fit your sewing machine

Troubleshooting BERNETTE Sewing Machine Bobbin Tension Problems

This section will provide an overview of the common causes of bobbin tension problems in BERNETTE sewing machines, as well as detailed instructions on how to troubleshoot and resolve them.

Incorrect Threading of the Bernette Bobbin

Incorrect threading of the bobbin is a common issue when using a Bernette sewing machine. This issue can cause the machine to jam, the thread to break, or the stitches to be uneven. Fortunately, it is easy to fix this issue with a few simple steps.

Examples of Incorrect Threading

Threading the bobbin incorrectly
Threading the bobbin in the wrong direction

Threading the bobbin too tightly
Threading the bobbin too loosely

Step-by-Step Instructions for Fixing Incorrect Threading of the Bernette Bobbin

Remove the bobbin from the machine.

Check the bobbin for any signs of damage or wear.
If the bobbin is damaged, replace it with a new one.
Thread the bobbin correctly, following the instructions in the Bernette manual.

Make sure the thread is not too tight or too loose.
Place the bobbin back into the machine.
Test the machine to make sure the threading is correct.

By following these steps, you should be able to fix any incorrect threading of the Bernette bobbin. If the issue persists, it may be necessary to take the machine to a professional for further inspection.

Improperly Wound Bobbin on a Bernette Sewing Machine

A bobbin is an essential part of a sewing machine, as it holds the thread that is used to stitch fabric together. If the bobbin is not wound properly, it can cause a variety of problems, such as thread tangling, skipped stitches, and uneven tension. Fortunately, it is easy to fix an improperly wound bobbin on a Bernette sewing machine.

Step-by-Step Instructions

Remove the bobbin from the machine. To do this, open the bobbin cover and press the bobbin release button.

Check the bobbin for any signs of damage. If the bobbin is cracked or otherwise damaged, it should be replaced.
Place the bobbin onto the bobbin winder. Make sure the bobbin is facing the correct direction, with the thread coming off the top.
Press the bobbin winder lever to start winding the bobbin. The thread should be wound in a clockwise direction.

When the bobbin is full, press the bobbin winder lever again to stop winding. Cut the thread and remove the bobbin from the winder.
Place the bobbin back into the machine. Make sure the thread is coming off the top of the bobbin and the bobbin is facing the correct direction.
Close the bobbin cover and press the bobbin release button to secure the bobbin in place.

Examples of Improperly Wound Bobbins

An improperly wound bobbin can cause a variety of problems, such as:

Thread tangling

Incorrect Bobbin Type on a Bernette Sewing Machine

Using the wrong bobbin type on a Bernette sewing machine can cause a variety of problems, from skipped stitches to thread jams.

It is important to use the correct bobbin type for your Bernette sewing machine in order to ensure that your machine runs smoothly and your projects turn out perfectly.

Examples of Incorrect Bobbin Types

The most common incorrect bobbin types used on Bernette sewing machines are Class 15, Class 66, and Class A. Class 15 bobbins are typically used on Singer machines, Class 66 bobbins are typically used on Brother machines, and Class A bobbins are typically used on Janome machines.

Step-by-Step Instructions for Fixing Incorrect Bobbin Type

Unplug the Bernette sewing machine from the power source.

Open the bobbin case and remove the bobbin.
Check the bobbin type to make sure it is the correct type for your Bernette sewing machine.
If the bobbin type is incorrect, replace it with the correct type.

Replace the bobbin in the bobbin case and close the case.
Plug the Bernette sewing machine back into the power source.
Test the machine to make sure it is working properly.

Using the correct bobbin type for your Bernette sewing machine is essential for ensuring that your machine runs smoothly and your projects turn out perfectly. If you are unsure of the correct bobbin type for your Bernette sewing machine, consult your owner’s manual or contact the manufacturer for assistance.

Bobbin Tension Too Tight: How to Fix it with a Bernette Sewing Machine

Bobbin tension that is too tight can cause a variety of problems with your sewing machine, including skipped stitches, uneven stitches, and thread breakage. Fortunately, it is relatively easy to adjust the bobbin tension on a Bernette sewing machine. Here are the steps to follow to fix bobbin tension that is too tight.

Step 1: Prepare the Machine

Turn off the machine and unplug it from the power source.

Remove the bobbin case from the machine.
Remove the bobbin from the bobbin case.

Step 2: Adjust the Bobbin Tension

The bobbin tension is adjusted by turning the small screw on the bobbin case.

To loosen the tension, turn the screw counterclockwise.
To tighten the tension, turn the screw clockwise. It is important to make small adjustments and test the tension after each adjustment.
To test the tension, hold the bobbin case in one hand and the bobbin in the other.

Pull the thread gently and the bobbin should move slightly. If the bobbin does not move, the tension is too tight.
If the bobbin moves too much, the tension is too loose.

Step 3: Reassemble the Machine

Replace the bobbin in the bobbin case.

Replace the bobbin case in the machine.
Plug the machine into the power source and turn it on.

Step 4: Test the Tension

Bobbin Tension Too Loose: How to Fix it on a Bernette Sewing Machine

Bobbin tension that is too loose can cause a variety of problems with your sewing machine, including skipped stitches, uneven stitches, and thread bunching. Fortunately, it is relatively easy to fix this issue on a Bernette sewing machine.

Examples of Bobbin Tension Too Loose

When the bobbin tension is too loose, you may notice the following issues:

Skipped stitches
Uneven stitches

Thread bunching
Thread loops on the underside of the fabric

Step-by-Step Instructions for Fixing Bobbin Tension Too Loose on a Bernette Sewing Machine

Remove the bobbin case from the machine. To do this, open the bobbin cover and remove the bobbin.

Locate the bobbin tension screw on the bobbin case. It is usually located near the bobbin holder.
Using a small screwdriver, turn the bobbin tension screw clockwise to tighten the tension. Turn it only a small amount at a time, and test the tension after each adjustment.
Once the tension is correct, re-insert the bobbin case into the machine and test the stitches.

If you are still having issues with the bobbin tension, you may need to take your Bernette sewing machine to a professional for further assistance.

Here you can find all the 
parts and accessories for the BERNETTE Sewing Machine
guaranteed to fit your sewing machine

Needle Not Properly Inserted on Bernette Sewing Machines

When using a Bernette sewing machine, it is important to ensure that the needle is properly inserted. If the needle is not properly inserted, it can cause a variety of problems, including skipped stitches, broken needles, and uneven stitching. Fortunately, it is easy to fix this issue.

Examples of Needle Not Properly Inserted

Needle is not inserted all the way into the needle clamp.

Needle is inserted at an angle.
Needle is not inserted into the correct position.

Step-by-Step Instructions for Fixing Needle Not Properly Inserted on Bernette Sewing Machines

Turn off the machine and unplug it from the power source.

Remove the needle from the machine.
Check the needle for any signs of damage or wear.
If the needle is damaged or worn, replace it with a new one.

Insert the needle into the needle clamp, making sure it is inserted all the way.
Tighten the needle clamp screw securely.
Check to make sure the needle is inserted in the correct position.

Plug the machine back into the power source and turn it on.
Test the machine by sewing a few stitches.

By following these steps, you should be able to fix the issue of the needle not being properly inserted on your Bernette sewing machine. If the issue persists, it is recommended that you contact a professional for assistance

Needle Not the Correct Size: How to Fix It with a Bernette Sewing Machine

Having the wrong size needle in your Bernette sewing machine can cause a variety of problems, from skipped stitches to fabric damage. Fortunately, it’s easy to fix this issue by replacing the needle with the correct size.

Examples of Needle Size Problems

Using a needle that is too small for the fabric can cause skipped stitches and fabric damage.
Using a needle that is too large for the fabric can cause skipped stitches, fabric damage, and thread breakage.

Step-by-Step Instructions for Replacing the Needle

Turn off the Bernette sewing machine and unplug it from the power source.
Raise the needle to its highest position by turning the hand wheel towards you.
Loosen the needle clamp screw and remove the old needle.

Insert the new needle into the needle clamp with the flat side of the needle facing the back of the machine.
Tighten the needle clamp screw.
Lower the needle to its lowest position by turning the hand wheel away from you.

Plug the Bernette sewing machine back into the power source and turn it on.

By following these steps, you can easily replace the needle in your Bernette sewing machine with the correct size. This will help ensure that your sewing projects turn out perfectly every time.

Needle Not Properly Positioned on Bernette Sewing Machines

When using a Bernette sewing machine, it is important to ensure that the needle is properly positioned. If the needle is not properly positioned, it can cause skipped stitches, uneven stitches, and other problems with the sewing machine. In this article, we will discuss what causes the needle to be improperly positioned, how to fix it, and how to prevent it from happening in the future.

What Causes the Needle to be Improperly Positioned?

There are several factors that can cause the needle to be improperly positioned on a Bernette sewing machine. These include:

Incorrect threading of the needle
Incorrect tension settings

Incorrect needle size
Incorrect needle type
Incorrect needle position

How to Fix an Improperly Positioned Needle

If the needle is not properly positioned on your Bernette sewing machine, there are several steps you can take to fix it. These include:

Check the threading of the needle. Make sure the thread is properly threaded through the needle and the tension settings are correct.
Check the needle size and type. Make sure the needle is the correct size and type for the fabric you are using.

Check the needle position. Make sure the needle is in the correct position for the fabric you are using.
Adjust the needle position. If the needle is not in the correct position, adjust it until it is.
Test the needle position.

Here you can find all the 
parts and accessories for the BERNETTE Sewing Machine
guaranteed to fit your sewing machine

Thread Not Properly Inserted: What to Do?

Thread not properly inserted is a common problem when using a Bernette sewing machine. It can be caused by a number of factors, including incorrect threading, tension settings, or a damaged needle. Fortunately, it is usually easy to fix with a few simple steps.

Examples of Thread Not Properly Inserted

Thread is not visible on the underside of the fabric.
Thread is visible on the underside of the fabric, but is not forming a stitch.

Thread is visible on the underside of the fabric, but is forming a loopy stitch.

Step-by-Step Instructions for Fixing Thread Not Properly Inserted on a Bernette Sewing Machine

Check the threading of the machine. Make sure the thread is properly inserted through the tension discs and the take-up lever.
Check the tension settings. Make sure the tension is set correctly for the type of fabric and thread you are using.

Check the needle. Make sure the needle is not damaged or bent, and that it is the correct size and type for the fabric and thread you are using.
If the thread is still not properly inserted, try re-threading the machine. Make sure the thread is properly inserted through the tension discs and the take-up lever.
If the problem persists, try changing the needle. Make sure the needle is the correct size and type for the fabric and thread you are using.

If the problem still persists, try changing the thread. Make sure the thread is the correct type and weight for the fabric you are using.Thread Not the Correct Type: Bernette Output FormatWhen using a Bernette sewing machine, it is important to make sure that the thread is the correct type for the project. If the wrong type of thread is used, it can cause problems with the stitching, such as skipped stitches, uneven tension, and poor stitch quality. In this article, we will discuss what to do if you find that the thread is not the correct type for your Bernette sewing machine.

Examples of Thread Not the Correct Type

There are several types of thread that can be used in a Bernette sewing machine, including cotton, polyester, and nylon. If you are using a thread that is not the correct type for your project, it can cause problems with the stitching.

For example, if you are using a cotton thread on a project that requires a polyester thread, the stitches may be uneven and the tension may be off.

Additionally, if you are using a nylon thread on a project that requires a cotton thread, the stitches may be too tight and the thread may break.

Step-by-Step Instructions for Fixing Thread Not the Correct Type

Check the thread type that is recommended for your project. This information can usually be found in the pattern instructions or on the thread label.
If the thread type is not the correct type for your project, remove the thread from the machine and replace it with the correct type.

Make sure that the thread is properly threaded through the machine. Refer to the Bernette sewing machine manual for instructions on how to thread the machine.
Test the machine by stitching a few stitches on a scrap piece of fabric. Make sure that the tension is correct and that the stitches are even.
If the stitches are still

Tips for Preventing BERNETTE Sewing Machine Bobbin Tension Problems

Check the Bobbin

Make sure the bobbin is the correct size and type for your machine.
Check the bobbin for any damage or wear.
Ensure the bobbin is wound evenly and not too tightly.

Clean the Bobbin Case

Remove the bobbin case and clean it with a soft cloth.
Check for any lint or debris that may be blocking the tension spring.
Make sure the tension spring is not bent or damaged.

Adjust the Bobbin Tension

Adjust the bobbin tension according to the manufacturer’s instructions.
Test the tension by pulling the thread from the bobbin case. The thread should be slightly taut, but not too tight.
If the tension is too tight, loosen the tension screw slightly.

Regular Maintenance

Regularly clean and oil your machine according to the manufacturer’s instructions.
Check the bobbin tension regularly and adjust as needed.
Replace the bobbin case if it is worn or damaged.

Using the Machine Properly

Always use the correct needle and thread for the fabric you are sewing.
Do not pull or tug on the fabric while sewing.

Here you can find all the 
parts and accessories for the BERNETTE Sewing Machine
guaranteed to fit your sewing machine

10 Common Problems with BERNETTE Sewing Machines

In addition to the common problems listed above, BERNETTE sewing machines can also experience the following issues:

Sewing machine not feeding fabric

FAQ

What is bobbin tension?

Bobbin tension is the amount of tension applied to the thread as it passes through the bobbin case. It is important to have the correct tension in order to ensure that the stitches are even and the fabric is not pulled too tightly.

What causes bobbin tension problems?

Bobbin tension problems can be caused by a variety of factors, including:

Incorrect threading of the bobbin case
Incorrect tension settings
Worn or damaged parts

Incorrect needle size
Incorrect thread type

How can I fix bobbin tension problems?

The best way to fix bobbin tension problems is to first check the threading of the bobbin case and make sure it is correct. Then, check the tension settings and make sure they are correct for the type of fabric you are using. If the tension settings are correct, then check for any worn or damaged parts and replace them if necessary. Finally, make sure you are using the correct needle size and thread type for the fabric you are working with.

What should I do if I can’t fix the bobbin tension problems?

If you are unable to fix the bobbin tension problems, it is best to take your Bernette sewing machine to a qualified technician for repair. They will be able to diagnose the problem and make any necessary repairs.

Conclusion

In conclusion, Bernette sewing machine bobbin tension problems can be a frustrating issue to deal with. However, with the right knowledge and tools, it is possible to troubleshoot and fix the problem. First, check the bobbin tension by using a bobbin tension gauge. If the tension is too tight, loosen it by adjusting the tension screw. If the tension is too loose, tighten it by turning the tension screw. If the tension is still off, check the bobbin case for any dirt or debris that may be causing the problem. Finally, if all else fails, take the machine to a professional for servicing.

By following these steps, you can ensure that your Bernette sewing machine is running smoothly and that your bobbin tension is set correctly. With the right knowledge and tools, you can troubleshoot and fix any bobbin tension problems you may have.