by

Husqvarna Viking 1250 Common Problems and Troubleshooting

Welcome to our guide on troubleshooting common problems with the Husqvarna Viking 1250 sewing machine. If you own this advanced model, you might encounter issues during your sewing projects. In this article, we’ll explore potential problems and provide solutions to ensure your sewing experience remains smooth and enjoyable.

Causes of Common Problems with the Husqvarna Viking 1250

In this section, we will delve into specific issues that users may face with the Husqvarna Viking 1250 sewing machine. From product details to computerized functionalities, we’ll address each aspect, offering insights into potential causes and troubleshooting steps.

Here you can find all the 
parts and accessories for the Husqvarna Viking 1250
guaranteed to fit your sewing machine

25 Common Problems and Troubleshooting for the Husqvarna Viking 1250 Embroidery Machine

Machine not turning on

  • Description: The machine does not respond when attempting to power it on.
  • Cause: Power connection issues, blown fuse, or malfunctioning power switch.
  • Troubleshooting:
    1. Check the power cord connection to ensure it’s securely plugged into a functioning outlet.
    2. Inspect the power cord for any signs of damage and replace if necessary.
    3. Verify if the fuse in the power plug is intact and replace if blown.
    4. Test the power switch by trying it with a different appliance or consult a technician for repair.

Needle breaking during embroidery

  • Description: The needle breaks while embroidering designs.
  • Cause: Incorrect needle type or size, tangled threads, or improper thread tension.
  • Troubleshooting:
    1. Ensure you are using the correct needle type and size for the fabric and thread being used.
    2. Check for any thread tangles or knots in the bobbin area and rethread the machine.
    3. Adjust the thread tension according to the machine’s manual for the specific embroidery design.

Thread bunching underneath the fabric

  • Description: The thread forms loops or bunches on the underside of the fabric.
  • Cause: Incorrect threading, bobbin tension issues, or dirty machine.
  • Troubleshooting:
    1. Rethread the machine following the threading guide carefully.
    2. Adjust the tension of the bobbin thread using the tension adjustment screw.
    3. Clean the bobbin area and remove any lint or debris that may be causing the issue.

Machine skipping stitches

  • Description: The machine skips stitches or produces uneven stitches.
  • Cause: Dull or bent needle, incorrect needle threading, or machine timing issues.
  • Troubleshooting:
    1. Replace the needle with a new, sharp one appropriate for the fabric being sewn.
    2. Check the needle threading to ensure it follows the correct path and is properly tensioned.
    3. If the issue persists, consult a technician to inspect and adjust the machine’s timing.

Error message “Thread breakage detected”

  • Description: The machine displays an error message indicating thread breakage.
  • Cause: Actual thread breakage or sensor malfunction.
  • Troubleshooting:
    1. Check the thread path for any snags or tangles that may cause breakage.
    2. Ensure the thread is properly seated in the tension discs and guide.
    3. If no breakage is detected, the sensor may be malfunctioning, requiring professional repair.

Uneven tension between top and bobbin threads

  • Description: Tension between the top and bobbin threads is noticeably different, causing puckering or looping.
  • Cause: Improper tension settings or damaged tension mechanisms.
  • Troubleshooting:
    1. Adjust the tension settings on both the top and bobbin threads to achieve balanced tension.
    2. Clean and lubricate the tension mechanisms according to the machine’s manual.
    3. If the issue persists, seek professional servicing to repair or replace damaged tension components.

Machine making loud noises

  • Description: The machine emits unusual or loud noises during operation.
  • Cause: Loose or damaged components, debris in the machine, or lack of lubrication.
  • Troubleshooting:
    1. Check for loose screws or parts and tighten as necessary.
    2. Remove any debris or foreign objects from the machine’s interior.
    3. Lubricate the moving parts of the machine according to the manufacturer’s recommendations.

Error message “Bobbin thread low”

  • Description: The machine displays a warning indicating low bobbin thread.
  • Cause: Insufficient bobbin thread, improper bobbin installation, or sensor malfunction.
  • Troubleshooting:
    1. Replace the bobbin with a new one containing an adequate amount of thread.
    2. Ensure the bobbin is properly inserted into the bobbin case and seated correctly.
    3. If the issue persists despite a full bobbin, the sensor may be faulty and require professional attention.

Needle not moving up or down

  • Description: The needle fails to move up or down when commanded.
  • Cause: Mechanical obstruction, electrical malfunction, or motor failure.
  • Troubleshooting:
    1. Check for any obstructions in the needle bar or presser foot mechanism and remove them.
    2. Test the machine with different stitch settings to determine if the issue is specific to certain functions.
    3. If the needle still does not move, consult a technician to diagnose and repair the electrical or mechanical components.
Here you can find all the 
parts and accessories for the Husqvarna Viking 1250
guaranteed to fit your sewing machine
  1. Error message “Machine overheating”
    • Description: The machine displays a warning indicating overheating.
    • Cause: Extended use without sufficient cooling breaks, blocked ventilation, or malfunctioning cooling system.
    • Troubleshooting:
    1. Turn off the machine and allow it to cool down for an appropriate period before resuming use.
    2. Ensure the machine’s ventilation openings are not blocked by fabric or other obstructions.
    3. If the issue persists, consult a technician to inspect and repair the cooling system components.
  2. Thread tension discs not gripping thread
    • Description: The tension discs fail to grip the thread properly, resulting in loose stitches or thread bunching.
    • Cause: Dirt or debris buildup in the tension discs, worn tension discs, or improper threading.
    • Troubleshooting:
    1. Clean the tension discs using a lint-free cloth and mild cleaning solution, if necessary.
    2. Inspect the tension discs for signs of wear and replace them if damaged.
    3. Ensure the thread is correctly threaded through the tension discs and guides according to the machine’s manual.
  3. Error message “Machine out of calibration”
    • Description: The machine displays a calibration error, indicating a misalignment or calibration issue.
    • Cause: Mechanical misalignment, sensor malfunction, or software glitch.
    • Troubleshooting:
    1. Restart the machine to see if the error clears after a power cycle.
    2. Check for any physical misalignments or obstructions in the machine’s moving parts.
    3. If the issue persists, consult the machine’s manual for calibration instructions or contact technical support for assistance.
  4. Inconsistent embroidery stitch quality
    • Description: Embroidery stitches vary in quality or appearance, resulting in uneven designs.
    • Cause: Incorrect design settings, tension issues, or fabric movement during stitching.
    • Troubleshooting:
    1. Review the design settings and ensure they are compatible with the selected fabric and thread.
    2. Check the tension settings for both the top and bobbin threads and adjust as needed.
    3. Secure the fabric firmly in place to prevent movement during embroidery,
    using appropriate stabilizers if necessary.
  5. Error message “Thread jam detected”
    • Description: The machine detects a thread jam or obstruction in the thread path.
    • Cause: Thread tangle, debris in the thread path, or sensor malfunction.
    • Troubleshooting:
    1. Stop the machine immediately and inspect the thread path for any tangles or knots.
    2. Remove any debris or lint from the thread path using compressed air or a small brush.
    3. If the issue persists, the sensor responsible for detecting thread jams may be faulty and require professional repair.
  6. Machine freezing or becoming unresponsive
    • Description: The machine freezes or becomes unresponsive during operation.
    • Cause: Software glitch, electrical malfunction, or memory overload.
    • Troubleshooting:
    1. Turn off the machine and disconnect it from power for a few minutes, then restart.
    2. Check for any software updates or patches available from the manufacturer.
    3. If the issue persists, consult technical support for further assistance or consider professional servicing.
  7. Error message “Needle position sensor error”
    • Description: The machine displays an error related to the needle position sensor.
    • Cause: Sensor malfunction, electrical wiring issues, or mechanical misalignment.
    • Troubleshooting:
    1. Restart the machine to see if the error clears after a power cycle.
    2. Check the electrical connections and wiring associated with the needle position sensor for any damage or loose connections.
    3. If the issue persists, consult a technician to diagnose and repair the sensor or associated components.
  8. Machine not recognizing embroidery hoop
    • Description: The machine fails to detect the embroidery hoop or displays an error related to hoop recognition.
    • Cause: Improper hoop installation, sensor malfunction, or dirty contacts.
    • Troubleshooting:
    1. Ensure the embroidery hoop is securely attached to the machine and properly aligned.
    2. Clean the contacts on both the machine and the embroidery hoop using a dry, lint-free cloth.
    3. If the issue persists, the hoop recognition sensor may be faulty and require professional attention.
  9. Error message “Bobbin winding error”
    • Description: The machine indicates an error related to bobbin winding.
    • Cause: Improper bobbin winding technique, bobbin winding mechanism malfunction, or sensor issue.
    • Troubleshooting:
    1. Ensure the bobbin is inserted correctly into the bobbin winding mechanism and engaged properly.
    2. Review the bobbin winding instructions in the machine’s manual and ensure proper technique.
    3. If the issue persists, consult technical support for further assistance or consider professional servicing.
  10. Machine running too slowly
    • Description: The machine operates at a significantly slower speed than usual.
    • Cause: Motor issues, mechanical obstruction, or software settings.
    • Troubleshooting:
    1. Check for any mechanical obstructions in the machine’s moving parts and remove them.
    2. Verify the machine’s speed settings and adjust if necessary.
    3. If the issue persists, the motor may be malfunctioning and require professional repair or replacement.
  11. Error message “Thread cutter malfunction”
    • Description: The machine indicates a problem with the thread cutter function.
    • Cause: Blunt or damaged thread cutter blade, mechanical obstruction, or sensor malfunction.
    • Troubleshooting:
    1. Inspect the thread cutter blade for any damage or dullness and replace if necessary.
    2. Check for any thread or debris obstructing the movement of the thread cutter mechanism and remove it.
    3. If the issue persists, the sensor responsible for detecting thread cutter activation may be faulty and require professional repair.
  12. Machine not feeding fabric smoothly
    • Description: The machine struggles to feed fabric smoothly, resulting in uneven stitching or fabric jams.
    • Cause: Feed dog issues, improper presser foot pressure, or fabric handling techniques.
    • Troubleshooting:
    1. Clean the feed dogs and surrounding area to remove any debris or lint that may be obstructing smooth fabric movement.
    2. Adjust the presser foot pressure according to the fabric thickness and type being sewn.
    3. Ensure proper fabric handling techniques, such as guiding the fabric evenly and avoiding excessive pulling or pushing.
  13. Error message “Bobbin case error”
    • Description: The machine indicates a problem with the bobbin case or bobbin area.
    • Cause: Improper bobbin installation, damaged bobbin case, or sensor malfunction.
    • Troubleshooting:
    1. Remove the bobbin case and reinsert it, ensuring it is seated correctly and engaged with the machine.
    2. Inspect the bobbin case for any damage or wear and replace if necessary.
    3. If the issue persists, the sensor responsible for detecting bobbin case issues may be faulty and require professional repair.
  14. Needle threader not functioning
    • Description: The automatic needle threader fails to thread the needle.
    • Cause: Misalignment, mechanical issues, or threader malfunction.
    • Troubleshooting:
    1. Ensure the needle is correctly positioned and aligned for threading.
    2. Check for any obstructions or debris in the needle threader mechanism and clear them.
    3. If the issue persists, consult the machine’s manual for manual threading instructions or consider professional servicing.
  15. Error message “Machine out of memory”
    • Description: The machine indicates a memory-related error, indicating insufficient memory for the selected operation.
    • Cause: Memory overload, software glitch, or incompatible design files.
    • Troubleshooting:
    1. Reduce the complexity or size of the embroidery design or pattern being used.
    2. Clear unnecessary files or designs from the machine’s memory to free up space.
    3. If the issue persists, consult technical support for further assistance or consider upgrading the machine’s memory capacity.
  16. Error message “Machine calibration error”
    • Description: The machine displays an error related to calibration or alignment.
    • Cause: Mechanical misalignment, sensor malfunction, or software glitch.
    • Troubleshooting:
    1. Restart the machine to see if the error clears after a power cycle.
    2. Check for any physical misalignments or obstructions in the machine’s moving parts.
    3. If the issue persists, consult the machine’s manual for calibration instructions or contact technical support for assistance.
Here you can find all the 
parts and accessories for the Husqvarna Viking 1250
guaranteed to fit your sewing machine

Husqvarna Viking 1250 Sewing Machine Manual

The operating instructions for the Husqvarna Viking 1250 sewing machine can be found on the manufacturer’s website. For detailed guidance on setting up and using your machine, including troubleshooting tips, please visit the official Husqvarna Viking website and navigate to the product support or manuals section.

Frequently Asked Questions (FAQ) for Husqvarna Viking 1250

1. How can I resolve issues with irregular stitches on my Husqvarna Viking 1250?

Answer: Check for a bent or damaged needle, adjust the thread tension, and ensure the bobbin is correctly threaded and inserted. Refer to the troubleshooting steps in the relevant section for detailed guidance.

2. How do I address bobbin jamming issues with my Viking 1250?

Answer: Remove and rethread the bobbin, clean the bobbin case area, and ensure the bobbin is of the correct type and properly wound. Follow the troubleshooting steps provided earlier for more detailed instructions.

Conclusion

Always refer to the manual, customer service, or the service center whenever you encounter problems with your Husqvarna Viking 1250 sewing machine. The manual provides detailed instructions and troubleshooting tips specific to your model, and the customer service or service center can offer personalized assistance for resolving issues.


Husqvarna Viking 1200 Common Problems

Husqvarna Viking 1140 Common Problems

Husqvarna Viking 1100 Common Problems

Leave a Comment