by

Husqvarna Viking 5710 Common Problems and Troubleshooting

Welcome to our guide on troubleshooting common problems with the Husqvarna Viking 5710 sewing machine. Whether you’re a beginner or an experienced user, encountering issues with your sewing machine can be frustrating. In this article, we’ll explore various common problems that users may face with the Husqvarna Viking 5710 and provide effective solutions to resolve them. From minor issues to more complex malfunctions, we’ve got you covered. Let’s dive in and ensure smooth sewing experiences with your Husqvarna Viking 5710.

Causes of Common Problems with the Husqvarna Viking 5710

This section serves as an introduction to the various common problems and troubleshooting techniques associated with the Husqvarna Viking 5710 sewing machine. We’ll delve into specific product details and explore the vintage electric components that may contribute to these issues. Stay tuned as we address potential challenges and offer practical solutions tailored to the Husqvarna Viking 5710.

Common Problems with the Husqvarna Viking 5710

1. Thread Breaking

  • Description of the problem: One common issue with the Husqvarna Viking 5710 is thread breaking during sewing.
  • Cause of the problem: Thread breaking can occur due to various reasons such as incorrect threading, using low-quality or old thread, or a bent needle.
  • Troubleshooting step-by-step:
    1. Check the threading of the machine, ensuring it follows the correct path as per the user manual.
    2. Replace the needle with a new, appropriate needle size and ensure it is correctly inserted.
    3. Use high-quality thread suitable for the fabric being sewn and ensure it is not old or tangled.
    4. Adjust the tension settings on the machine to ensure they are suitable for the fabric and thread being used.

2. Uneven Stitching

  • Description of the problem: Husqvarna Viking 5710 users may encounter issues with uneven stitching, resulting in an unsightly finish.
  • Cause of the problem: Uneven stitching can be caused by incorrect tension settings, a damaged or bent presser foot, or an issue with the feed dogs.
  • Troubleshooting step-by-step:
    1. Check and adjust the tension settings on the machine, ensuring they are appropriate for the fabric and thread being used.
    2. Inspect the presser foot for any damage or bending, and replace if necessary.
    3. Clean and lubricate the feed dogs to ensure smooth movement and proper fabric feeding.
    4. Ensure the machine is properly threaded and that the bobbin is correctly inserted.

3. Machine Jamming

  • Description of the problem: Another common issue with the Husqvarna Viking 5710 is the machine jamming or getting stuck during sewing.
  • Cause of the problem: Machine jamming can occur due to various reasons such as tangled thread, debris in the bobbin area, or a misaligned needle.
  • Troubleshooting step-by-step:
    1. Turn off the machine and remove the fabric and thread.
    2. Carefully remove the bobbin case and clean out any debris or lint that may be causing the jam.
    3. Check the needle for any bends or damage, and replace if necessary.
    4. Re-thread the machine, ensuring the thread is properly inserted and the bobbin is correctly wound.
    5. Test the machine on a scrap piece of fabric to ensure the issue has been resolved.

4. Needle Breakage

  • Description of the problem: Users of the Husqvarna Viking 5710 may face the problem of needle breakage while sewing.
  • Cause of the problem: Needle breakage can occur due to various reasons such as using the wrong type or size of needle, sewing through thick layers of fabric, or hitting a pin or other hard object.
  • Troubleshooting step-by-step:
    1. Ensure you are using the correct type and size of needle for the fabric being sewn.
    2. Avoid sewing through excessive layers of fabric by reducing the number of layers or using a walking foot attachment.
    3. Check the fabric carefully for any pins or other objects that may damage the needle, and remove them before sewing.
    4. Replace the needle with a new one if it appears bent or damaged.

5. Bobbin Thread Tension Issues

  • Description of the problem: Husqvarna Viking 5710 users may experience issues with the tension of the bobbin thread, leading to loose or tight stitches on the underside of the fabric.
  • Cause of the problem: Bobbin thread tension issues can be caused by incorrect bobbin winding, improper threading of the bobbin case, or debris in the bobbin area.
  • Troubleshooting step-by-step:
    1. Ensure the bobbin is wound evenly and properly inserted into the bobbin case.
    2. Check the threading of the bobbin case, making sure it follows the correct path as per the user manual.
    3. Clean out any debris or lint from the bobbin area and around the bobbin case.
    4. Adjust the tension screw on the bobbin case slightly to increase or decrease tension as needed, testing on scrap fabric until the desired tension is achieved.

6. Stitch Skipping

  • Description of the problem: Stitch skipping occurs when the Husqvarna Viking 5710 sewing machine skips stitches while sewing, resulting in incomplete or irregular stitching.
  • Cause of the problem: Stitch skipping can be caused by a dull or damaged needle, improper threading, or incorrect tension settings.
  • Troubleshooting step-by-step:
    1. Replace the needle with a new, sharp needle suitable for the fabric being sewn.
    2. Check the threading of the machine, ensuring it follows the correct path and is not tangled.
    3. Adjust the tension settings on the machine, ensuring they are appropriate for the fabric and thread being used.
    4. Ensure the presser foot is properly attached and that the fabric is being fed smoothly through the machine.

7. Loud or Unusual Noises

  • Description of the problem: Users of the Husqvarna Viking 5710 may notice loud or unusual noises coming from the machine during operation.
  • Cause of the problem: Loud or unusual noises can be caused by a variety of issues such as a loose or damaged belt, worn-out gears, or lack of lubrication.
  • Troubleshooting step-by-step:
    1. Turn off the machine and unplug it from the power source.
    2. Inspect the machine for any loose or damaged parts, such as belts or gears, and tighten or replace them as necessary.
    3. Apply lubricant to moving parts according to the manufacturer’s recommendations.
    4. Test the machine again to see if the noises persist, and if they do, consider contacting a professional for further inspection.

8. Bobbin Jamming

  • Description of the problem: Bobbin jamming occurs when the bobbin thread becomes tangled or caught, leading to difficulties in sewing.
  • Cause of the problem: Bobbin jamming can be caused by improper bobbin winding, incorrect insertion of the bobbin, or debris in the bobbin area.
  • Troubleshooting step-by-step:
    1. Remove the bobbin case and carefully unwind any tangled thread.
    2. Check the bobbin for any damage or irregularities and replace if necessary.
    3. Re-thread the bobbin, ensuring it follows the correct path and is properly inserted into the bobbin case.
    4. Clean out any debris or lint from the bobbin area and around the bobbin case.

9. Fabric Jamming

  • Description of the problem: Fabric jamming occurs when the fabric becomes stuck or tangled in the feed dogs or other parts of the sewing machine.
  • Cause of the problem: Fabric jamming can be caused by improper feeding of the fabric, a dull or damaged needle, or a malfunctioning feed dog mechanism.
  • Troubleshooting step-by-step:
    1. Stop sewing immediately and turn off the machine.
    2. Carefully remove the fabric from the machine, avoiding pulling or tugging that could damage the fabric or the machine.
    3. Inspect the feed dogs and other parts of the machine for any obstructions or damage, and clear or repair as necessary.
    4. Re-thread the machine and test it on a scrap piece of fabric to ensure the issue has been resolved.

10. Jammed Needle Plate

  • Description of the problem: The needle plate of the Husqvarna Viking 5710 may become jammed, preventing smooth fabric movement and sewing.
  • Cause of the problem: A jammed needle plate can be caused by built-up lint or debris, improper installation, or a malfunctioning needle plate mechanism.
  • Troubleshooting step-by-step:
    1. Turn off the machine and unplug it from the power source.
    2. Remove the needle plate and clean out any lint or debris using a brush or vacuum.
    3. Inspect the needle plate and surrounding area for any signs of damage or misalignment, and repair or replace parts as necessary.
    4. Re-install the needle plate securely and test the machine on scrap fabric to ensure proper operation.

11. Bobbin Case Issues

  • Description of the problem: Users may encounter problems with the bobbin case of the Husqvarna Viking 5710, such as improper tension or difficulty in inserting the bobbin.
  • Cause of the problem: Bobbin case issues can arise due to improper threading, damaged bobbin case components, or debris accumulation.
  • Troubleshooting step-by-step:
    1. Remove the bobbin case and inspect it for any damage or debris.
    2. Clean the bobbin case thoroughly, removing any lint or debris that may affect its functionality.
    3. Re-thread the bobbin case, ensuring it follows the correct path as per the user manual.
    4. Adjust the tension screw on the bobbin case if necessary, testing the tension on scrap fabric until satisfactory results are achieved.

12. Needle Alignment Issues

  • Description of the problem: Needle alignment issues may occur with the Husqvarna Viking 5710, resulting in crooked or uneven stitching.
  • Cause of the problem: Needle misalignment can be caused by improper installation, a bent needle, or a misaligned needle bar.
  • Troubleshooting step-by-step:
    1. Turn off the machine and unplug it from the power source.
    2. Inspect the needle to ensure it is straight and not bent.
    3. Check the needle bar for proper alignment, adjusting it if necessary according to the manufacturer’s instructions.
    4. Re-install the needle, making sure it is inserted correctly and tightened securely.

13. Feed Dog Malfunction

  • Description of the problem: Users may experience issues with the feed dogs of the Husqvarna Viking 5710, leading to uneven fabric feeding or fabric jams.
  • Cause of the problem: Feed dog malfunctions can occur due to debris accumulation, worn-out parts, or improper adjustment.
  • Troubleshooting step-by-step:
    1. Turn off the machine and unplug it from the power source.
    2. Remove the needle plate to access the feed dogs.
    3. Clean the feed dogs thoroughly, removing any lint or debris.
    4. Inspect the feed dog mechanism for any signs of wear or damage, replacing any worn-out parts.
    5. Adjust the feed dog height and pressure according to the manufacturer’s instructions.

14. Thread Tension Discs Issues

  • Description of the problem: Problems with the thread tension discs of the Husqvarna Viking 5710 may result in inconsistent tension and poor stitch quality.
  • Cause of the problem: Issues with the thread tension discs can arise due to debris accumulation, misalignment, or worn-out parts.
  • Troubleshooting step-by-step:
    1. Turn off the machine and unplug it from the power source.
    2. Open the thread tension assembly to access the tension discs.
    3. Clean the tension discs thoroughly, removing any lint or debris.
    4. Inspect the tension discs for any signs of wear or damage, replacing them if necessary.
    5. Reassemble the thread tension assembly and adjust the tension settings as needed.

15. Motor Overheating

  • Description of the problem: The motor of the Husqvarna Viking 5710 may overheat during prolonged use, leading to machine malfunction or shutdown.
  • Cause of the problem: Motor overheating can be caused by excessive use, inadequate ventilation, or a malfunctioning motor.
  • Troubleshooting step-by-step:
    1. Turn off the machine and unplug it from the power source.
    2. Allow the machine to cool down for a sufficient amount of time.
    3. Inspect the motor for any signs of damage or obstruction, clearing any debris if necessary.
    4. Ensure proper ventilation around the machine to prevent overheating in the future.
    5. If the problem persists, consider contacting a professional technician for further inspection and repair.

16. Buttonhole Malfunction

  • Description of the problem: Users may encounter issues with the buttonhole function of the Husqvarna Viking 5710, resulting in improperly formed or inconsistent buttonholes.
  • Cause of the problem: Buttonhole malfunctions can be caused by incorrect settings, improper positioning of the fabric, or a malfunctioning buttonhole foot.
  • Troubleshooting step-by-step:
    1. Ensure the machine is set to the correct buttonhole stitch and size.
    2. Position the fabric correctly under the buttonhole foot, ensuring it is securely in place.
    3. Check the buttonhole foot for any damage or debris, cleaning or replacing it if necessary.
    4. Adjust the tension settings and stitch length as needed to achieve the desired buttonhole result.

17. Thread Cutter Failure

  • Description of the problem: The thread cutter feature of the Husqvarna Viking 5710 may fail to cut the thread cleanly, resulting in frayed or tangled threads.
  • Cause of the problem: Thread cutter failure can be caused by dull or damaged cutting blades, improper use, or debris accumulation.
  • Troubleshooting step-by-step:
    1. Inspect the cutting blades for any signs of dullness or damage, replacing them if necessary.
    2. Ensure the thread cutter mechanism is functioning properly and not obstructed by any debris.
    3. Check the thread cutter button or lever for proper operation, ensuring it is engaged correctly.
    4. Adjust the thread tension and stitch length if necessary to prevent thread bunching before cutting.

18. Light Bulb Replacement

  • Description of the problem: Users may need to replace the light bulb of the Husqvarna Viking 5710 if it burns out or becomes dim.
  • Cause of the problem: Light bulb replacement is necessary due to regular wear and tear or a malfunctioning bulb.
  • Troubleshooting step-by-step:
    1. Turn off the machine and unplug it from the power source.
    2. Allow the bulb to cool down if it was recently in use.
    3. Locate the light bulb housing and remove the old bulb by twisting it counterclockwise.
    4. Insert the new bulb into the housing, ensuring it is securely in place, and twist it clockwise to lock it in position.
    5. Test the light to ensure proper functionality before resuming sewing.

19. Foot Pedal Issues

  • Description of the problem: Users may experience issues with the foot pedal of the Husqvarna Viking 5710, such as unresponsiveness or erratic behavior.
  • Cause of the problem: Foot pedal issues can be caused by damaged wiring, loose connections, or a malfunctioning pedal mechanism.
  • Troubleshooting step-by-step:
    1. Inspect the foot pedal and its wiring for any signs of damage or wear.
    2. Check the connections between the foot pedal and the machine, ensuring they are tight and secure.
    3. Clean the foot pedal mechanism to remove any dirt or debris that may affect its operation.
    4. If the problem persists, consider replacing the foot pedal or contacting a professional technician for further inspection.

20. Bobbin Winder Malfunction

  • Description of the problem: Users may encounter issues with the bobbin winder function of the Husqvarna Viking 5710, resulting in improperly wound bobbins or failure to engage.
  • Cause of the problem: Bobbin winder malfunctions can be caused by a misaligned bobbin winder mechanism, worn-out parts, or debris accumulation.
  • Troubleshooting step-by-step:
    1. Ensure the machine is set to the bobbin winding mode and the bobbin winder is engaged.
    2. Inspect the bobbin winder mechanism for any signs of misalignment or damage, adjusting or replacing parts as necessary.
    3. Clean the bobbin winder area to remove any debris that may be obstructing its operation.
    4. Check the bobbin for proper winding tension and adjust the tension knob if necessary.

21. Stitch Length Inconsistency

  • Description of the problem: Users may notice inconsistency in stitch length while using the Husqvarna Viking 5710, resulting in uneven seams or patterns.
  • Cause of the problem: Stitch length inconsistency can be caused by incorrect machine settings, a malfunctioning feed mechanism, or improper threading.
  • Troubleshooting step-by-step:
    1. Check the machine settings to ensure the desired stitch length is selected.
    2. Inspect the feed mechanism for any signs of obstruction or damage, cleaning or repairing as necessary.
    3. Re-thread the machine, making sure the thread is properly tensioned and inserted through the tension discs.
    4. Test the machine on scrap fabric to verify that the stitch length is consistent before resuming sewing.

22. Thread Jamming in the Bobbin Case

  • Description of the problem: Users may experience thread jamming in the bobbin case of the Husqvarna Viking 5710, causing the machine to stop or malfunction.
  • Cause of the problem: Thread jamming in the bobbin case can be caused by improper bobbin winding, tangled thread, or a misaligned bobbin case.
  • Troubleshooting step-by-step:
    1. Stop the machine immediately and turn it off.
    2. Remove the bobbin case and check for any tangled thread or debris.
    3. Clean the bobbin case area and surrounding components to ensure smooth operation.
    4. Re-insert the bobbin case properly, following the machine’s manual instructions.
    5. Resume sewing on a scrap fabric to ensure the issue is resolved.

23. Feed Dogs Not Moving

  • Description of the problem: Users may encounter issues where the feed dogs of the Husqvarna Viking 5710 do not move, preventing fabric from advancing during sewing.
  • Cause of the problem: The feed dogs not moving can be caused by a disconnected or broken feed dog mechanism, debris accumulation, or a malfunctioning motor.
  • Troubleshooting step-by-step:
    1. Turn off the machine and unplug it from the power source.
    2. Inspect the feed dog mechanism for any signs of damage or obstruction, cleaning or repairing as necessary.
    3. Check for any debris or lint that may be obstructing the movement of the feed dogs, removing it carefully.
    4. If the problem persists, contact a professional technician for further inspection and repair.

24. Bobbin Thread Looping

  • Description of the problem: Users may notice the bobbin thread looping on the underside of the fabric while using the Husqvarna Viking 5710, resulting in messy stitches.
  • Cause of the problem: Bobbin thread looping can be caused by incorrect tension settings, improper threading, or a malfunctioning bobbin tension spring.
  • Troubleshooting step-by-step:
    1. Check the tension settings on the machine, ensuring they are appropriate for the fabric and thread being used.
    2. Re-thread the bobbin and bobbin case, ensuring the thread is properly tensioned and inserted through the tension spring.
    3. Clean the bobbin case area and surrounding components to remove any debris or lint that may be affecting the tension.
    4. Adjust the tension spring if necessary, testing the machine on scrap fabric until the looping issue is resolved.

25. Thread Bunching Underneath the Fabric

  • Description of the problem: Users may encounter issues where the thread bunches up underneath the fabric while using the Husqvarna Viking 5710, resulting in uneven stitches and fabric jams.
  • Cause of the problem: Thread bunching underneath the fabric can be caused by improper tension settings, incorrect threading, or a malfunctioning bobbin case.
  • Troubleshooting step-by-step:
    1. Check the tension settings on the machine, ensuring they are appropriate for the fabric and thread being used.
    2. Re-thread the machine, making sure the thread is properly tensioned and inserted through the tension discs and bobbin case.
    3. Clean the bobbin case area and surrounding components to remove any debris or lint that may be affecting the tension.
    4. Adjust the tension settings and test the machine on scrap fabric until the thread bunching issue is resolved.

Husqvarna Viking 5710 Sewing Machine Manual

The operating instructions for the Husqvarna Viking 5710 sewing machine can be found on the manufacturer’s website. Please visit the official website of Husqvarna Viking and navigate to the support or manuals section to access the comprehensive manual for your sewing machine model.

Husqvarna Viking 5710 Frequently Asked Questions

1. How do I thread the Husqvarna Viking 5710 sewing machine?

To thread the Husqvarna Viking 5710 sewing machine, follow these steps:

  1. Raise the presser foot and turn the handwheel until the needle is at its highest position.
  2. Place the spool of thread on the spool pin and lead the thread through the thread guide.
  3. Guide the thread through the tension discs, following the threading path indicated on the machine.
  4. Thread the needle from front to back and pull the thread through the needle’s eye.
  5. Hold the thread tail gently and lower the presser foot.
  6. Turn the handwheel again to bring the needle to its lowest position, then gently pull the thread to bring the bobbin thread up.
  7. Now, your Husqvarna Viking 5710 sewing machine is threaded and ready for use.

2. Why is my Husqvarna Viking 5710 sewing machine jamming?

Husqvarna Viking 5710 sewing machine may jam due to various reasons such as tangled thread, debris in the bobbin area, or a misaligned needle. To troubleshoot this issue, follow these steps:

  1. Turn off the machine and remove the fabric and thread.
  2. Carefully remove the bobbin case and clean out any debris or lint.
  3. Check the needle for any bends or damage and replace if necessary.
  4. Re-thread the machine and ensure proper tension settings.
  5. Test the machine on scrap fabric to ensure the issue has been resolved.

3. How do I adjust the tension on my Husqvarna Viking 5710 sewing machine?

To adjust the tension on the Husqvarna Viking 5710 sewing machine, follow these steps:

  1. Identify the tension control dial or knob on your machine.
  2. Turn the dial or knob to the left to decrease tension or to the right to increase tension.
  3. Test the machine on scrap fabric after each adjustment until you achieve the desired tension for your project.

4. What should I do if the stitches on my Husqvarna Viking 5710 sewing machine are skipping?

If the stitches on your Husqvarna Viking 5710 sewing machine are skipping, try the following troubleshooting steps:

  1. Ensure you are using the correct needle for the fabric.
  2. Check the threading of the machine, ensuring it follows the correct path.
  3. Adjust the tension settings to ensure they are appropriate for the fabric and thread being used.
  4. If the problem persists, consider replacing the needle or contacting customer service for assistance.

5. How often should I clean and maintain my Husqvarna Viking 5710 sewing machine?

It is recommended to clean and maintain your Husqvarna Viking 5710 sewing machine regularly to ensure optimal performance. Depending on usage, you may need to clean it after every project or every few weeks. Refer to the instruction manual for specific maintenance guidelines.

Conclusion

For any problems encountered with your Husqvarna Viking 5710 sewing machine, it is advisable to always refer to the manual, contact customer service, or visit a service center whenever possible. Proper troubleshooting and maintenance can help resolve issues and ensure the longevity of your machine.


Husqvarna Viking 5610 Common Problems

Husqvarna Viking Huskylock 560EDT Common Problems

Husqvarna Viking Huskylock 560ED Common Problems

Leave a Comment