by

Husqvarna Viking Designer Ruby 90 Common Problems and Troubleshooting

If you own a Husqvarna Viking Designer Ruby 90 sewing machine, you know the joy and precision it brings to your sewing projects. However, like any sophisticated piece of technology, occasional issues may arise. This article aims to address common problems encountered with the Husqvarna Viking Designer Ruby 90 and provide troubleshooting tips to ensure smooth sewing experiences.

Causes of Common Problems with the Husqvarna Viking Designer Ruby 90

This section provides insights into potential issues and solutions concerning the Husqvarna Viking Designer Ruby 90 sewing machine.

Common Problems and Troubleshooting for Husqvarna Viking Designer Ruby 90

1. Bobbin Thread Tension Issues

  • Description of the problem: Uneven stitching or looping on the underside of the fabric.
  • Cause of the problem: Incorrect bobbin tension or improper threading.
  • Troubleshooting step-by-step:
    1. Ensure the bobbin is correctly inserted and threaded following the machine’s manual.
    2. Adjust the bobbin tension using the tension screw according to the fabric being used.
    3. Test sew on a scrap fabric piece to check the tension and adjust as needed.

2. Needle Breakage

  • Description of the problem: Needles frequently breaking during sewing.
  • Cause of the problem: Incorrect needle type or size, bent needle, or fabric jamming.
  • Troubleshooting step-by-step:
    1. Ensure you are using the correct needle type and size for the fabric being sewn.
    2. Inspect the needle for any signs of bending or damage and replace if necessary.
    3. Check for any fabric jams or obstructions in the machine’s mechanism.

3. Thread Tension Discrepancies

  • Description of the problem: Uneven tension between the top and bottom threads, resulting in puckering or loose stitches.
  • Cause of the problem: Incorrect threading, lint buildup, or tension disks issues.
  • Troubleshooting step-by-step:
    1. Clean the machine’s thread path and tension discs to remove any lint or debris.
    2. Ensure the machine is threaded correctly, following the threading guide.
    3. Adjust the tension settings, starting with the top thread tension, and test sew on a scrap fabric.

4. Machine Jamming or Freezing

  • Description of the problem: The machine gets stuck or freezes during operation.
  • Cause of the problem: Jammed thread, tangled threads, or mechanical issues.
  • Troubleshooting step-by-step:
    1. Turn off the machine and disconnect it from power.
    2. Carefully remove the fabric and check for any tangled threads or jams in the bobbin area.
    3. Clean the machine’s feed dogs and shuttle race to ensure smooth operation.
    4. If the problem persists, consult a qualified technician for further inspection and repair.

5. Embroidery Design Alignment Issues

  • Description of the problem: Embroidery designs not aligning correctly or shifting during stitching.
  • Cause of the problem: Incorrect hoop placement, design resizing, or hoop tension.
  • Troubleshooting step-by-step:
    1. Check the hoop placement and ensure it is securely attached to the machine.
    2. Verify that the embroidery design is properly sized and centered within the hoop.
    3. Adjust the hoop tension if necessary, ensuring the fabric is taut but not stretched.
    4. If alignment issues persist, consider rehooping the fabric and retrying the embroidery.

6. Thread Cutter Malfunction

  • Description of the problem: The automatic thread cutter fails to function properly.
  • Cause of the problem: Dull or misaligned thread cutter blade, thread jam, or software glitch.
  • Troubleshooting step-by-step:
    1. Inspect the thread cutter blade for any signs of damage or dullness and replace if necessary.
    2. Clean the thread cutter area to remove any accumulated lint or debris that may be causing a jam.
    3. Reset the machine by turning it off and on again to see if the issue resolves.
    4. If the problem persists, perform a software update or contact customer support for further assistance.

7. Stitch Length Variation

  • Description of the problem: Inconsistent stitch lengths during sewing.
  • Cause of the problem: Improper adjustment of stitch length settings, mechanical issues, or worn feed dogs.
  • Troubleshooting step-by-step:
    1. Check the stitch length settings on the machine and adjust as needed for the desired stitch length.
    2. Inspect the feed dogs for any signs of wear or damage and replace if necessary.
    3. Clean the feed dogs and surrounding area to remove any lint or debris that may be affecting stitch consistency.
    4. If the issue persists, consult a technician for further inspection and adjustment.

8. Bobbin Winding Problems

  • Description of the problem: Difficulties in winding the bobbin evenly or completely.
  • Cause of the problem: Improper bobbin winding technique, bobbin winding spindle misalignment, or bobbin tension issues.
  • Troubleshooting step-by-step:
    1. Ensure the bobbin is inserted correctly onto the winding spindle and engaged properly.
    2. Check the bobbin winding tension adjustment and adjust if necessary for even winding.
    3. Monitor the bobbin winding process to ensure the thread winds smoothly and evenly onto the bobbin.
    4. If the problem persists, clean the bobbin winding area and reattempt bobbin winding.

9. Thread Breakage

  • Description of the problem: Thread frequently breaking during sewing.
  • Cause of the problem: Incorrect thread tension, dull or bent needle, or thread snagging on rough surfaces.
  • Troubleshooting step-by-step:
    1. Check the tension settings for both the top and bobbin threads and adjust as needed.
    2. Inspect the needle for any signs of damage or wear and replace if necessary.
    3. Use a smoother thread or ensure the fabric surface is smooth to prevent thread snagging.
    4. Re-thread the machine and test sew on a scrap fabric to check for thread breakage.

10. Buttonhole Malfunction

  • Description of the problem: Buttonholes not forming correctly or unevenly stitched.
  • Cause of the problem: Incorrect buttonhole foot attachment, incorrect settings, or fabric thickness.
  • Troubleshooting step-by-step:
    1. Ensure the buttonhole foot is securely attached and compatible with the machine.
    2. Check the buttonhole settings on the machine and adjust for the desired buttonhole size and style.
    3. Use stabilizer or interfacing if sewing on thick or stretchy fabrics to improve buttonhole quality.
    4. If buttonhole issues persist, experiment with different settings and fabric samples to find the optimal combination.

11. Thread Nesting Underneath the Fabric

  • Description of the problem: Loops of thread forming underneath the fabric during sewing.
  • Cause of the problem: Incorrect tension settings, improperly threaded machine, or dull needle.
  • Troubleshooting step-by-step:
    1. Check the tension settings for both the top and bobbin threads and adjust if necessary.
    2. Ensure the machine is threaded correctly according to the manual, with the presser foot up.
    3. Inspect the needle for any signs of damage or dullness and replace if necessary.
    4. Test sew on a scrap fabric piece with various tension and threading adjustments to resolve the issue.

12. Uneven Feed Dog Movement

  • Description of the problem: Uneven feeding of fabric resulting in puckering or uneven stitching.
  • Cause of the problem: Dirty or worn feed dogs, improper presser foot pressure, or misalignment.
  • Troubleshooting step-by-step:
    1. Clean the feed dogs thoroughly to remove any lint or debris that may be causing uneven movement.
    2. Adjust the presser foot pressure according to the fabric being sewn to ensure even feeding.
    3. Inspect the feed dog alignment and adjust if necessary following the machine’s manual.
    4. If the issue persists, consult a technician for further inspection and adjustment.

13. Needle Threader Malfunction

  • Description of the problem: The automatic needle threader fails to work properly.
  • Cause of the problem: Bent or misaligned needle, threader mechanism jam, or sensor malfunction.
  • Troubleshooting step-by-step:
    1. Ensure the needle is inserted correctly and not bent.
    2. Clean the needle threader mechanism and surrounding area to remove any obstructions.
    3. Check for any sensor issues by manually threading the needle to see if the machine detects it.
    4. If the problem persists, contact customer support for further assistance or repair.

14. Embroidery Hoop Alignment Problems

  • Description of the problem: Difficulty aligning the embroidery hoop for precise stitching.
  • Cause of the problem: Hoop misalignment, hoop tightening issues, or insufficient stabilization.
  • Troubleshooting step-by-step:
    1. Ensure the embroidery hoop is properly attached and aligned with the machine’s embroidery arm.
    2. Adjust the hoop tightening mechanism to secure the fabric evenly and prevent shifting during embroidery.
    3. Use additional stabilizer or interfacing to support the fabric and improve embroidery alignment.
    4. If alignment problems persist, experiment with different hooping techniques or consult embroidery experts for advice.

15. Thread Sensor Errors

  • Description of the problem: The machine displays thread sensor errors despite correct threading.
  • Cause of the problem: Dirty or misaligned thread sensor, thread sensor calibration issues, or software glitches.
  • Troubleshooting step-by-step:
    1. Clean the thread sensor area and surrounding components to remove any dirt or debris.
    2. Check the thread sensor calibration settings and recalibrate if necessary following the machine’s manual.
    3. Perform a software update to ensure the machine’s firmware is up to date and free of glitches.
    4. If the issue persists, contact customer support for further assistance or repair.

16. Bobbin Case Jamming

  • Description of the problem: The bobbin case gets stuck or jams during sewing.
  • Cause of the problem: Accumulation of lint or debris in the bobbin case area, improper bobbin insertion, or bobbin case misalignment.
  • Troubleshooting step-by-step:
    1. Turn off the machine and remove the bobbin case carefully.
    2. Clean the bobbin case area thoroughly to remove any lint, dust, or debris.
    3. Check the bobbin for any signs of damage or irregularities and replace if necessary.
    4. Reinsert the bobbin correctly into the bobbin case, ensuring it rotates smoothly.
    5. If the problem persists, check the bobbin case alignment and adjust if needed.

17. Thread Puckering

  • Description of the problem: Fabric puckers or gathers excessively during sewing.
  • Cause of the problem: Incorrect tension settings, improper presser foot pressure, or using the wrong needle type.
  • Troubleshooting step-by-step:
    1. Check the tension settings for both the top and bobbin threads and adjust as necessary.
    2. Adjust the presser foot pressure according to the fabric type and thickness being sewn.
    3. Ensure you are using the correct needle type and size for the fabric to prevent puckering.
    4. Test sew on a scrap fabric piece with various tension and pressure adjustments to achieve desired results.

18. Foot Pedal Responsiveness Issues

  • Description of the problem: The foot pedal does not respond consistently or accurately to pressure.
  • Cause of the problem: Loose connections, faulty foot pedal, or electronic malfunction.
  • Troubleshooting step-by-step:
    1. Check the connection between the foot pedal and the machine to ensure it is secure.
    2. Inspect the foot pedal for any signs of damage or wear, such as frayed wires or broken components.
    3. Test the foot pedal on another compatible machine to determine if the issue is with the pedal or the machine.
    4. If the problem persists, contact customer support for further assistance or replacement.

19. Inconsistent Bobbin Winding

  • Description of the problem: Bobbins winding unevenly or inconsistently.
  • Cause of the problem: Improper tension settings, incorrect bobbin insertion, or bobbin winding mechanism issues.
  • Troubleshooting step-by-step:
    1. Check the bobbin winding tension settings and adjust as necessary for even winding.
    2. Ensure the bobbin is inserted correctly onto the winding spindle and engaged properly.
    3. Inspect the bobbin winding mechanism for any signs of damage or malfunction and repair if needed.
    4. If the problem persists, try winding the bobbin at a slower speed or consult a technician for further assistance.

20. Fabric Feeding Unevenness

  • Description of the problem: Fabric does not feed smoothly or evenly through the machine.
  • Cause of the problem: Dirty or worn feed dogs, improper presser foot pressure, or fabric stretching.
  • Troubleshooting step-by-step:
    1. Clean the feed dogs thoroughly to remove any lint or debris that may be affecting fabric movement.
    2. Adjust the presser foot pressure according to the fabric type and thickness to ensure even feeding.
    3. If sewing stretchy fabrics, use a walking foot attachment or stabilizer to prevent fabric stretching.
    4. If the issue persists, consult a technician for further inspection and adjustment.

21. Thread Fraying or Shredding

  • Description of the problem: Thread becomes frayed or shreds during sewing.
  • Cause of the problem: Dull or bent needle, incorrect thread tension, or using low-quality thread.
  • Troubleshooting step-by-step:
    1. Inspect the needle for any signs of dullness or damage and replace if necessary.
    2. Adjust the thread tension settings for both the top and bobbin threads to prevent excessive stress on the thread.
    3. Use high-quality thread appropriate for the fabric being sewn to minimize fraying.
    4. Test sew on a scrap fabric piece with various tension and needle adjustments to achieve smooth stitching.

22. Stitch Skips or Missed Stitches

  • Description of the problem: Stitches are skipped or missed intermittently during sewing.
  • Cause of the problem: Improper needle insertion, incorrect needle size, or timing issues.
  • Troubleshooting step-by-step:
    1. Ensure the needle is inserted correctly with the flat side facing the back and fully seated in the needle clamp.
    2. Verify that the needle size is appropriate for the fabric thickness and type being sewn.
    3. Check the machine’s timing according to the manufacturer’s instructions and adjust if necessary.
    4. If the problem persists, consult a technician for further inspection and adjustment.

23. Thread Jamming in the Needle Plate

  • Description of the problem: Thread gets jammed or tangled in the needle plate area.
  • Cause of the problem: Improper threading, blunt needle, or accumulation of lint or debris.
  • Troubleshooting step-by-step:
    1. Turn off the machine and remove the needle plate to access the thread jam.
    2. Carefully remove any tangled thread, lint, or debris using tweezers or a small brush.
    3. Re-thread the machine, ensuring the thread is properly guided through all thread guides and tension discs.
    4. Replace the needle with a new one if it is dull or bent.

24. Stitch Length Inconsistency

  • Description of the problem: Inconsistent stitch lengths throughout the sewing project.
  • Cause of the problem: Incorrect stitch length setting, mechanical issues, or fabric slipping.
  • Troubleshooting step-by-step:
    1. Check the stitch length setting on the machine and adjust as needed for the desired stitch length.
    2. Inspect the feed dogs for any signs of wear or damage and replace if necessary.
    3. Ensure the fabric is properly stabilized and not slipping during sewing.
    4. If the issue persists, consult a technician for further inspection and adjustment.

25. Machine Not Powering On

  • Description of the problem: The sewing machine does not turn on when the power button is pressed.
  • Cause of the problem: Loose power cord connection, faulty power switch, or electrical issues.
  • Troubleshooting step-by-step:
    1. Check that the power cord is securely plugged into both the sewing machine and the power outlet.
    2. Inspect the power switch for any signs of damage or malfunction and test with another power source if possible.
    3. If using a foot pedal, ensure it is properly connected and functioning.
    4. If the machine still does not power on, contact customer support for further assistance or repair.

Husqvarna Viking Designer Ruby 90 Sewing Machine Manual

The operating instructions for the Husqvarna Viking Designer Ruby 90 sewing machine can be found on the manufacturer’s website. Please visit the official Husqvarna Viking website to access the manual and learn more about operating your machine effectively.

Frequently Asked Questions about Husqvarna Viking Designer Ruby 90

1. How can I adjust the tension on my Husqvarna Viking Designer Ruby 90?

To adjust the tension on your Designer Ruby 90, start by selecting the appropriate thread and needle for your fabric. Then, use the tension dial on the machine to adjust the tension for both the top and bobbin threads. Test sew on a scrap fabric to ensure the tension is correct for your project.

2. Why does my needle keep breaking while using the Husqvarna Viking Designer Ruby 90?

Needle breakage can occur due to various reasons, including using the wrong needle size or type, sewing over thick seams, or a bent needle. Ensure you are using the correct needle for your fabric and sewing technique, and replace the needle if it is damaged or bent.

3. How do I troubleshoot thread jamming issues with my Husqvarna Viking Designer Ruby 90?

If you experience thread jamming, first, stop sewing and cut the threads. Then, remove the fabric and check the bobbin area and needle plate for any tangled threads or debris. Clean the machine’s feed dogs and shuttle race, rethread the machine, and test sew on scrap fabric to ensure the issue is resolved.

4. What should I do if my Husqvarna Viking Designer Ruby 90 freezes or stops working unexpectedly?

If your Designer Ruby 90 freezes or stops working unexpectedly, first, turn off the machine and unplug it from the power source. Check for any fabric jams or obstructions in the machine’s mechanism, and clean the machine’s internal components. If the problem persists, contact customer service or a certified service center for further assistance.

5. How can I troubleshoot embroidery design alignment issues with my Husqvarna Viking Designer Ruby 90?

If you’re experiencing alignment issues with embroidery designs, ensure the hoop is securely attached to the machine and the design is properly centered within the hoop. Adjust the hoop tension if necessary, and consider rehooping the fabric for better alignment. Experiment with different settings and fabric samples to achieve the desired results.

Conclusion

For any problems encountered with your Husqvarna Viking Designer Ruby 90 sewing machine, it’s always advisable to refer to the manual, contact customer service, or visit a certified service center for assistance. These resources can provide guidance and solutions to ensure you continue enjoying smooth sewing experiences with your machine.


Husqvarna Viking Designer Ruby Common Problems

Husqvarna Viking Designer Jade 35 EMBROIDERY Common Problems

Husqvarna Viking Designer I USB Common Problems

Leave a Comment