Troubleshooting BERNETTE Sewing machine parts
by

Troubleshooting BERNETTE Sewing machine parts

Sewing machines have become an essential tool for many individuals who enjoy sewing, embroidery, and other fabric-based crafts. However, like any other mechanical device, sewing machines may face issues that can impede their functionality. BERNETTE sewing machines are no exception. They can experience various problems with their parts that require troubleshooting to fix. In this article, we will explore some common BERNETTE sewing machine parts problems and the steps to troubleshoot them.

List of the 10 Commonly Broken BERNETTE Sewing Machine Parts

Here are some of the BERNETTE sewing machine parts that may be more prone to breaking:

  1. Needles
  2. Bobbin case
  3. Tension disks
  4. Spool pin and holder
  5. Slide plate
  6. Feed dog
  7. Take-up lever
  8. Presser foot lever
  9. Presser dial
  10. Throat plate

It’s important to keep these parts in good working condition and to troubleshoot any problems as soon as they arise to prevent further damage to the machine.

Common BERNETTE Sewing machine parts problems and solution

If you are a proud owner of a BERNETTE sewing machine, you know how important it is to keep it in good working order. However, just like any other machine, BERNETTE sewing machines can develop problems with their various parts over time. In this article, we’ll discuss some of the most common BERNETTE sewing machine parts problems and provide solutions to help you troubleshoot and fix these issues. Whether you’re a beginner or an experienced sewer, this guide will help you keep your BERNETTE sewing machine running smoothly for years to come.

BERNETTE sewing machine motor problems

There can be several motor-related problems that a BERNETTE sewing machine can face. Some common issues include the motor not starting at all, the motor running slowly, or the motor making a lot of noise while operating.

Causes of the BERNETTE Sewing machine motor problems

The causes of motor problems in a BERNETTE sewing machine can vary. Some common reasons include a faulty motor, a malfunctioning foot pedal, loose wiring, or a blown fuse.

Troubleshooting BERNETTE Sewing machine motor problems

Here are the troubleshooting steps for BERNETTE sewing machine motor problems:

  1. Check the power source: Make sure that the sewing machine is properly plugged into a working power outlet. If it is not, plug it in and try turning the machine on again.
  2. Check the foot pedal: Ensure that the foot pedal is plugged into the machine securely and that there are no loose connections. Try pressing the pedal down firmly to see if the motor starts.
  3. Check the wiring: Inspect the wiring for any signs of damage or loose connections. If you find any issues, repair or replace the wiring as necessary.
  4. Check the fuse: If the motor still doesn’t start, check the fuse. The fuse is usually located near the motor or on the back of the machine. If it is blown, replace it with a new one.
  5. Check the motor: If none of the above steps work, the motor may be faulty and needs to be replaced or repaired by a professional.

BERNETTE sewing machine belt problems

The belt in a BERNETTE sewing machine is responsible for transferring power from the motor to the needle. If the belt is not functioning properly, the machine may not work correctly. Common problems with the belt include slipping, breaking, or coming off the pulleys.

Causes of the BERNETTE Sewing machine belt problems

The following are some common causes of belt problems in a BERNETTE sewing machine:

  1. Wear and tear: Over time, the belt can wear out and become less effective in transferring power.
  2. Overuse: Using the machine excessively can put a strain on the belt, causing it to break or slip.
  3. Incorrect tension: If the belt is not properly tensioned, it may slip or come off the pulleys.
  4. Loose or damaged pulleys: Loose or damaged pulleys can cause the belt to slip or come off, affecting the machine’s performance.

Troubleshooting BERNETTE Sewing machine belt problems

Here are the troubleshooting steps for BERNETTE sewing machine belt problems:

  1. Turn off the machine: Before starting any troubleshooting, make sure to turn off the machine and unplug it from the power source.
  2. Inspect the belt: Check the belt for any signs of damage, such as cracks or fraying. If the belt is damaged, replace it with a new one.
  3. Adjust the tension: Ensure that the belt is properly tensioned. If it is too loose, tighten it. If it is too tight, loosen it. Refer to the machine’s manual for instructions on how to adjust the tension.
  4. Check the pulleys: Inspect the pulleys for any signs of damage or looseness. Tighten or replace any loose or damaged pulleys as necessary.
  5. Lubricate the belt and pulleys: Apply a small amount of sewing machine oil or lubricant to the belt and pulleys to ensure smooth movement.

BERNETTE sewing machine presser foot problems

The presser foot in a BERNETTE sewing machine is responsible for holding the fabric in place while sewing. Some common presser foot problems include the foot not staying in place, not holding the fabric properly, or not moving up and down as intended.

Causes of the BERNETTE Sewing machine presser foot problems

The following are some common causes of presser foot problems in a BERNETTE sewing machine:

  1. Incorrect installation: If the presser foot is not installed properly, it may not function correctly.
  2. Dirt or debris: Dirt or debris can get trapped in the presser foot, affecting its movement.
  3. Loose or damaged parts: Loose or damaged parts in the presser foot mechanism can cause it to malfunction.
  4. Tension issues: If the presser foot tension is not adjusted correctly, it may not hold the fabric properly.

Troubleshooting BERNETTE Sewing machine presser foot problems

Here are the troubleshooting steps for BERNETTE sewing machine presser foot problems:

  1. Turn off the machine: Before starting any troubleshooting, make sure to turn off the machine and unplug it from the power source.
  2. Check the installation: Ensure that the presser foot is installed correctly. Refer to the machine’s manual for instructions on how to install the presser foot.
  3. Clean the presser foot: Use a small brush or compressed air to clean any dirt or debris from the presser foot.
  4. Check for loose or damaged parts: Inspect the presser foot mechanism for any loose or damaged parts. Tighten or replace any parts as necessary.
  5. Adjust the tension: Ensure that the presser foot tension is adjusted correctly. Refer to the machine’s manual for instructions on how to adjust the presser foot tension.

How To Fix Presser Foot On BERNETTE

Here are the steps to fix the presser foot on a BERNETTE sewing machine:

  1. Turn off the machine: Before starting any repairs, make sure to turn off the machine and unplug it from the power source.
  2. Remove the presser foot: If the presser foot is not functioning correctly, remove it from the machine.
  3. Inspect the presser foot: Check the presser foot for any signs of damage or wear. If it is damaged or worn, replace it with a new one.
  4. Clean the presser foot mechanism: Use a small brush or compressed air to clean any dirt or debris from the presser foot mechanism.
  5. Lubricate the presser foot mechanism: Apply a small amount of sewing machine oil or lubricant to the presser foot mechanism to ensure smooth movement.
  6. Reinstall the presser foot: Once the presser foot and mechanism are clean and lubricated, reinstall the presser foot onto the machine.

BERNETTE sewing machine thread cutter problems

The thread cutter in a BERNETTE sewing machine is responsible for cutting the thread after a seam is complete. Some common thread cutter problems include the cutter not cutting the thread properly or the cutter not working at all.

Causes of the BERNETTE Sewing machine thread cutter problems

The following are some common causes of thread cutter problems in a BERNETTE sewing machine:

  1. Dull blade: Over time, the blade in the thread cutter can become dull, making it less effective in cutting the thread.
  2. Dirt or debris: Dirt or debris can get trapped in the thread cutter mechanism, affecting its movement and cutting ability.
  3. Misaligned cutter: If the thread cutter is not properly aligned, it may not be able to cut the thread properly.

Troubleshooting BERNETTE Sewing machine thread cutter problems

Here are the troubleshooting steps for BERNETTE sewing machine thread cutter problems:

  1. Turn off the machine: Before starting any troubleshooting, make sure to turn off the machine and unplug it from the power source.
  2. Clean the thread cutter: Use a small brush or compressed air to clean any dirt or debris from the thread cutter mechanism.
  3. Check the blade: Inspect the blade in the thread cutter for any signs of dullness or damage. If the blade is dull, replace it with a new one.
  4. Align the cutter: Ensure that the thread cutter is properly aligned. Refer to the machine’s manual for instructions on how to align the thread cutter.
  5. Test the cutter: Once the thread cutter is clean and properly aligned, test it to make sure it is cutting the thread properly. If it is still not working, contact a qualified repair technician.

Hand wheel problems on BERNETTE sewing machine

Some common problems with the hand wheel on a BERNETTE sewing machine include it being difficult to turn, not turning at all, or turning in only one direction.

Causes of the BERNETTE Sewing machine hand wheel problems

The following are some common causes of hand wheel problems on a BERNETTE sewing machine:

  1. Jammed machine: If the machine is jammed, it can cause the hand wheel to become difficult to turn.
  2. Tension issues: Tension issues can also affect the movement of the hand wheel.
  3. Dirty or worn parts: Dirt or wear and tear on parts can cause the hand wheel to not turn properly.

Troubleshooting BERNETTE Sewing machine hand wheel problems. How To Fix BERNETTE Sewing Machine Handwheel

Here are the troubleshooting steps to fix BERNETTE sewing machine hand wheel problems:

  1. Turn off the machine: Before starting any troubleshooting, make sure to turn off the machine and unplug it from the power source.
  2. Check for jams: Check the machine for any jams that may be causing the hand wheel to become difficult to turn. Clear any jams that you find.
  3. Check tension: Check the machine’s tension settings to ensure they are properly adjusted.
  4. Clean parts: Clean any dirt or debris from the hand wheel and surrounding parts.
  5. Lubricate parts: Apply a small amount of sewing machine oil to the hand wheel and surrounding parts to help them move more smoothly.
  6. Test the hand wheel: Once the machine is clean and lubricated, test the hand wheel to see if it is turning smoothly in both directions.

BERNETTE sewing machine Foot Pedal, Power Cord and Switch problems

Some common problems with the foot pedal, power cord, and switch on a BERNETTE sewing machine include the machine not turning on or not responding to foot pedal input.

Causes of the BERNETTE sewing machine Foot Pedal, Power Cord and Switch problems

The following are some common causes of foot pedal, power cord, and switch problems on a BERNETTE sewing machine:

  1. Faulty power cord: A damaged power cord can prevent the machine from turning on.
  2. Loose connections: Loose connections between the foot pedal, power cord, and machine can also cause issues.
  3. Faulty switch: A faulty switch can prevent the machine from turning on or responding to foot pedal input.

Troubleshooting BERNETTE sewing machine Foot Pedal, Power Cord and Switch problems

Here are the troubleshooting steps for BERNETTE sewing machine foot pedal, power cord, and switch problems:

  1. Check power cord: Inspect the power cord for any damage or frayed wires. If there is damage, replace the cord.
  2. Check connections: Make sure all connections between the foot pedal, power cord, and machine are secure.
  3. Test switch: Test the machine’s switch to see if it is functioning properly. If it is not, it may need to be replaced.
  4. Test foot pedal: Test the foot pedal to see if it is working properly. If it is not, it may need to be replaced.
  5. Check power source: Ensure that the machine is plugged into a working power source.
  6. Contact a repair technician: If none of the above steps resolve the issue, contact a qualified repair technician.

BERNETTE sewing machine Reverse Lever problems

The Reverse Lever on the BERNETTE sewing machine is not functioning properly. It may be stuck, difficult to move, or not engaging the reverse stitch properly.

Causes of the BERNETTE sewing machine Reverse Lever problems

  1. Dirt or debris buildup around the lever or inside the machine
  2. Lack of lubrication in the machine
  3. A broken or damaged reverse lever mechanism
  4. Misalignment of the reverse lever mechanism

Troubleshooting BERNETTE sewing machine Reverse Lever problems

  1. Unplug the machine from the power source.
  2. Remove any thread or fabric from the machine and the area around the reverse lever.
  3. Clean the area around the reverse lever using a soft cloth or brush to remove any dirt or debris buildup.
  4. Lubricate the machine according to the manufacturer’s instructions.
  5. Test the reverse lever to see if it is functioning properly. If it is still not working, proceed to the next step.
  6. Open the machine’s cover and inspect the reverse lever mechanism for any signs of damage or misalignment.
  7. If the mechanism is damaged or misaligned, refer to the machine’s manual for instructions on how to repair or replace the reverse lever mechanism. If you are not comfortable with making the repair yourself, take the machine to a professional technician for repair.

BERNETTE sewing machine Spool Pin and Holder problems

The spool pin and holder on the BERNETTE sewing machine may be loose, broken, or not holding the thread spool properly.

Causes of the BERNETTE sewing machine Spool Pin and Holder problems

  1. Wear and tear over time
  2. Incorrect installation of the spool pin and holder
  3. Use of incorrect or oversized thread spools
  4. Tightening the spool holder too tightly

Troubleshooting BERNETTE sewing machine Spool Pin and Holder problems

  1. Unplug the machine from the power source.
  2. Remove any thread or fabric from the machine and the spool pin and holder.
  3. Inspect the spool pin and holder for any signs of damage or wear and tear.
  4. Check to see if the spool pin and holder are installed correctly according to the machine’s manual.
  5. If the spool pin and holder are installed correctly, try using a different size or type of thread spool to see if it fits better.
  6. If the spool holder is tightened too tightly, loosen it slightly and test the thread spool to see if it fits better.
  7. If the spool pin and holder are damaged or not holding the thread spool properly, refer to the machine’s manual for instructions on how to repair or replace them. If you are not comfortable with making the repair yourself, take the machine to a professional technician for repair.

BERNETTE sewing machine Pattern Selector problems

The pattern selector on the BERNETTE sewing machine is not working properly. The machine is not switching between the different stitch patterns or the selected stitch pattern is not being executed correctly.

Causes of the BERNETTE sewing machine Pattern Selector problems

  1. The pattern selector knob may be loose or not properly aligned with the selection mechanism.
  2. The selection mechanism inside the machine may be jammed or stuck.
  3. The pattern selector may be worn out or damaged.
  4. The machine may be threaded incorrectly or the tension may be too tight or too loose.

Troubleshooting BERNETTE sewing machine Pattern Selector problems

  1. Turn off the machine and unplug it from the power source.
  2. Check the pattern selector knob and make sure it is tight and properly aligned with the selection mechanism.
  3. Try switching between the different stitch patterns and see if the mechanism is moving properly. If it is not, the selection mechanism inside the machine may be jammed or stuck.
  4. Use a small brush to clean the selection mechanism and remove any debris that may be causing it to jam or stick.
  5. Check the pattern selector for any signs of wear or damage. If it is worn or damaged, it may need to be replaced.
  6. Check the threading of the machine and adjust the tension if necessary. Incorrect threading or improper tension can cause the machine to not execute the selected stitch pattern correctly.

BERNETTE sewing machine Stitch Length Adjustment problems

The stitch length adjustment on the BERNETTE sewing machine is not working properly. The machine is not changing the stitch length or the stitch length is not consistent.

Causes of the BERNETTE sewing machine Stitch Length Adjustment problems

  1. The stitch length adjustment knob may be loose or not properly aligned with the selection mechanism.
  2. The selection mechanism inside the machine may be jammed or stuck.
  3. The stitch length adjustment mechanism may be worn out or damaged.
  4. The machine may be threaded incorrectly or the tension may be too tight or too loose.

Troubleshooting BERNETTE sewing machine Stitch Length Adjustment problems

  1. Turn off the machine and unplug it from the power source.
  2. Check the stitch length adjustment knob and make sure it is tight and properly aligned with the selection mechanism.
  3. Try changing the stitch length and see if the mechanism is moving properly. If it is not, the selection mechanism inside the machine may be jammed or stuck.
  4. Use a small brush to clean the selection mechanism and remove any debris that may be causing it to jam or stick.
  5. Check the stitch length adjustment mechanism for any signs of wear or damage. If it is worn or damaged, it may need to be replaced.
  6. Check the threading of the machine and adjust the tension if necessary. Incorrect threading or improper tension can cause the machine to not change the stitch length correctly.

BERNETTE sewing machine Tension Disks problems

The tension disks on a BERNETTE sewing machine may become faulty or misaligned, causing improper stitching and thread breakage.

Causes of the BERNETTE sewing machine Tension Disks problems

  1. Build-up of lint or dust between the tension disks.
  2. Incorrect threading of the machine.
  3. Tension disks may have become misaligned or damaged.

Troubleshooting BERNETTE sewing machine Tension Disks problems

  1. Turn off the machine and unplug it from the power source.
  2. Remove the thread from the machine.
  3. Use a soft brush or lint roller to remove any lint or dust from the tension disks.
  4. Check the threading of the machine to ensure that it is correct.
  5. If the tension disks appear misaligned, take the machine to a qualified technician to have them adjusted or replaced.
  6. Plug the machine back in and re-thread it.
  7. Test the machine on a scrap of fabric to ensure proper stitching and tension.

BERNETTE sewing machine Needle Clamp problems

The needle clamp on a BERNETTE sewing machine may loosen or become damaged, causing the needle to fall out during sewing.

Causes of the BERNETTE sewing machine Needle Clamp problems

  1. Overtightening or undertightening of the needle clamp.
  2. A damaged or worn-out needle clamp.
  3. Using the wrong size needle for the machine.

Troubleshooting BERNETTE sewing machine Needle Clamp problems

  1. Turn off the machine and unplug it from the power source.
  2. Remove the needle from the machine.
  3. Inspect the needle clamp for damage or wear.
  4. Tighten or loosen the needle clamp as needed to hold the needle securely in place.
  5. If the needle clamp is damaged or worn, replace it with a new one.
  6. Ensure that the correct size needle is being used for the machine.
  7. Re-insert the needle and tighten the needle clamp securely.
  8. Plug the machine back in and test it on a scrap of fabric to ensure proper stitching.

Problem with BERNETTE sewing machine Take-Up Lever

The Take-Up Lever is responsible for regulating the tension of the upper thread and moving the thread through the machine. When there are problems with the Take-Up Lever, the upper thread may not be fed properly, causing the machine to skip stitches, produce uneven stitches, or break the thread.

Causes of the BERNETTE sewing machine Take-Up Lever problems

  1. Dust or lint accumulation
  2. Misaligned Take-Up Lever
  3. Improper threading
  4. Broken or worn-out parts
  5. Lack of maintenance

Troubleshooting BERNETTE sewing machine Take-Up Lever problems

  1. Turn off the sewing machine and unplug it from the power source.
  2. Remove the needle and the presser foot to access the Take-Up Lever.
  3. Check for dust or lint accumulation around the Take-Up Lever. Use a small brush or a vacuum to clean it.
  4. Check if the Take-Up Lever is properly aligned. If not, loosen the screw that holds it in place and adjust it to the correct position.
  5. Make sure that the machine is threaded properly. Refer to the manual if needed.
  6. Check if any parts of the Take-Up Lever are broken or worn-out. If yes, replace them.
  7. Apply a drop of oil to the Take-Up Lever and other moving parts of the machine.
  8. Turn on the sewing machine and test it with a piece of fabric.

Problem with BERNETTE sewing machine Presser Dial

The Presser Dial controls the pressure of the presser foot on the fabric. When there are problems with the Presser Dial, the fabric may not be held firmly, causing uneven stitches or the fabric to pucker.

Causes of the BERNETTE sewing machine Presser Dial problems

  1. Improper Presser Dial setting
  2. Dirty or worn-out Presser Dial
  3. Loose or broken parts
  4. Lack of maintenance

Troubleshooting BERNETTE sewing machine Presser Dial problems

  1. Turn off the sewing machine and unplug it from the power source.
  2. Check the Presser Dial setting. Adjust it to the appropriate level for the fabric you are using.
  3. Check if the Presser Dial is dirty or worn-out. If yes, clean it with a soft cloth or replace it.
  4. Check if any parts of the Presser Dial mechanism are loose or broken. Tighten or replace them if needed.
  5. Apply a drop of oil to the Presser Dial mechanism and other moving parts of the machine.
  6. Turn on the sewing machine and test it with a piece of fabric.

BERNETTE sewing machine Feed Dog problems

The feed dogs on your BERNETTE sewing machine are not moving fabric forward or are not doing so properly.

Causes of the BERNETTE sewing machine Feed Dog problems

  1. Feed dog is disengaged
  2. Feed dog is dirty or has lint buildup
  3. Feed dog is damaged or worn out
  4. Feed dog adjustment is incorrect

Troubleshooting BERNETTE sewing machine Feed Dog problems

  1. Check the feed dog lever to ensure it is engaged. If it is not engaged, adjust it as per the machine manual.
  2. Clean the feed dog by brushing away any lint or debris that may be stuck in the teeth.
  3. If the feed dog is damaged, take it to a professional for repair or replacement.
  4. Adjust the feed dog height as per the machine manual to ensure proper feeding.

BERNETTE sewing machine Throat Plate problems

The throat plate on your BERNETTE sewing machine is causing issues with fabric feeding, needle breaking, or incorrect stitching.

Causes of the BERNETTE sewing machine Throat Plate problems

  1. Throat plate is dirty or has lint buildup
  2. Throat plate is damaged or worn out
  3. Throat plate is not installed properly

Troubleshooting BERNETTE sewing machine Throat Plate problems

  1. Remove the throat plate and clean it with a soft brush, making sure to remove any lint or debris that may be stuck in the needle hole or around the edges of the plate.
  2. Inspect the throat plate for any signs of damage or wear, and if necessary, replace it with a new one.
  3. Ensure that the throat plate is installed correctly and is sitting flush with the surface of the machine. If it is not, adjust it as per the machine manual.

BERNETTE sewing machine Sewing Light problems

The sewing light on your BERNETTE sewing machine may not be turning on, flickering or turning off during use.

Causes of the BERNETTE sewing machine Sewing Light problems

  1. Burnt out bulb
  2. Loose wiring connections
  3. Faulty power source
  4. Defective switch

Troubleshooting BERNETTE sewing machine Sewing Light problems

  1. Turn off the sewing machine and unplug it from the power source.
  2. Remove the bulb from the socket and inspect it for any signs of damage or burnout. Replace the bulb if necessary.
  3. Check the wiring connections around the light socket and make sure they are secure and free from any damage or corrosion.
  4. If the wiring connections are loose or damaged, carefully reconnect or replace them.
  5. Plug the machine back in and turn it on to test if the sewing light is working properly. If not, proceed to the next step.
  6. Check the power source and make sure it is providing enough power to the machine. Try plugging the machine into a different power outlet or power source to rule out any issues with the power supply.
  7. If the power source is not the issue, the switch may be defective and need to be replaced. Consult the machine manual or a professional technician for further assistance.

BERNETTE sewing machine Presser Foot Lever problems

The presser foot lever on your BERNETTE sewing machine may not be raising or lowering properly, or may be stuck in one position.

Causes of the BERNETTE sewing machine Presser Foot Lever problems

  1. Obstruction preventing the lever from moving
  2. Loose or damaged presser foot lever mechanism
  3. Mechanical issues with the machine

Troubleshooting BERNETTE sewing machine Presser Foot Lever problems

  1. Turn off the sewing machine and unplug it from the power source.
  2. Check the area around the presser foot lever for any obstructions such as fabric or debris that may be preventing the lever from moving.
  3. If there are no obstructions, inspect the presser foot lever mechanism for any signs of looseness or damage. Tighten any loose parts and replace any damaged parts if necessary.
  4. Plug the machine back in and turn it on to test if the presser foot lever is working properly. If not, proceed to the next step.
  5. If the presser foot lever mechanism appears to be in good condition, there may be mechanical issues with the machine that require professional assistance. Consult the machine manual or a professional technician for further assistance.

BERNETTE sewing machine Slide Plate problems

The slide plate on the sewing machine is not sliding properly or is stuck in place.

Causes of the BERNETTE sewing machine Slide Plate problems

Dirt and debris in the slide plate track, broken slide plate spring, or a damaged slide plate.

Troubleshooting BERNETTE sewing machine Slide Plate problems

  • Step 1: Turn off the machine and unplug it from the power source.
  • Step 2: Remove the slide plate by gently pulling it towards you.
  • Step 3: Clean the slide plate and the track where it slides with a soft-bristled brush to remove any dirt or debris that might be causing it to stick.
  • Step 4: Check the slide plate spring to see if it is broken or damaged. If it is, you will need to replace it.
  • Step 5: If the slide plate itself is damaged, you will also need to replace it.
  • Step 6: Reinsert the slide plate into the track, making sure it slides easily.

BERNETTE sewing machine Bobbin Case problems

The bobbin case is not staying in place, causing the thread to tangle or jam.

Causes of the BERNETTE sewing machine Bobbin Case problems

Improper installation of the bobbin case, dirt and debris in the bobbin case area, or a damaged bobbin case.

Troubleshooting BERNETTE sewing machine Bobbin Case problems

  • Step 1: Turn off the machine and unplug it from the power source.
  • Step 2: Remove the needle plate and the bobbin case.
  • Step 3: Clean the area where the bobbin case sits using a soft-bristled brush to remove any dirt or debris that might be causing the case to shift.
  • Step 4: Reinsert the bobbin case, making sure it is properly installed and secured.
  • Step 5: If the bobbin case is damaged, replace it with a new one.
  • Step 6: Replace the needle plate and test the machine.

BERNETTE sewing machine Bobbin problems

The bobbin thread is not feeding properly or is tangling, causing the machine to jam.

Causes of the BERNETTE sewing machine Bobbin problems

Incorrect threading of the bobbin, damaged or worn-out bobbin, or dirt and debris in the bobbin area.

Troubleshooting BERNETTE sewing machine Bobbin problems

  • Step 1: Turn off the machine and unplug it from the power source.
  • Step 2: Remove the bobbin from the bobbin case and clean the area using a soft-bristled brush to remove any dirt or debris that might be causing the problem.
  • Step 3: Check the bobbin for any signs of damage or wear. If it is damaged, replace it with a new one.
  • Step 4: Check that the bobbin is properly threaded, making sure the thread is feeding in the right direction and is taut.
  • Step 5: Reinsert the bobbin into the bobbin case, making sure it is properly installed and secured.
  • Step 6: Test the machine to make sure the problem is resolved.

10 Common Problems with BERNETTE Sewing Machines

In addition to the common problems listed above, BERNETTE sewing machines can also experience the following issues:

  1. Stitch Problems
  2. Upper thread breaking
  3. Breaking needles problems
  4. Bobbin winding problems
  5. Bobbin thread problems
  6. Bobbin holder problems
  7. Bobbin tension problems
  8. Sewing Machine Keep Jamming
  9. Tension problems
  10. Sewing machine not feeding fabric

FAQ

Where can I find replacement parts for my BERNETTE sewing machine?

You can find replacement parts for your BERNETTE sewing machine at authorized dealers or on the BERNETTE website.

Can I use generic parts for my BERNETTE sewing machine?

It is not recommended to use generic parts for your BERNETTE sewing machine as it may affect the machine’s performance and potentially cause damage.

How often should I replace my BERNETTE sewing machine needle?

It is recommended to replace your BERNETTE sewing machine needle after every 8 hours of use or after completing a project.

How can I tell if my BERNETTE sewing machine needs a new belt?

If you notice that your machine is not running smoothly or is making a grinding noise, it may be time to replace the belt. You can check the belt for signs of wear or damage as well.

Can I adjust the tension on my BERNETTE sewing machine?

Yes, most BERNETTE sewing machines allow you to adjust the tension. Consult your machine’s manual for specific instructions on how to do this.

Conclusion. Troubleshooting BERNETTE Sewing machine parts

In conclusion, BERNETTE sewing machines are reliable and efficient machines that can last for years with proper maintenance. However, like any other machine, they can experience problems with their parts that require troubleshooting. By following the steps outlined in this article, you can identify and fix common BERNETTE sewing machine parts problems, ensuring that your machine operates smoothly and efficiently. Remember to always refer to the manufacturer’s manual and seek professional help if necessary.

Leave a Comment