Singer 1304 sewing machine bobbin tension problems

Are you having trouble with the bobbin tension on your Singer 1304 sewing machine? If so, don’t worry – it’s a common problem and can be easily fixed. In this article, we’ll talk about how to diagnose the issue, as well as how to adjust the bobbin tension and thread the machine correctly. We’ll also cover some basic tips for troubleshooting bobbin problems and ensuring that your stitches look great! So let’s get started!

What is the Singer 1304 sewing machine bobbin tension?

Tension describes the amount of pull on the thread and correlates to the tightness of your stitches. Too much tension, the thread ends are pulled to far apart and the thread might snap. Too little tension, the thread will sag or not lay flat on the fabric because there is too much slack.

The tension of the thread in the bobbin case is regulated by a small screw that adjusts the distance between two pieces of the bobbin case. Tightening this screw increases pressure on the thread while loosening it decreases pressure.

What does good Singer 1304 sewing machine bobbin tension look like?

The thread tension between the upper and bobbin threads plays an important role in forming good quality stitches. When stitched properly, the threads should come together in a neat union at the fabric’s center and secure one another without any discrepancies. Your bobbin thread should remain invisible on the top side of your project, while the upper thread must not be seen from underneath.

If there’s an issue with your bobbin tension, it will show up in how the two threads appear when stitched together. You might be able to spot this by looking at a section of stitching that doesn’t look right – for example, if the bobbin thread is visible on top of the fabric or the upper thread pulls out easily. It’s better to check and adjust the bobbin tension before you start working on your next project so you can avoid any potential problems with your fabric!

What tips can you give for troubleshooting bobbin problems?

• Make sure the spool of thread is placed correctly on your machine. Check that the thread is moving freely and not caught between any parts.

• Check if the bobbin case is inserted properly in the machine – it should be flush with the machine body when inserted.

• Clean out any dust or lint from inside the bobbin case, as well as from behind the needle plate of your machine.

• The tension disk/spring should be located at a 45 degree angle to ensure optimal tension on your thread. If it isn’t, adjust it until it is so you can get better stitch quality.

– Use high quality thread and needles for smooth, even stitching.

– Don’t forget to oil your machine regularly – this will help keep it running smoothly for a longer period of time.

– Finally, make sure the bobbin winder is loosened before you start sewing, otherwise it can cause problems with the tension on the thread.

Following these tips will help you troubleshoot any bobbin problems you may be having with your Singer 1304 sewing machine. Good luck!

How do you fix the bobbin tension on a Singer 1304 sewing machine?

Bobbin tension issues can be a common problem when using the Singer 1304 sewing machine. How do I reset the bobbin tension? To troubleshoot this issue, you need to remove the faceplate of the machine and take out the bobbin and its case via the hinged latch. 

Then use a screwdriver to turn the screw on the side of the bobbin case either clockwise increase the bobbin tension or counterclockwise to decrease it, testing the tension by pulling on the bobbin thread. 

Once this is adjusted correctly and the faceplate is secured again, test a seam by sewing on the diagonal of fabric and ensure that the stitches look even on both sides with no single thread breaking when pulled. With this method, you be able to troubleshoot bobbin tension issues and get your Singer 1304 sewing machine back up and running.

Singer 1304 Sewing Machine Bobbin Tension Guide Summary(with Table)

Here’s a table summarizing the information about Singer 1304 sewing machine bobbin tension:

Bobbin Tension DefinitionTension refers to the pull on the thread, affecting stitch tightness. Adjusted by a screw in the bobbin case.
Effects of Incorrect TensionToo much tension can cause thread breakage; too little may result in sagging threads.
Adjusting Bobbin TensionUse a small screw to regulate tension in the bobbin case. Tightening increases, loosening decreases pressure.
Ideal Bobbin Tension AppearanceProper tension results in neat stitches, threads meeting at the fabric center, and invisibility of bobbin thread.
Spotting Bobbin Tension IssuesCheck for visible bobbin thread on top, upper thread showing underneath, or irregular stitching.
Tips for TroubleshootingProper spool placement, correct bobbin case insertion, cleaning, optimal tension disk angle, quality materials, regular oiling, and checking bobbin winder.
Fixing Bobbin TensionRemove faceplate, take out bobbin and case, use a screwdriver to adjust tension screw clockwise or counterclockwise. Test stitches for evenness.
Thread Bobbin Tension TestHold bobbin thread – no movement indicates ideal tension. Slight downward movement is acceptable. Quick drop signals loose tension. Test by sewing with different colored threads or the same thread on fabric type used for the project.

Singer 1304 sewing machine Thread bobbin Tension Test

To accurately assess tension, insert the bobbin into its case. Hold it up using only the thread and if the bobbin case remains immobilized, then your tension is well-adjusted. If you pull on the thread gently and observe any slight downward movement in your bobbin casing, that is an ideal sign of perfect tension! Alternatively, when a quick tug causes your casing to drop freely—then you know it’s too loose.

To test the tension of your Singer 1304 sewing machine bobbin thread, it is best to sew a few stitches with two different colored threads (one for the top and one for the bottom) so that you can easily identify any possible tension issues. Alternatively, you can use the same thread but make sure there are enough stitches to properly evaluate the tension.

Additionally, it is important to sew your test stitches on the same type of fabric that you will be using for your project so you don’t have to adjust the tension again when beginning work on it.


What happens if bobbin tension is too loose?

If your bobbin thread isn’t forming the correct stitches with the top thread, it could cause fabric puckering, tension build-up and broken threads. Not to mention, improper stitching lines. All of these issues can be avoided by ensuring that your bobbin thread is properly adjusted in relation to the upper thread.

What happens if the bobbin tension is too high?

When your tension is set too tight, the thread may be pulled through to the top of your fabric. Additionally, it can cause an odd stitch and create bunching throughout the material. To remedy this issue remember that “lower” and “loosen” both begin with ‘L’. Simply lower your number on the dial to achieve a more relaxed tension!

What Tension Should Your Sewing Machine Be On?

Sewing machines typically possess tension dials ranging from 0 to 9. For the majority of regular tasks and conventional stitches, your machine’s tension should ideally stand at 4.5 – a setting that may not be obtainable on every machine. Nonetheless, 3, 4 or 5 will do nearly as well for most projects you have in mind!

What Tension Should I Use For Thick Fabric?

For thicker fabrics, a tension of 4 or 5 should be the perfect fit. However, bulkier and elastic materials like fleece might need a slightly weaker tension to prevent fabric displacement while sewing; in this case, 3 is ideal.

Conclusion. Singer 1304 sewing machine bobbin tension problems

In conclusion, bobbin tension issues on Singer 1304 sewing machines can be a common problem. However, by following the right steps and using the necessary tools, it is possible to easily adjust the tension and get the machine back in working order.

With the proper setup, you will have a reliable sewing machine that can provide successful projects with ease. Ultimately, learning how to properly adjust the tension on Singer 1304 is an important part of becoming a confident and experienced sewer!

Leave a Comment